LLDP-EXT-DOT1-V2-MIB
Standards (IEEE)The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. In order to ensure the uniqueness of the LLDP-V2-MIB, lldpV2Xdot1MIB is branched from lldpV2Extensions using an Organizationally Unique Identifier (OUI) value as the node. An OUI is a 24 bit globally unique number assigned by the IEEE Registration Authority - see: http://standards.ieee.org/develop/regauth/oui/index.html Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is published as D.5.5 of IEEE Std 802.1Q; see the standard itself for full legal notices.
snmptranslate -m LLDP-EXT-DOT1-V2-MIB -Tpsnmpwalk -v2c -c <community> -m LLDP-EXT-DOT1-V2-MIB <host> 1.3.111.2.802.1.1.13.1.5.32962Imports
| IEEE8021-TC-MIB | IEEE8021PriorityValue |
|---|---|
| IF-MIB | ifGeneralInformationGroup |
| LLDP-V2-MIB | lldpV2Extensions, lldpV2LocPortIfIndex, lldpV2PortConfigEntry, lldpV2RemIndex, lldpV2RemLocalDestMACAddress, lldpV2RemLocalIfIndex, lldpV2RemTimeMark |
| Q-BRIDGE-MIB | VlanId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IlldpV2Xdot1MIB | 1.3.111.2.802.1.1.13.1.5.32962 | |||
identity The LLDP Management Information Base extension module for IEEE 802.1 organizationally defined discovery information. In order to ensure the uniqueness of the LLDP-V2-MIB, lldpV2Xdot1MIB is branched from lldpV2Extensions using an Organizationally Unique Identifier (OUI) value as the node. An OUI is a 24 bit globally unique number assigned by the IEEE Registration Authority - see: http://standards.ieee.org/develop/regauth/oui/index.html Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q. Copyright (C) IEEE (2018). This version of this MIB module is published as D.5.5 of IEEE Std 802.1Q; see the standard itself for full legal notices. | ||||
| NlldpV2Xdot1Objects | 1.3.111.2.802.1.1.13.1.5.32962.1 | |||
| NlldpV2Xdot1Config | 1.3.111.2.802.1.1.13.1.5.32962.1.1 | |||
| TlldpV2Xdot1ConfigPortVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.1 | NA | ||
table · not-accessible · current A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports. | ||||
| RlldpV2Xdot1ConfigPortVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpV2Xdot1ConfigPortVlanTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpV2Xdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpV2Xdot1ConfigVlanNameTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.2 | NA | ||
table · not-accessible · current The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports. | ||||
| RlldpV2Xdot1ConfigVlanNameEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1 | NA | ||
row · not-accessible · current LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance is transmitted. This configuration object augments the lldpV2LocVlanEntry, therefore it is only present along with the VLAN Name instance contained in the associated lldpV2LocVlanNameEntry entry. Each active lldpV2Xdot1ConfigVlanNameEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocVlanNameEntry) after a re-initialization of the management system.
| ||||
| ClldpV2Xdot1ConfigVlanNameTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.2.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The boolean value that indicates whether the corresponding Local System VLAN name instance is transmitted on the port defined by the given lldpV2Xdot1LocVlanNameEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpV2Xdot1ConfigProtoVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.3 | NA | ||
table · not-accessible · current The table that controls selection of LLDP Port And Protocol VLAN ID TLV instances to be transmitted on individual ports. | ||||
| RlldpV2Xdot1ConfigProtoVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1 | NA | ||
row · not-accessible · current LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance is transmitted. This configuration object augments the lldpV2Xdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpV2Xdot1LocVlanEntry entry. Each active lldpV2Xdot1ConfigProtoVlanEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocProtoVlanEntry) after a re-initialization of the management system.
| ||||
| ClldpV2Xdot1ConfigProtoVlanTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.3.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance is transmitted on the port defined by the given lldpV2Xdot1LocProtoVlanEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpV2Xdot1ConfigProtocolTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.4 | NA | ||
table · not-accessible · current The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports. | ||||
| RlldpV2Xdot1ConfigProtocolEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1 | NA | ||
row · not-accessible · current LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance is transmitted. This configuration object augments the lldpV2Xdot1LocProtoEntry, therefore it is only present along with the Protocol instance contained in the associated lldpV2Xdot1LocProtoEntry entry. Each active lldpV2Xdot1ConfigProtocolEntry is restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocProtocolEntry) after a re-initialization of the management system.
| ||||
| ClldpV2Xdot1ConfigProtocolTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.4.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The boolean value that indicates whether the corresponding Local System Protocol Identity instance is transmitted on the port defined by the given lldpV2Xdot1LocProtocolEntry. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpV2Xdot1ConfigVidUsageDigestTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.5 | NA | ||
table · not-accessible · current A table that controls selection of LLDP VID Usage Digest TLVs to be transmitted on individual ports. | ||||
| RlldpV2Xdot1ConfigVidUsageDigestEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1 | NA | ||
row · not-accessible · current LLDP configuration information that specifies the set of ports (represented as a PortList) on which the local system VID Usage Digest instance will be transmitted. This configuration object augments the lldpLocVidUsageDigestEntry, therefore it is only present along with the VID Usage Digest instance contained in the associated lldpV2Xdot1LocVidUsageDigestEntry entry. Each active lldpConfigVidUsageDigestEntry must be restored from non-volatile storage and re-created (along with the corresponding lldpV2Xdot1LocVidUsageDigestEntry) after a re-initialization of the management system. | ||||
| ClldpV2Xdot1ConfigVidUsageDigestTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.5.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The boolean value that indicates whether the corresponding Local System VID Usage Digest instance will be transmitted on the port defined by the given lldpV2Xdot1LocVidUsageDigestEntry. The value of this object must be restored from non-volatile storage after a reinitialization of the management system. | ||||
| TlldpV2Xdot1ConfigManVidTable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.6 | NA | ||
table · not-accessible · current A table that controls selection of LLDP Management VID TLVs to be transmitted on individual ports. | ||||
| RlldpV2Xdot1ConfigManVidEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1 | NA | ||
row · not-accessible · current LLDP configuration information that specifies the set of port/destination address pairs on which the Local System Management VID will be transmitted. This configuration object augments the lldpV2Xdot1LocManVidEntry, therefore it is only present along with the Management VID contained in the associated lldpV2Xdot1LocManVidEntry entry. Each active lldpV2Xdot1ConfigManVidEntry must be restored from non-volatile storage (along with the corresponding lldpV2Xdot1LocManVidEntry) after a re-initialization of the management system.
| ||||
| ClldpV2Xdot1ConfigManVidTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.1.1.6.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpV2Xdot1ConfigManVidTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Management VID TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. | ||||
| NlldpV2Xdot1LocalData | 1.3.111.2.802.1.1.13.1.5.32962.1.2 | |||
| TlldpV2Xdot1LocTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.1 | NA | ||
table · not-accessible · current This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent. | ||||
| RlldpV2Xdot1LocEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1 | NA | ||
row · not-accessible · current Information about IEEE 802.1 organizationally defined LLDP extension.
