MIB Browser

IEEE802171-CFM-MIB

Standards (IEEE)
Conectivity Fault Management module for managing IEEE 802.1ag
Organization
IEEE 802.1 Working Group
Root OID
1.0.8802.1.1.3
Last updated
Objects
159
Source
Show full MIB
snmptranslate -m IEEE802171-CFM-MIB -Tp
snmpwalk -v2c -c <community> -m IEEE802171-CFM-MIB <host> 1.0.8802.1.1.3

Imports

IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
IF-MIBInterfaceIndex
LLDP-MIBLldpChassisId, LldpChassisIdSubtype, LldpManAddress, LldpPortId, LldpPortIdSubtype
Q-BRIDGE-MIBVlanId, VlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, zeroDotZero
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue
TRANSPORT-ADDRESS-MIBTransportAddress, TransportDomain

OID tree

NameOIDTypeAccessStatus
Iieee8021cfmMIB1.0.8802.1.1.3
Ndot1agNotifications1.0.8802.1.1.3.0
!dot1agCfmFaultAlarm1.0.8802.1.1.3.0.1
Ndot1agMIBObjects1.0.8802.1.1.3.1
Ndot1agCfmStack1.0.8802.1.1.3.1.1
Tdot1agCfmStackTable1.0.8802.1.1.3.1.1.1NA
Rdot1agCfmStackEntry1.0.8802.1.1.3.1.1.1.1NA
Cdot1agCfmStackifIndex1.0.8802.1.1.3.1.1.1.1.1InterfaceIndexNA
Cdot1agCfmStackDirection1.0.8802.1.1.3.1.1.1.1.2Dot1agCfmMpDirectionNA
Cdot1agCfmStackMepId1.0.8802.1.1.3.1.1.1.1.3Dot1agCfmMepIdOrZeroRO
Cdot1agCfmStackMacAddress1.0.8802.1.1.3.1.1.1.1.4MacAddressRO
Ndot1agCfmDefaultMdLevel1.0.8802.1.1.3.1.2
Tdot1agCfmDefaultMdLevelTable1.0.8802.1.1.3.1.2.1NA
Rdot1agCfmDefaultMdLevelEntry1.0.8802.1.1.3.1.2.1.1NA
Cdot1agCfmDefaultMdLevelIndex1.0.8802.1.1.3.1.2.1.1.1Unsigned32 (1..4294967295)NA
Cdot1agCfmDefaultMdLevelVid1.0.8802.1.1.3.1.2.1.1.2VlanIdOrNoneRO
Cdot1agCfmDefaultMdLevelMhfCreation1.0.8802.1.1.3.1.2.1.1.3Dot1agCfmMhfCreationRW
Cdot1agCfmDefaultMdLevelLevel1.0.8802.1.1.3.1.2.1.1.4Dot1agCfmMaintenanceDomainLevelRW
Ndot1agCfmConfigErrorList1.0.8802.1.1.3.1.3
Tdot1agCfmConfigErrorListTable1.0.8802.1.1.3.1.3.1NA
Rdot1agCfmConfigErrorListEntry1.0.8802.1.1.3.1.3.1.1NA
Cdot1agCfmConfigErrorListVid1.0.8802.1.1.3.1.3.1.1.1VlanIdNA
Cdot1agCfmConfigErrorListIfIndex1.0.8802.1.1.3.1.3.1.1.2InterfaceIndexNA
Cdot1agCfmConfigErrorListErrorType1.0.8802.1.1.3.1.3.1.1.3Dot1agCfmConfigErrorsRO
