MIB Browser

INTEGRATED-SERVICES-MIB

Standards (IETF)
The MIB module to describe the Integrated Services
Protocol
Organization
IETF Integrated Services Working Group
Root OID
1.3.6.1.2.1.52
Last updated
Objects
46
Source
Show full MIB
snmptranslate -m INTEGRATED-SERVICES-MIB -Tp
snmpwalk -v2c -c <community> -m INTEGRATED-SERVICES-MIB <host> 1.3.6.1.2.1.52

Imports

IF-MIBInterfaceIndex, ifIndex
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TestAndIncr, TimeInterval, TruthValue

OID tree

NameOIDTypeAccessStatusExample
IintSrv1.3.6.1.2.1.52
NintSrvObjects1.3.6.1.2.1.52.1
TintSrvIfAttribTable1.3.6.1.2.1.52.1.1NA
RintSrvIfAttribEntry1.3.6.1.2.1.52.1.1.1NA
CintSrvIfAttribAllocatedBits1.3.6.1.2.1.52.1.1.1.1BitRateRO
CintSrvIfAttribMaxAllocatedBits1.3.6.1.2.1.52.1.1.1.2BitRateRC
CintSrvIfAttribAllocatedBuffer1.3.6.1.2.1.52.1.1.1.3BurstSizeRO
CintSrvIfAttribFlows1.3.6.1.2.1.52.1.1.1.4Gauge32RO
CintSrvIfAttribPropagationDelay1.3.6.1.2.1.52.1.1.1.5Integer32RC
CintSrvIfAttribStatus1.3.6.1.2.1.52.1.1.1.6RowStatusRC
TintSrvFlowTable1.3.6.1.2.1.52.1.2NA
RintSrvFlowEntry1.3.6.1.2.1.52.1.2.1NA
CintSrvFlowNumber1.3.6.1.2.1.52.1.2.1.1SessionNumberNA
CintSrvFlowType1.3.6.1.2.1.52.1.2.1.2SessionTypeRC
CintSrvFlowOwner1.3.6.1.2.1.52.1.2.1.3INTEGERRC
CintSrvFlowDestAddr1.3.6.1.2.1.52.1.2.1.4OCTET STRING (SIZE (4..16))RC
CintSrvFlowSenderAddr1.3.6.1.2.1.52.1.2.1.5OCTET STRING (SIZE (4..16))RC
CintSrvFlowDestAddrLength1.3.6.1.2.1.52.1.2.1.6INTEGER (0..128)RC
CintSrvFlowSenderAddrLength1.3.6.1.2.1.52.1.2.1.7INTEGER (0..128)RC
CintSrvFlowProtocol1.3.6.1.2.1.52.1.2.1.8ProtocolRC
CintSrvFlowDestPort1.3.6.1.2.1.52.1.2.1.9PortRC
CintSrvFlowPort1.3.6.1.2.1.52.1.2.1.10PortRC
CintSrvFlowFlowId1.3.6.1.2.1.52.1.2.1.11INTEGER (0..16777215)RO
CintSrvFlowInterface1.3.6.1.2.1.52.1.2.1.12InterfaceIndexRC
CintSrvFlowIfAddr1.3.6.1.2.1.52.1.2.1.13OCTET STRING (SIZE (4..16))RC
CintSrvFlowRate1.3.6.1.2.1.52.1.2.1.14BitRateRC
CintSrvFlowBurst1.3.6.1.2.1.52.1.2.1.15BurstSizeRC
CintSrvFlowWeight1.3.6.1.2.1.52.1.2.1.16Integer32RC
CintSrvFlowQueue1.3.6.1.2.1.52.1.2.1.17Integer32RC
CintSrvFlowMinTU1.3.6.1.2.1.52.1.2.1.18MessageSizeRC
CintSrvFlowMaxTU1.3.6.1.2.1.52.1.2.1.19MessageSizeRC
CintSrvFlowBestEffort1.3.6.1.2.1.52.1.2.1.20Counter32RO
CintSrvFlowPoliced1.3.6.1.2.1.52.1.2.1.21Counter32RO
CintSrvFlowDiscard1.3.6.1.2.1.52.1.2.1.22TruthValueRC
CintSrvFlowService1.3.6.1.2.1.52.1.2.1.23QosServiceRO
CintSrvFlowOrder1.3.6.1.2.1.52.1.2.1.24INTEGER (0..65535)RC
CintSrvFlowStatus1.3.6.1.2.1.52.1.2.1.25RowStatusRC
NintSrvGenObjects1.3.6.1.2.1.52.2
SintSrvFlowNewIndex1.3.6.1.2.1.52.2.1TestAndIncrRW0
NintSrvNotifications1.3.6.1.2.1.52.3
NintSrvConformance1.3.6.1.2.1.52.4
NintSrvGroups1.3.6.1.2.1.52.4.1
GintSrvIfAttribGroup1.3.6.1.2.1.52.4.1.1
GintSrvFlowsGroup1.3.6.1.2.1.52.4.1.2
NintSrvCompliances1.3.6.1.2.1.52.4.2
MintSrvCompliance1.3.6.1.2.1.52.4.2.1

Textual conventions

BitRate INTEGER (0..2147483647)

Display hint: d

The rate, in bits/second, that data  may  move
in  the context.  Applicable contexts minimally
include the speed of an  interface  or  virtual
circuit, the data rate of a (potentially aggre-
gated) data flow, or the data rate to be  allo-
cated for use by a flow.
BurstSize INTEGER (0..2147483647)

Display hint: d

The number of octets of IP Data, including  IP
Headers, that a stream may send without concern
for policing.
MessageSize INTEGER (0..2147483647)

Display hint: d

The size of a message in bytes. This  is  used
to  specify  the  minimum and maximum size of a
message along an integrated services route.
Port OCTET STRING (SIZE (2..4))
The value of the UDP or TCP Source or Destina-
tion  Port field, a virtual destination port or
generalized port identifier used with the IPSEC
Authentication Header or Encapsulating Security
Payload, or other session discriminator.  If it
is  not  used, the value should be of length 0.
This pair, when coupled with the  IP  Addresses
of the source and destination system and the IP
protocol  field,  uniquely  identifies  a  data
stream.
Protocol INTEGER (1..255)

Display hint: d

The value of the IP Protocol field  of  an  IP
Datagram  Header.  This identifies the protocol
layer above IP.  For example, the  value  6  is
used  for TCP and the value 17 is used for UDP.
The values of this field are defined in the As-
signed Numbers RFC.
QosService INTEGER

bestEffort(1) controlledLoad(5) guaranteedDelay(2)

The class of service in use by a flow.
SessionNumber INTEGER (0..2147483647)
The Session  Number  convention  is  used  for
numbers  identifying  sessions or saved PATH or
RESV information. It is a number in  the  range
returned  by  a TestAndIncr variable, having no
protocol meaning whatsoever but serving instead
as simple identifier.

The alternative was a very complex instance  or
instance object that became unwieldy.
SessionType INTEGER (1..255)
The value of the C-Type field of a Session ob-
ject,  as  defined  in  the RSVP specification.
This value  determines  the  lengths  of  octet
strings  and use of certain objects such as the
'port' variables. If the C-Type  calls  for  an
IP6  address, one would expect all source, des-
tination, and next/previous hop addresses to be
16  bytes long, and for the ports to be UDP/TCP
port numbers, for example.

Used by