| ||||
| ClldpV2Xdot1LocPortVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.1.1.1 | Unsigned32 (0 | 1..4094) | RO | |
column · Unsigned32 (0 | 1..4094) · read-only · current The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support Port-based VLAN operation. | ||||
| TlldpV2Xdot1LocProtoVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2 | NA | ||
table · not-accessible · current This table contains one or more rows per Port and Protocol VLAN information about the local system. | ||||
| RlldpV2Xdot1LocProtoVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1 | NA | ||
row · not-accessible · current Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpV2Xdot1LocProtoVlanId, configured on the given port. | ||||
| ClldpV2Xdot1LocProtoVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.1 | Unsigned32 (0 | 1..4094) | NA | |
column · Unsigned32 (0 | 1..4094) · not-accessible · current The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation. | ||||
| ClldpV2Xdot1LocProtoVlanSupported | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs. | ||||
| ClldpV2Xdot1LocProtoVlanEnabled | 1.3.111.2.802.1.1.13.1.5.32962.1.2.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system. | ||||
| TlldpV2Xdot1LocVlanNameTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3 | NA | ||
table · not-accessible · current This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent. | ||||
| RlldpV2Xdot1LocVlanNameEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1 | NA | ||
row · not-accessible · current VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpV2Xdot1LocVlanId, configured on the given port. | ||||
| ClldpV2Xdot1LocVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.1 | VlanId | NA | |
column · VlanId · not-accessible · current The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible. | ||||
| ClldpV2Xdot1LocVlanName | 1.3.111.2.802.1.1.13.1.5.32962.1.2.3.1.2 | SnmpAdminString (SIZE (1..32)) | RO | |
column · SnmpAdminString (SIZE (1..32)) · read-only · current The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 4363) identified with the given lldpV2Xdot1LocVlanId. | ||||
| TlldpV2Xdot1LocProtocolTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4 | NA | ||
table · not-accessible · current This table contains one or more rows per protocol identity information on the local system known to this agent. | ||||
| RlldpV2Xdot1LocProtocolEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1 | NA | ||
row · not-accessible · current Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpV2Xdot1ProtocolIndex, lldpV2LocPortIfIndex | ||||
| ClldpV2Xdot1LocProtocolIndex | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. | ||||
| ClldpV2Xdot1LocProtocolId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.4.1.2 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The octet string value used to identify the protocols associated with the given port of the local system. | ||||
| TlldpV2Xdot1LocVidUsageDigestTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.5 | NA | ||
table · not-accessible · current This table contains one row per ifIndex/ destination MAC address pair for usage digest information on the local system known to this agent. | ||||
| RlldpV2Xdot1LocVidUsageDigestEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1 | NA | ||
row · not-accessible · current Usage digest information to be transmitted through the given port.
| ||||
| ClldpV2Xdot1LocVidUsageDigest | 1.3.111.2.802.1.1.13.1.5.32962.1.2.5.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE) and otherwise contains the value NON-PBB-TE-USAGE (binary 0). | ||||
| TlldpV2Xdot1LocManVidTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.6 | NA | ||
table · not-accessible · current This table contains one row per ifIndex/ destination MAC address pair for usage digest information on the local system known to this agent. | ||||
| RlldpV2Xdot1LocManVidEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1 | NA | ||
row · not-accessible · current Usage digest information to be transmitted through the given port.
| ||||
| ClldpV2Xdot1LocManVid | 1.3.111.2.802.1.1.13.1.5.32962.1.2.6.1.1 | Unsigned32 (0 | 1..4094) | RO | |
column · Unsigned32 (0 | 1..4094) · read-only · current The integer value configured on the Local system for the Management VID, or the value 0 if a Management VID has not been provisioned. | ||||
| TlldpV2Xdot1LocLinkAggTable | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7 | NA | ||
table · not-accessible · current This table contains one row per port of link aggregation information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent. | ||||
| RlldpV2Xdot1LocLinkAggEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1 | NA | ||
row · not-accessible · current Link Aggregation information about a particular port component.
| ||||
| ClldpV2Xdot1LocLinkAggStatus | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.1 | LldpV2XLinkAggStatusMap | RO | |
column · LldpV2XLinkAggStatusMap · read-only · current The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. | ||||
| ClldpV2Xdot1LocLinkAggPortId | 1.3.111.2.802.1.1.13.1.5.32962.1.2.7.1.2 | Unsigned32 (0 | 1..2147483647) | RO | |
column · Unsigned32 (0 | 1..2147483647) · read-only · current This object contains the IEEE 802.1 aggregated port identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero. | ||||
| NlldpV2Xdot1RemoteData | 1.3.111.2.802.1.1.13.1.5.32962.1.3 | |||
| TlldpV2Xdot1RemTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.1 | NA | ||
table · not-accessible · current This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpV2Xdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpV2Xdot1RemEntries for the same local port. | ||||
| RlldpV2Xdot1RemEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1 | NA | ||
row · not-accessible · current Information about a particular port component. | ||||
| ClldpV2Xdot1RemPortVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.1.1.1 | Unsigned32 (0 | 1..4094) | RO | |
column · Unsigned32 (0 | 1..4094) · read-only · current The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support Port-based VLAN operation, the value of lldpV2Xdot1RemPortVlanId should be zero. | ||||
| TlldpV2Xdot1RemProtoVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2 | NA | ||
table · not-accessible · current This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port. | ||||
| RlldpV2Xdot1RemProtoVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1 | NA | ||
row · not-accessible · current Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpV2Xdot1RemProtoVlanId, configured on the remote system. | ||||
| ClldpV2Xdot1RemProtoVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.1 | Unsigned32 (0 | 1..4094) | NA | |
column · Unsigned32 (0 | 1..4094) · not-accessible · current The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpV2Xdot1RemProtoVlanId should be zero. | ||||
| ClldpV2Xdot1RemProtoVlanSupported | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs. | ||||
| ClldpV2Xdot1RemProtoVlanEnabled | 1.3.111.2.802.1.1.13.1.5.32962.1.3.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system. | ||||
| TlldpV2Xdot1RemVlanNameTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3 | NA | ||
table · not-accessible · current This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port. | ||||
| RlldpV2Xdot1RemVlanNameEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1 | NA | ||
row · not-accessible · current VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpV2Xdot1RemVlanId, received on the given port. | ||||
| ClldpV2Xdot1RemVlanId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.1 | VlanId | NA | |
column · VlanId · not-accessible · current The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible. | ||||
| ClldpV2Xdot1RemVlanName | 1.3.111.2.802.1.1.13.1.5.32962.1.3.3.1.2 | SnmpAdminString (SIZE (1..32)) | RO | |
column · SnmpAdminString (SIZE (1..32)) · read-only · current The string value used to identify VLAN name identified by the VLAN Id associated with the remote system. | ||||
| TlldpV2Xdot1RemProtocolTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4 | NA | ||
table · not-accessible · current This table contains one or more rows per protocol information about the remote system, received on the given port. | ||||
| RlldpV2Xdot1RemProtocolEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1 | NA | ||
row · not-accessible · current Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpV2Xdot1ProtocolIndex, received on the given port. | ||||