Ndot1agCfmMd1.0.8802.1.1.3.1.4
Sdot1agCfmMdTableNextIndex1.0.8802.1.1.3.1.4.1Dot1afCfmIndexIntegerNextFreeRO
Tdot1agCfmMdTable1.0.8802.1.1.3.1.4.2NA
Rdot1agCfmMdEntry1.0.8802.1.1.3.1.4.2.1NA
Cdot1agCfmMdIndex1.0.8802.1.1.3.1.4.2.1.1Unsigned32 (1..4294967295)NA
Cdot1agCfmMdFormat1.0.8802.1.1.3.1.4.2.1.2Dot1agCfmMaintDomainNameTypeRC
Cdot1agCfmMdName1.0.8802.1.1.3.1.4.2.1.3Dot1agCfmMaintDomainNameRC
Cdot1agCfmMdLevel1.0.8802.1.1.3.1.4.2.1.4Dot1agCfmMaintenanceDomainLevelRC
Cdot1agCfmMdMhfCreation1.0.8802.1.1.3.1.4.2.1.5Dot1agCfmMhfCreationRC
Cdot1agCfmMdFaultAlarmDestDomain1.0.8802.1.1.3.1.4.2.1.6TransportDomainRC
Cdot1agCfmMdFaulAlarmDestAddress1.0.8802.1.1.3.1.4.2.1.7TransportAddressRC
Cdot1agCfmMdRowStatus1.0.8802.1.1.3.1.4.2.1.8RowStatusRC
Ndot1agCfmMa1.0.8802.1.1.3.1.5
Sdot1agCfmMaTableNextIndex1.0.8802.1.1.3.1.5.1Dot1afCfmIndexIntegerNextFreeRO
Tdot1agCfmMaTable1.0.8802.1.1.3.1.5.3NA
Rdot1agCfmMaEntry1.0.8802.1.1.3.1.5.3.1NA
Cdot1agCfmMaIndex1.0.8802.1.1.3.1.5.3.1.1Unsigned32 (1..4094 | 16777217..4294967295)NA
Cdot1agCfmMaFormat1.0.8802.1.1.3.1.5.3.1.2Dot1agCfmMaintAssocNameTypeRC
Cdot1agCfmMaName1.0.8802.1.1.3.1.5.3.1.3Dot1agCfmMaintAssocNameRC
Cdot1agCfmMaMhfCreation1.0.8802.1.1.3.1.5.3.1.4Dot1agCfmMhfCreationRC
Cdot1agCfmMaCcmInterval1.0.8802.1.1.3.1.5.3.1.5Dot1agCfmCcmIntervalRC
Cdot1agCfmMaFaultAlarmDestDomain1.0.8802.1.1.3.1.5.3.1.6TransportDomainRC
Cdot1agCfmMaFaulAlarmDestAddress1.0.8802.1.1.3.1.5.3.1.7TransportAddressRC
Cdot1agCfmMaMoreThanOneVid1.0.8802.1.1.3.1.5.3.1.8TruthValueRC
Cdot1agCfmMaRowStatus1.0.8802.1.1.3.1.5.3.1.9RowStatusRC
Tdot1agCfmMaVlanTable1.0.8802.1.1.3.1.5.4NA
Rdot1agCfmMaVlanEntry1.0.8802.1.1.3.1.5.4.1NA
Cdot1agCfmMaVlanVid1.0.8802.1.1.3.1.5.4.1.1VlanIdNA
Cdot1agCfmMaVlanRowStatus1.0.8802.1.1.3.1.5.4.1.2RowStatusRC
Tdot1agCfmMaMepListTable1.0.8802.1.1.3.1.5.8NA
Rdot1agCfmMaMepListEntry1.0.8802.1.1.3.1.5.8.1NA
Cdot1agCfmMaMepListIdentifier1.0.8802.1.1.3.1.5.8.1.1Dot1agCfmMepIdNA
Cdot1agCfmMaMepListRowStatus1.0.8802.1.1.3.1.5.8.1.2RowStatusRC
Ndot1agCfmMep1.0.8802.1.1.3.1.6
Tdot1agCfmMepTable1.0.8802.1.1.3.1.6.1NA
Rdot1agCfmMepEntry1.0.8802.1.1.3.1.6.1.1NA