| ClldpV2Xdot1RemProtocolIndex | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.1 | Unsigned32 (1..2147483647) | NA | |
column · Unsigned32 (1..2147483647) · not-accessible · current This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity. | ||||
| ClldpV2Xdot1RemProtocolId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.4.1.2 | OCTET STRING (SIZE (1..255)) | RO | |
column · OCTET STRING (SIZE (1..255)) · read-only · current The octet string value used to identify the protocols associated with the given port of remote system. | ||||
| TlldpV2Xdot1RemVidUsageDigestTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.5 | NA | deprecated | |
table · not-accessible · deprecated This table contains one row per ifIndex/ destination MAC address pair for usage digest information received by the local system. | ||||
| RlldpV2Xdot1RemVidUsageDigestEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1 | NA | deprecated | |
row · not-accessible · deprecated Usage digest information received on the given port/destination address pair. | ||||
| ClldpV2Xdot1RemVidUsageDigest | 1.3.111.2.802.1.1.13.1.5.32962.1.3.5.1.1 | Unsigned32 | RO | deprecated |
column · Unsigned32 · read-only · deprecated The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE)and otherwise contains the value NON-PBB-TE-USAGE (binary 0). | ||||
| TlldpV2Xdot1RemManVidTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.6 | NA | deprecated | |
table · not-accessible · deprecated This table contains one row per ifIndex/ destination MAC address pair for management VID information received from remote systems. | ||||
| RlldpV2Xdot1RemManVidEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1 | NA | deprecated | |
row · not-accessible · deprecated Management VID information received through the given port/destination address pair. | ||||
| ClldpV2Xdot1RemManVid | 1.3.111.2.802.1.1.13.1.5.32962.1.3.6.1.1 | Unsigned32 (0 | 1..4094) | RO | deprecated |
column · Unsigned32 (0 | 1..4094) · read-only · deprecated The integer value configured on a system for the Management VID, or the value 0 if a Management VID has not been provisioned. | ||||
| TlldpV2Xdot1RemLinkAggTable | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7 | NA | ||
table · not-accessible · current This table contains port link aggregation information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system. | ||||
| RlldpV2Xdot1RemLinkAggEntry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1 | NA | ||
row · not-accessible · current Link Aggregation information about remote system's port component. | ||||
| ClldpV2Xdot1RemLinkAggStatus | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.1 | LldpV2XLinkAggStatusMap | RO | |
column · LldpV2XLinkAggStatusMap · read-only · current The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. | ||||
| ClldpV2Xdot1RemLinkAggPortId | 1.3.111.2.802.1.1.13.1.5.32962.1.3.7.1.2 | Unsigned32 (0 | 1..2147483647) | RO | |
column · Unsigned32 (0 | 1..2147483647) · read-only · current This object contains the IEEE 802.1 aggregated port identifier, aAggPortID (IEEE Std 802.1AX, 6.3.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero. | ||||
| TlldpV2Xdot1RemVidUsageDigestV2Table | 1.3.111.2.802.1.1.13.1.5.32962.1.3.8 | NA | ||
table · not-accessible · current This table contains one row per ifIndex/ destination MAC address pair for usage digest information received by the local system. | ||||
| RlldpV2Xdot1RemVidUsageDigestV2Entry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.8.1 | NA | ||
row · not-accessible · current Usage digest information received on the given port/destination address pair. | ||||
| ClldpV2Xdot1RemVidUsageDigestV2 | 1.3.111.2.802.1.1.13.1.5.32962.1.3.8.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The integer value obtained by applying the CRC32 function to the 128-octet VID Usage Table. A bit of the VID Usage Table contains the value PBB-TE-USAGE (binary 1) if the corresponding element of the MST Configuration Table (IEEE Std 802.1Q 8.9.1) contains the value PBB-TE MSTID (hex FFE)and otherwise contains the value NON-PBB-TE-USAGE (binary 0). | ||||
| TlldpV2Xdot1RemManVidV2Table | 1.3.111.2.802.1.1.13.1.5.32962.1.3.9 | NA | ||
table · not-accessible · current This table contains one row per ifIndex/ destination MAC address pair for management VID information received from remote systems. | ||||
| RlldpV2Xdot1RemManVidV2Entry | 1.3.111.2.802.1.1.13.1.5.32962.1.3.9.1 | NA | ||
row · not-accessible · current Management VID information received through the given port/destination address pair. | ||||
| ClldpV2Xdot1RemManVidV2 | 1.3.111.2.802.1.1.13.1.5.32962.1.3.9.1.1 | Unsigned32 (0 | 1..4094) | RO | |
column · Unsigned32 (0 | 1..4094) · read-only · current The integer value configured on a system for the Management VID, or the value 0 if a Management VID has not been provisioned. | ||||
| NlldpV2Xdot1Conformance | 1.3.111.2.802.1.1.13.1.5.32962.2 | |||
| NlldpV2Xdot1Compliances | 1.3.111.2.802.1.1.13.1.5.32962.2.1 | |||
| MlldpV2Xdot1TxRxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.2.1.1 | |||
compliance · current A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for all agents that implement the LLDP 802.1 organizational extension in TX and/or RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB. | ||||
| MlldpV2Xdot1TxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.2.1.2 | |||
compliance · current A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
| ||||
| MlldpV2Xdot1RxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.2.1.3 | deprecated | ||
compliance · deprecated A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
| ||||
| MlldpV2Xdot1RxComplianceV2 | 1.3.111.2.802.1.1.13.1.5.32962.2.1.4 | |||
compliance · current A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined LLDP extension MIB. This group is mandatory for agents that implement the LLDP 802.1 organizational extension in the RX mode for the basicSet TLV set. This version defines compliance requirements for V2 of the LLDP MIB.
| ||||
| NlldpV2Xdot1Groups | 1.3.111.2.802.1.1.13.1.5.32962.2.2 | |||
| GlldpV2Xdot1ConfigGroup | 1.3.111.2.802.1.1.13.1.5.32962.2.2.1 | |||
group · current The collection of objects which are used to configure the IEEE 802.1 organizationally defined LLDP extension implementation behavior for the basicSet TLV set. | ||||
| GlldpV2Xdot1LocSysGroup | 1.3.111.2.802.1.1.13.1.5.32962.2.2.2 | |||
group · current The collection of objects which are used to represent IEEE 802.1 organizationally defined LLDP extension associated with the Local Device Information for the basicSet TLV set. | ||||
| GlldpV2Xdot1RemSysGroup | 1.3.111.2.802.1.1.13.1.5.32962.2.2.3 | deprecated | ||
group · deprecated The collection of objects which are used to represent LLDP 802.1 organizational extension Remote Device Information for the basicSet TLV set. | ||||
| GlldpV2Xdot1RemSysV2Group | 1.3.111.2.802.1.1.13.1.5.32962.2.2.4 | |||
group · current The collection of objects which are used to represent LLDP 802.1 organizational extension Remote Device Information for the basicSet TLV set. | ||||
| NlldpXdot1CnMIB | 1.3.111.2.802.1.1.13.1.5.32962.3 | |||
| NlldpXdot1CnObjects | 1.3.111.2.802.1.1.13.1.5.32962.3.1 | |||
| NlldpXdot1CnConfig | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1 | |||
| TlldpXdot1CnConfigCnTable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1 | NA | ||
table · not-accessible · current A table that controls selection of Congestion Notification TLVs to be transmitted on individual ports. | ||||
| RlldpXdot1CnConfigCnEntry | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Congestion Notification TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpXdot1CnConfigCnTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.1.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpXdot1CnConfigCnTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Congestion Notification TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| NlldpXdot1CnLocalData | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2 | |||
| TlldpV2Xdot1LocCnTable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1 | NA | ||
table · not-accessible · current This table contains one row per port of Congestion Notification information (as a part of the LLDP 802.1 organizational extension) on the local system known to this agent. | ||||
| RlldpV2Xdot1LocCnEntry | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1 | NA | ||
row · not-accessible · current Congestion Notification information about a particular port component.
| ||||
| ClldpV2Xdot1LocCNPVIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.1 | LldpV2CnBitVector | RO | |
column · LldpV2CnBitVector · read-only · current This object contains the CNPV indicators for the Port. | ||||
| ClldpV2Xdot1LocReadyIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.2.1.1.2 | LldpV2CnBitVector | RO | |
column · LldpV2CnBitVector · read-only · current This object contains the Ready indicators for the Port. | ||||
| NlldpXdot1CnRemoteData | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3 | |||
| TlldpV2Xdot1RemCnTable | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1 | NA | ||
table · not-accessible · current This table contains Congestion Notification information (as a part of the LLDP IEEE 802.1 organizational extension) of the remote system. | ||||
| RlldpV2Xdot1RemCnEntry | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1 | NA | ||
row · not-accessible · current Port Extension information about remote systems port component. | ||||
| ClldpV2Xdot1RemCNPVIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.1 | LldpV2CnBitVector | RO | |
column · LldpV2CnBitVector · read-only · current This object contains the CNPV indicators for the Port. | ||||
| ClldpV2Xdot1RemReadyIndicators | 1.3.111.2.802.1.1.13.1.5.32962.3.1.3.1.1.2 | LldpV2CnBitVector | RO | |
column · LldpV2CnBitVector · read-only · current This object contains the Ready indicators for the Port. | ||||
| NlldpXdot1CnConformance | 1.3.111.2.802.1.1.13.1.5.32962.4 | |||
| NlldpXdot1CnCompliances | 1.3.111.2.802.1.1.13.1.5.32962.4.1 | |||
| MlldpXdot1CnCompliance | 1.3.111.2.802.1.1.13.1.5.32962.4.1.1 | |||
compliance · current A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined Congestion Notification LLDP extension MIB. This group is mandatory for agents that implement the Congestion Notification cnSet TLV set. | ||||
| NlldpXdot1CnGroups | 1.3.111.2.802.1.1.13.1.5.32962.4.2 | |||
| GlldpXdot1CnGroup | 1.3.111.2.802.1.1.13.1.5.32962.4.2.1 | |||
group · current The collection of objects that support the Congestion Notification cnSet TLV set. | ||||
| NlldpXdot1dcbxMIB | 1.3.111.2.802.1.1.13.1.5.32962.5 | |||
| NlldpXdot1dcbxObjects | 1.3.111.2.802.1.1.13.1.5.32962.5.1 | |||
| NlldpXdot1dcbxConfig | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1 | |||
| TlldpXdot1dcbxConfigETSConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1 | NA | ||
table · not-accessible · current A table that controls selection of ETS Configuration TLVs to be transmitted on individual ports. | ||||
| RlldpXdot1dcbxConfigETSConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined ETS Configuration TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpXdot1dcbxConfigETSConfigurationTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpXdot1dcbxConfigETSConfigurationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Configuration TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpXdot1dcbxConfigETSRecommendationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2 | NA | ||
table · not-accessible · current A table that controls selection of ETS Recommendation TLVs to be transmitted on individual ports. | ||||
| RlldpXdot1dcbxConfigETSRecommendationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined ETS Recommendation TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpXdot1dcbxConfigETSRecommendationTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.2.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpXdot1dcbxConfigETSRecommendationTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined ETS Recommendation TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpXdot1dcbxConfigPFCTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3 | NA | ||
table · not-accessible · current A table that controls selection of Priority-based Flow Control Configuration TLVs to be transmitted on individual ports. | ||||
| RlldpXdot1dcbxConfigPFCEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Priority-based Flow Control Configuration TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpXdot1dcbxConfigPFCTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.3.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpXdot1dcbxConfigPFCTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Priority-based Flow Control Configuration TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpXdot1dcbxConfigApplicationPriorityTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4 | NA | ||
table · not-accessible · current A table that controls selection of Priority-based Flow Control Configuration TLVs to be transmitted on individual ports. | ||||
| RlldpXdot1dcbxConfigApplicationPriorityEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Application Priority TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpXdot1dcbxConfigApplicationPriorityTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.4.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpXdot1dcbxConfigApplicationPriorityTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application Priority TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| TlldpXdot1dcbxConfigApplicationVlanTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5 | NA | ||
table · not-accessible · current A table that controls selection of Application VLAN TLVs to be transmitted on individual ports. | ||||
| RlldpXdot1dcbxConfigApplicationVlanEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5.1 | NA | ||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Application VLAN TLV on LLDP transmission-capable ports. This configuration object augments the lldpV2PortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpV2PortConfigEntry entry. Each active lldpConfigEntry is restored from non-volatile storage (along with the corresponding lldpV2PortConfigEntry) after a re-initialization of the management system.
| ||||
| ClldpXdot1dcbxConfigApplicationVlanTxEnable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.1.5.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current The lldpXdot1dcbxConfigApplicationVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined Application VLAN TLV transmission is allowed on a given LLDP transmission-capable port. The value of this object is restored from non-volatile storage after a re-initialization of the management system. | ||||
| NlldpXdot1dcbxLocalData | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2 | |||
| NlldpXdot1dcbxLocETSConfiguration | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1 | |||
| TlldpXdot1dcbxLocETSBasicConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1 | NA | ||
table · not-accessible · current This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent | ||||
| RlldpXdot1dcbxLocETSBasicConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1 | NA | ||
row · not-accessible · current Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension.
| ||||
| ClldpXdot1dcbxLocETSConCreditBasedShaperSupport | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the credit-based shaper Traffic Selection Algorithm is supported on the local system. | ||||
| ClldpXdot1dcbxLocETSConTrafficClassesSupported | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.2 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes supported. | ||||
| ClldpXdot1dcbxLocETSConWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the local system is willing to accept the ETS configuration recommended by the remote system. | ||||
| TlldpXdot1dcbxLocETSConPriorityAssignmentTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2 | NA | ||
table · not-accessible · current This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned. | ||||
| RlldpXdot1dcbxLocETSConPriorityAssignmentEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1 | NA | ||
row · not-accessible · current Indicates a priority to traffic class assignment. | ||||
| ClldpXdot1dcbxLocETSConPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.1 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Indicates the priority that is assigned to a traffic class. | ||||
| ClldpXdot1dcbxLocETSConPriTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | RO | |
column · LldpXdot1dcbxTrafficClassValue · read-only · current Indicates the traffic class to which this priority is to be assigned. | ||||
| TlldpXdot1dcbxLocETSConTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | ||||
| RlldpXdot1dcbxLocETSConTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1 | NA | ||
row · not-accessible · current Indicates a traffic class to Bandwidth assignment. | ||||
| ClldpXdot1dcbxLocETSConTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class to which this bandwidth applies | ||||
| ClldpXdot1dcbxLocETSConTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.3.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | RO | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-only · current Indicates the bandwidth assigned to this traffic class. | ||||
| TlldpXdot1dcbxLocETSConTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | ||||
| RlldpXdot1dcbxLocETSConTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1 | NA | ||
row · not-accessible · current Indicates a traffic class to traffic selection algorithm assignment. | ||||
| ClldpXdot1dcbxLocETSConTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class that is assigned to a traffic selection algorithm. | ||||
| ClldpXdot1dcbxLocETSConTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.1.4.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | RO | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-only · current Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. | ||||
| NlldpXdot1dcbxLocETSReco | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2 | |||
| TlldpXdot1dcbxLocETSRecoTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | ||||
| RlldpXdot1dcbxLocETSRecoTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1 | NA | ||
row · not-accessible · current Indicates a traffic class to Bandwidth assignment. | ||||
| ClldpXdot1dcbxLocETSRecoTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class to which this bandwidth applies | ||||
| ClldpXdot1dcbxLocETSRecoTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.1.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | RO | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-only · current Indicates the bandwidth assigned to this traffic class. | ||||
| TlldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2 | NA | ||
table · not-accessible · current This table contains one row per priority. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | ||||
| RlldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1 | NA | ||
row · not-accessible · current Indicates a priority to traffic selection algorithm assignment. | ||||
| ClldpXdot1dcbxLocETSRecoTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class that is assigned to a traffic selection algorithm. | ||||
| ClldpXdot1dcbxLocETSRecoTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.2.2.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | RO | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-only · current Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. | ||||
| NlldpXdot1dcbxLocPFC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3 | |||
| TlldpXdot1dcbxLocPFCBasicTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1 | NA | ||
table · not-accessible · current This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent | ||||
| RlldpXdot1dcbxLocPFCBasicEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1 | NA | ||
row · not-accessible · current Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension.
| ||||
| ClldpXdot1dcbxLocPFCWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the local system is willing to accept the PFC configuration of the remote system. | ||||
| ClldpXdot1dcbxLocPFCMBC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the local system is capable of bypassing MACsec processing when MACsec is disabled. | ||||
| ClldpXdot1dcbxLocPFCCap | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.1.1.3 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. | ||||
| TlldpXdot1dcbxLocPFCEnableTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2 | NA | ||
table · not-accessible · current This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority. | ||||
| RlldpXdot1dcbxLocPFCEnableEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1 | NA | ||
row · not-accessible · current Each entry indicates if PFC is enabled on the correponding priority | ||||
| ClldpXdot1dcbxLocPFCEnablePriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.1 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Prioity for which PFC is enabled / disabled | ||||
| ClldpXdot1dcbxLocPFCEnableEnabled | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.3.2.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if PFC is enabled on the corresponding priority | ||||
| TlldpXdot1dcbxLocApplicationPriorityAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4 | NA | ||
table · not-accessible · current Table containing entries indicating the priorty to be used for a given application | ||||
| RlldpXdot1dcbxLocApplicationPriorityAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1 | NA | ||
row · not-accessible · current Entry that indicates the priority to be used for a given application. | ||||
| ClldpXdot1dcbxLocApplicationPriorityAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.1 | LldpXdot1dcbxAppSelector | NA | |
column · LldpXdot1dcbxAppSelector · not-accessible · current Indicates the contents of the protocol object (lldpXdot1dcbxLocApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) | ||||
| ClldpXdot1dcbxLocApplicationPriorityAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.2 | LldpXdot1dcbxAppProtocol | NA | |
column · LldpXdot1dcbxAppProtocol · not-accessible · current The protocol indicator of the type indicated by lldpXdot1dcbxLocApplicationPriorityAESelector. | ||||
| ClldpXdot1dcbxLocApplicationPriorityAEPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.4.1.3 | IEEE8021PriorityValue | RO | |
column · IEEE8021PriorityValue · read-only · current The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxLocApplicationPriorityAESelector and lldpXdot1dcbxLocApplicationPriorityAEProtocol | ||||
| TlldpXdot1dcbxLocApplicationVlanAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5 | NA | ||
table · not-accessible · current Table containing entries indicating the VLAN to be used for a given application | ||||
| RlldpXdot1dcbxLocApplicationVlanAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1 | NA | ||
row · not-accessible · current Entry that indicates the VLAN to be used for a given application. | ||||
| ClldpXdot1dcbxLocApplicationVlanAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.1 | LldpXdot1dcbxAppSelector | NA | |
column · LldpXdot1dcbxAppSelector · not-accessible · current Indicates the contents of the protocol object (lldpXdot1dcbxLocApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) | ||||
| ClldpXdot1dcbxLocApplicationVlanAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.2 | LldpXdot1dcbxAppProtocol | NA | |
column · LldpXdot1dcbxAppProtocol · not-accessible · current The protocol indicator of the type indicated by lldpXdot1dcbxLocApplicationVlanAESelector. | ||||
| ClldpXdot1dcbxLocApplicationVlanAEVlanId | 1.3.111.2.802.1.1.13.1.5.32962.5.1.2.5.1.3 | VlanId | RO | |
column · VlanId · read-only · current The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxLocApplicationVlanAESelector and lldpXdot1dcbxLocApplicationVlanAEProtocol | ||||
| NlldpXdot1dcbxRemoteData | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3 | |||
| NlldpXdot1dcbxRemETSConfiguration | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1 | |||
| TlldpXdot1dcbxRemETSBasicConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1 | NA | ||
table · not-accessible · current This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent | ||||
| RlldpXdot1dcbxRemETSBasicConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1 | NA | ||
row · not-accessible · current Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension. | ||||
| ClldpXdot1dcbxRemETSConCreditBasedShaperSupport | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the credit-based shaper Traffic Selection algorithm is supported on the remote system. | ||||
| ClldpXdot1dcbxRemETSConTrafficClassesSupported | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.2 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes supported. | ||||
| ClldpXdot1dcbxRemETSConWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the remote system is willing to accept the ETS configuration recommended by the remote system. | ||||
| TlldpXdot1dcbxRemETSConPriorityAssignmentTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2 | NA | ||
table · not-accessible · current This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned. | ||||
| RlldpXdot1dcbxRemETSConPriorityAssignmentEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1 | NA | ||
row · not-accessible · current Indicates a priority to traffic class assignment. | ||||
| ClldpXdot1dcbxRemETSConPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.1 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Indicates the priority that is assigned to a traffic class. | ||||
| ClldpXdot1dcbxRemETSConPriTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | RO | |
column · LldpXdot1dcbxTrafficClassValue · read-only · current Indicates the traffic class to which this priority is to be assigned. | ||||
| TlldpXdot1dcbxRemETSConTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | ||||
| RlldpXdot1dcbxRemETSConTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1 | NA | ||
row · not-accessible · current Indicates a traffic class to Bandwidth assignment. | ||||
| ClldpXdot1dcbxRemETSConTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class to which this bandwidth applies | ||||
| ClldpXdot1dcbxRemETSConTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.3.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | RO | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-only · current Indicates the bandwidth assigned to this traffic class. | ||||
| TlldpXdot1dcbxRemETSConTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | ||||
| RlldpXdot1dcbxRemETSConTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1 | NA | ||
row · not-accessible · current Indicates a traffic class to traffic selection algorithm assignment. | ||||
| ClldpXdot1dcbxRemETSConTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class that is assigned to a traffic selection algorithm. | ||||
| ClldpXdot1dcbxRemETSConTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.1.4.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | RO | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-only · current Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. | ||||
| NlldpXdot1dcbxRemETSReco | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2 | |||
| TlldpXdot1dcbxRemETSRecoTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | ||||
| RlldpXdot1dcbxRemETSRecoTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1 | NA | ||
row · not-accessible · current Indicates a traffic class to Bandwidth assignment. | ||||
| ClldpXdot1dcbxRemETSRecoTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class to which this bandwidth applies | ||||
| ClldpXdot1dcbxRemETSRecoTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.1.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | RO | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-only · current Indicates the bandwidth assigned to this traffic class. | ||||
| TlldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the priority. | ||||
| RlldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1 | NA | ||
row · not-accessible · current Indicates a priority to traffic selection algorithm assignment. | ||||
| ClldpXdot1dcbxRemETSRecoTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class that is assigned to a traffic selection algorithm. | ||||
| ClldpXdot1dcbxRemETSRecoTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.2.2.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | RO | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-only · current Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. | ||||
| NlldpXdot1dcbxRemPFC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3 | |||
| TlldpXdot1dcbxRemPFCBasicTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1 | NA | ||
table · not-accessible · current This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent | ||||
| RlldpXdot1dcbxRemPFCBasicEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1 | NA | ||
row · not-accessible · current Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension. | ||||
| ClldpXdot1dcbxRemPFCWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the remote system is willing to accept the PFC configuration of the local system. | ||||
| ClldpXdot1dcbxRemPFCMBC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the remote system is capable of bypassing MACsec processing when MACsec is disabled. | ||||
| ClldpXdot1dcbxRemPFCCap | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.1.1.3 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes on the remote device that may simultaneously have PFC enabled. | ||||
| TlldpXdot1dcbxRemPFCEnableTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2 | NA | ||
table · not-accessible · current This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority. | ||||
| RlldpXdot1dcbxRemPFCEnableEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1 | NA | ||
row · not-accessible · current Each entry indicates if PFC is enabled on the correponding priority | ||||
| ClldpXdot1dcbxRemPFCEnablePriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.1 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Prioity for which PFC is enabled / disabled | ||||
| ClldpXdot1dcbxRemPFCEnableEnabled | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.3.2.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if PFC is enabled on the corresponding priority | ||||
| TlldpXdot1dcbxRemApplicationPriorityAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4 | NA | ||
table · not-accessible · current Table containing entries indicating the priorty to be used for a given application | ||||
| RlldpXdot1dcbxRemApplicationPriorityAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1 | NA | ||
row · not-accessible · current Entry that indicates the priority to be used for a given application. | ||||
| ClldpXdot1dcbxRemApplicationPriorityAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.1 | LldpXdot1dcbxAppSelector | NA | |
column · LldpXdot1dcbxAppSelector · not-accessible · current Indicates the contents of the protocol object (lldpXdot1dcbxRemApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) | ||||
| ClldpXdot1dcbxRemApplicationPriorityAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.2 | LldpXdot1dcbxAppProtocol | NA | |
column · LldpXdot1dcbxAppProtocol · not-accessible · current The protocol indicator of the type indicated by lldpXdot1dcbxRemApplicationPriorityAESelector. | ||||
| ClldpXdot1dcbxRemApplicationPriorityAEPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.4.1.3 | IEEE8021PriorityValue | RO | |
column · IEEE8021PriorityValue · read-only · current The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxRemApplicationPriorityAESelector and lldpXdot1dcbxRemApplicationPriorityAEProtocol | ||||
| TlldpXdot1dcbxRemApplicationVlanAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5 | NA | ||
table · not-accessible · current Table containing entries indicating the VLAN to be used for a given application | ||||
| RlldpXdot1dcbxRemApplicationVlanAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1 | NA | ||
row · not-accessible · current Entry that indicates the VLAN to be used for a given application. | ||||
| ClldpXdot1dcbxRemApplicationVlanAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.1 | LldpXdot1dcbxAppSelector | NA | |
column · LldpXdot1dcbxAppSelector · not-accessible · current Indicates the contents of the protocol object (lldpXdot1dcbxRemApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) | ||||
| ClldpXdot1dcbxRemApplicationVlanAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.2 | LldpXdot1dcbxAppProtocol | NA | |
column · LldpXdot1dcbxAppProtocol · not-accessible · current The protocol indicator of the type indicated by lldpXdot1dcbxRemApplicationVlanAESelector. | ||||
| ClldpXdot1dcbxRemApplicationVlanAEVlanId | 1.3.111.2.802.1.1.13.1.5.32962.5.1.3.5.1.3 | VlanId | RO | |
column · VlanId · read-only · current The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxRemApplicationVlanAESelector and lldpXdot1dcbxRemApplicationVlanAEProtocol | ||||
| NlldpXdot1dcbxAdminData | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4 | |||
| NlldpXdot1dcbxAdminETSConfiguration | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1 | |||
| TlldpXdot1dcbxAdminETSBasicConfigurationTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1 | NA | ||
table · not-accessible · current This table contains one row per port for the IEEE 802.1 organizationally defined LLDP ETS Configuration TLV on the local system known to this agent | ||||
| RlldpXdot1dcbxAdminETSBasicConfigurationEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1 | NA | ||
row · not-accessible · current Information about the IEEE 802.1 organizational defined ETS Configuration TLV LLDP extension.
| ||||
| ClldpXdot1dcbxAdminETSConCreditBasedShaperSupport | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.1 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates support for the credit-based shaper Traffic Selection Algorithm. | ||||
| ClldpXdot1dcbxAdminETSConTrafficClassesSupported | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.2 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes supported. | ||||
| ClldpXdot1dcbxAdminETSConWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.1.1.3 | TruthValue | RW | |
column · TruthValue · read-write · current Indicates if the local system is willing to accept the ETS configuration recommended by the remote system. | ||||
| TlldpXdot1dcbxAdminETSConPriorityAssignmentTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2 | NA | ||
table · not-accessible · current This table contains one row per priority. The entry in each row indicates the traffic class to which the priority is assigned. | ||||
| RlldpXdot1dcbxAdminETSConPriorityAssignmentEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1 | NA | ||
row · not-accessible · current Indicates a priority to traffic class assignment. | ||||
| ClldpXdot1dcbxAdminETSConPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.1 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Indicates the priority that is assigned to a traffic class. | ||||
| ClldpXdot1dcbxAdminETSConPriTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.2.1.2 | LldpXdot1dcbxTrafficClassValue | RW | |
column · LldpXdot1dcbxTrafficClassValue · read-write · current Indicates the traffic class to which this priority is to be assigned. | ||||
| TlldpXdot1dcbxAdminETSConTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | ||||
| RlldpXdot1dcbxAdminETSConTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1 | NA | ||
row · not-accessible · current Indicates a traffic class to Bandwidth assignment. | ||||
| ClldpXdot1dcbxAdminETSConTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class to which this bandwidth applies | ||||
| ClldpXdot1dcbxAdminETSConTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.3.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | RW | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-write · current Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100. | ||||
| TlldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the priority. | ||||
| RlldpXdot1dcbxAdminETSConTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1 | NA | ||
row · not-accessible · current Indicates a traffic class to traffic selection algorithm assignment. | ||||
| ClldpXdot1dcbxAdminETSConTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class that is assigned to a traffic selection algorithm. | ||||
| ClldpXdot1dcbxAdminETSConTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.1.4.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | RW | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-write · current Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. | ||||
| NlldpXdot1dcbxAdminETSReco | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2 | |||
| TlldpXdot1dcbxAdminETSRecoTrafficClassBandwidthTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic class to which the bandwidth is assigned. | ||||
| RlldpXdot1dcbxAdminETSRecoTrafficClassBandwidthEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1 | NA | ||
row · not-accessible · current Indicates a traffic class to Bandwidth assignment. | ||||
| ClldpXdot1dcbxAdminETSRecoTrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class to which this bandwidth applies | ||||
| ClldpXdot1dcbxAdminETSRecoTrafficClassBandwidth | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.1.1.2 | LldpXdot1dcbxTrafficClassBandwidthValue | RW | |
column · LldpXdot1dcbxTrafficClassBandwidthValue · read-write · current Indicates the bandwidth assigned to this traffic class. The sum of the bandwidths assigned to a given port is required at all times to eqaul 100. An operation that attempts to change this table such that the bandwidth entires do not total 100 shall be rejected. An implication of this is that modification of this table requires that multiple set operations be included in a single SNMP PDU, commonly referred to as an MSET operation, to perform simultaneous set operations to keep the sum at 100. Any attempt to change a single entry in this table will result in the operation being rejected since entries in the table referring to the given port will no longer sum to 100. | ||||
| TlldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2 | NA | ||
table · not-accessible · current This table contains one row per traffic class. The entry in each row indicates the traffic selction algorithm to be used by the traffic class. | ||||
| RlldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithmEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1 | NA | ||
row · not-accessible · current Indicates a traffic class to traffic selection algorithm assignment. | ||||
| ClldpXdot1dcbxAdminETSRecoTSATrafficClass | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.1 | LldpXdot1dcbxTrafficClassValue | NA | |
column · LldpXdot1dcbxTrafficClassValue · not-accessible · current Indicates the traffic class that is assigned to a traffic selection algorithm. | ||||
| ClldpXdot1dcbxAdminETSRecoTrafficSelectionAlgorithm | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.2.2.1.2 | LldpXdot1dcbxTrafficSelectionAlgorithm | RW | |
column · LldpXdot1dcbxTrafficSelectionAlgorithm · read-write · current Indicates the Traffic Selection Algorithm to which this traffic class is to be assigned. | ||||
| NlldpXdot1dcbxAdminPFC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3 | |||
| TlldpXdot1dcbxAdminPFCBasicTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1 | NA | ||
table · not-accessible · current This table contains one row per port for the IEEE 802.1 organizationally defined LLDP PFC TLV on the local system known to this agent | ||||
| RlldpXdot1dcbxAdminPFCBasicEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1 | NA | ||
row · not-accessible · current Information about the IEEE 802.1 organizational defined PFC TLV LLDP extension.
| ||||
| ClldpXdot1dcbxAdminPFCWilling | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Indicates if the local system is willing to accept the PFC configuration of the remote system. | ||||
| ClldpXdot1dcbxAdminPFCMBC | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the local system is capable of bypassing MACsec processing when MACsec is disabled. | ||||
| ClldpXdot1dcbxAdminPFCCap | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.1.1.3 | LldpXdot1dcbxSupportedCapacity | RO | |
column · LldpXdot1dcbxSupportedCapacity · read-only · current Indicates the number of traffic classes on the local device that may simultaneously have PFC enabled. Note that this typically indicates a physical limitation of the device. However, some devices may allow this parameter to be administratively configured, in which case the MAX-ACCESS should be changed to read-write with and an appropriate DEFVAL added. | ||||
| TlldpXdot1dcbxAdminPFCEnableTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2 | NA | ||
table · not-accessible · current This table contains eight entries, one entry per priority, indicating if PFC is enabled on the corresponding priority. | ||||
| RlldpXdot1dcbxAdminPFCEnableEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1 | NA | ||
row · not-accessible · current Each entry indicates if PFC is enabled on the correponding priority | ||||
| ClldpXdot1dcbxAdminPFCEnablePriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.1 | IEEE8021PriorityValue | NA | |
column · IEEE8021PriorityValue · not-accessible · current Prioity for which PFC is enabled / disabled | ||||
| ClldpXdot1dcbxAdminPFCEnableEnabled | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.3.2.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current Indicates if PFC is enabled on the corresponding priority | ||||
| TlldpXdot1dcbxAdminApplicationPriorityAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4 | NA | ||
table · not-accessible · current Table containing entries indicating the priorty to be used for a given application | ||||
| RlldpXdot1dcbxAdminApplicationPriorityAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1 | NA | ||
row · not-accessible · current Entry that indicates the priority to be used for a given application. | ||||
| ClldpXdot1dcbxAdminApplicationPriorityAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.1 | LldpXdot1dcbxAppSelector | NA | |
column · LldpXdot1dcbxAppSelector · not-accessible · current Indicates the contents of the protocol object (lldpXdot1dcbxAdminApplicationPriorityAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) | ||||
| ClldpXdot1dcbxAdminApplicationPriorityAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.2 | LldpXdot1dcbxAppProtocol | NA | |
column · LldpXdot1dcbxAppProtocol · not-accessible · current The protocol indicator of the type indicated by lldpXdot1dcbxAdminApplicationPriorityAESelector. | ||||
| ClldpXdot1dcbxAdminApplicationPriorityAEPriority | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.4.1.3 | IEEE8021PriorityValue | RC | |
column · IEEE8021PriorityValue · read-create · current The priority code point that should be used in frames transporting the protocol indicated by lldpXdot1dcbxAdminApplicationPriorityAESelector and lldpXdot1dcbxAdminApplicationPriorityAEProtocol | ||||
| TlldpXdot1dcbxAdminApplicationVlanAppTable | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5 | NA | ||
table · not-accessible · current Table containing entries indicating the VLAN to be used for a given application | ||||
| RlldpXdot1dcbxAdminApplicationVlanAppEntry | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1 | NA | ||
row · not-accessible · current Entry that indicates the VLAN to be used for a given application. | ||||
| ClldpXdot1dcbxAdminApplicationVlanAESelector | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.1 | LldpXdot1dcbxAppSelector | NA | |
column · LldpXdot1dcbxAppSelector · not-accessible · current Indicates the contents of the protocol object (lldpXdot1dcbxAdminApplicationVlanAEProtocol) 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.) | ||||
| ClldpXdot1dcbxAdminApplicationVlanAEProtocol | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.2 | LldpXdot1dcbxAppProtocol | NA | |
column · LldpXdot1dcbxAppProtocol · not-accessible · current The protocol indicator of the type indicated by lldpXdot1dcbxAdminApplicationVlanAESelector. | ||||
| ClldpXdot1dcbxAdminApplicationVlanAEVlanId | 1.3.111.2.802.1.1.13.1.5.32962.5.1.4.5.1.3 | VlanId | RC | |
column · VlanId · read-create · current The VLAN Identifier that should be used in frames transporting the protocol indicated by lldpXdot1dcbxAdminApplicationVlanAESelector and lldpXdot1dcbxAdminApplicationVlanAEProtocol | ||||
| NlldpXdot1dcbxConformance | 1.3.111.2.802.1.1.13.1.5.32962.6 | |||
| NlldpXdot1dcbxCompliances | 1.3.111.2.802.1.1.13.1.5.32962.6.1 | |||
| MlldpXdot1dcbxCompliance | 1.3.111.2.802.1.1.13.1.5.32962.6.1.1 | |||
compliance · current A compliance statement for SNMP entities that implement the IEEE 802.1 organizationally defined DCBX LLDP extension MIB. This group is mandatory for agents which implement Enhanced Transmission Selection. | ||||
| NlldpXdot1dcbxGroups | 1.3.111.2.802.1.1.13.1.5.32962.6.2 | |||
| GlldpXdot1dcbxETSGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.1 | |||
group · current The collection of objects used for Enhanced Transmission Selection.
| ||||
| GlldpXdot1dcbxPFCGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.2 | |||
group · current The collection of objects used for Priority- base Flow Control.
| ||||
| GlldpXdot1dcbxApplicationPriorityGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.3 | |||
group · current The collection of objects used for Application priority. | ||||
| GlldpXdot1dcbxApplicationVlanGroup | 1.3.111.2.802.1.1.13.1.5.32962.6.2.4 | |||
group · current The collection of objects used for Application VLAN. | ||||
Textual conventions
LldpV2CnBitVectorBitspri0status(0)pri1status(1)pri2status(2)pri3status(3)pri4status(4)pri5status(5)pri6status(6)pri7status(7)This TC describes a bit vector used in the Congestion Notification objects. Each bit represents a Boolean status associated with a priority code point. A bit value of 0 represents FALSE, 1 represents TRUE. The bit 'pri0status(0)' indicates the status for priority 0 The bit 'pri1status(1)' indicates the status for priority 1 The bit 'pri2status(2)' indicates the status for priority 2 The bit 'pri3status(3)' indicates the status for priority 3 The bit 'pri4status(4)' indicates the status for priority 4 The bit 'pri5status(5)' indicates the status for priority 5 The bit 'pri6status(6)' indicates the status for priority 6 The bit 'pri7status(7)' indicates the status for priority 7
LldpV2XLinkAggStatusMapBitsaggCapable(0)aggEnabled(1)portTypeLS(2)portTypeMS(3)This TC describes the link aggregation status. The bit 'aggCapable(0)' indicates the link is capable of being aggregated if 1, not capable if 0. The bit 'aggEnabled(1)' indicates the link is currently in an aggregation if 1, not in an aggregation if 0. The bits 'portTypeLS(1)' and portTypeMS(2)' form the LS and MS bits of a Port Type value respectively: 00 = no port type specified 01 = transmitted from Aggregation Port 10 = transmitted from Aggregator 11 = transmitted from an Aggregator with a single Aggregation Port. The remaining bits are reserved for future standardization.LldpXdot1dcbxAppProtocolUnsigned32 (0..65535)Display hint:
dContains the application protocol indicator the type of which is specified by an object with the syntax of LldpXdot1dcbxAppSelector
LldpXdot1dcbxAppSelectorINTEGERasDSCPValue(5)asEthertype(1)asTCPPortNumber(2)asTCPUDPPortNumber(4)asUDPPortNumber(3)Indicates the contents of a protocol object 1: Ethertype 2: Well Known Port number over TCP, or SCTP 3: Well Known Port number over UDP, or DCCP 4: Well Known Port number over TCP, SCTP, UDP, and DCCP 5: Differentiated Services Code Point (DSCP) value. The 6 bit DSCP value is stored in the low order 6 bits of the protocol object. The higher order bits are set to zero. (See IETF RFC 2474 for the definition of the DSCP value.)
LldpXdot1dcbxSupportedCapacityUnsigned32 (1..8)Display hint:
dIndicates the supported capacity of a given feature, for example, the number of traffic classes supported. This TC is used for features that have a maximum capacity of eight and a minimum of one.
LldpXdot1dcbxTrafficClassBandwidthValueUnsigned32 (0..100)Display hint:
dIndicates the bandwidth in percent assigned to a traffic class.
LldpXdot1dcbxTrafficClassValueUnsigned32 (0..7)Display hint:
dIndicates a traffic class. Values 0-7 correspond to traffic classes.
LldpXdot1dcbxTrafficSelectionAlgorithmINTEGERtsaCreditBasedShaper(1)tsaEnhancedTransmission(2)tsaStrictPriority(0)tsaVendorSpecific(255)Indicates the Traffic Selection Algorithm 0: Strict Priority 1: Credit-based shaper 2: Enhanced transmission selection 3-254: Reserved for furture standardization 255: Vendor specific
Groups and compliance
- lldpV2Xdot1ConfigGroup
- lldpV2Xdot1LocSysGroup
- lldpV2Xdot1RemSysGroup
- lldpV2Xdot1RemSysV2Group
- lldpV2Xdot1RxCompliance
- lldpV2Xdot1RxComplianceV2
- lldpV2Xdot1TxCompliance
- lldpV2Xdot1TxRxCompliance
- lldpXdot1CnCompliance
- lldpXdot1CnGroup
- lldpXdot1dcbxApplicationPriorityGroup
- lldpXdot1dcbxApplicationVlanGroup
- lldpXdot1dcbxCompliance
- lldpXdot1dcbxETSGroup
- lldpXdot1dcbxPFCGroup
Used by
- ALCATEL-IND1-DCBX-MIB (nokia/aos7)