Cdot1agCfmMepIdentifier1.0.8802.1.1.3.1.6.1.1.1Dot1agCfmMepIdNA
Cdot1agCfmMepIfIndex1.0.8802.1.1.3.1.6.1.1.2InterfaceIndexRC
Cdot1agCfmMepDirection1.0.8802.1.1.3.1.6.1.1.3Dot1agCfmMpDirectionRC
Cdot1agCfmMepPrimaryVid1.0.8802.1.1.3.1.6.1.1.4Unsigned32 (0..16777215)RC
Cdot1agCfmMepActive1.0.8802.1.1.3.1.6.1.1.5TruthValueRC
Cdot1agCfmMepFngState1.0.8802.1.1.3.1.6.1.1.6Dot1agCfmFngStateRO
Cdot1agCfmMepCciEnabled1.0.8802.1.1.3.1.6.1.1.7TruthValueRC
Cdot1agCfmMepCcmLtmPriority1.0.8802.1.1.3.1.6.1.1.8Unsigned32 (0..7)RC
Cdot1agCfmMepMacAddress1.0.8802.1.1.3.1.6.1.1.9MacAddressRO
Cdot1agCfmMepFaultAlarmDestDomain1.0.8802.1.1.3.1.6.1.1.10TransportDomainRC
Cdot1agCfmMepFaulAlarmDestAddress1.0.8802.1.1.3.1.6.1.1.11TransportAddressRC
Cdot1agCfmMepLowPrDef1.0.8802.1.1.3.1.6.1.1.12Dot1agCfmLowestAlarmPriRC
Cdot1agCfmMepFngAlarmTime1.0.8802.1.1.3.1.6.1.1.13TimeInterval (250..1000)RC
Cdot1agCfmMepFngResetTime1.0.8802.1.1.3.1.6.1.1.14TimeInterval (250..1000)RC
Cdot1agCfmMepHighestPrDefect1.0.8802.1.1.3.1.6.1.1.15Dot1agCfmHighestDefectPriRO
Cdot1agCfmMepSomeRdiDefect1.0.8802.1.1.3.1.6.1.1.16TruthValueRO
Cdot1agCfmMepErrMacStatus1.0.8802.1.1.3.1.6.1.1.17TruthValueRO
Cdot1agCfmMepSomeRMepCcmDefect1.0.8802.1.1.3.1.6.1.1.18TruthValueRO
Cdot1agCfmMepErrorCcmDefect1.0.8802.1.1.3.1.6.1.1.19TruthValueRO
Cdot1agCfmMepXconCcmDefect1.0.8802.1.1.3.1.6.1.1.20TruthValueRO
Cdot1agCfmMepErrorCcmLastFailure1.0.8802.1.1.3.1.6.1.1.21OCTET STRING (SIZE (1..1522))RO
Cdot1agCfmMepXconCcmLastFailure1.0.8802.1.1.3.1.6.1.1.22OCTET STRING (SIZE (1..1522))RO
Cdot1agCfmMepRCcmSequenceErrors1.0.8802.1.1.3.1.6.1.1.23Counter32RO
Cdot1agCfmMepCciSentCcms1.0.8802.1.1.3.1.6.1.1.24Counter32RO
Cdot1agCfmMepNextLbmTransId1.0.8802.1.1.3.1.6.1.1.25Unsigned32RO
Cdot1agCfmMepLbrIn1.0.8802.1.1.3.1.6.1.1.26Counter32RO
Cdot1agCfmMepLbrInOutOfOrder1.0.8802.1.1.3.1.6.1.1.27Counter32RO
Cdot1agCfmMepLbrBadMsdu1.0.8802.1.1.3.1.6.1.1.28Counter32RO
Cdot1agCfmMepLtmNextSeqNumber1.0.8802.1.1.3.1.6.1.1.29Unsigned32RO
Cdot1agCfmMepUnexpLtrIn1.0.8802.1.1.3.1.6.1.1.30Counter32RO
Cdot1agCfmMepLbrOut1.0.8802.1.1.3.1.6.1.1.31Counter32RO
Cdot1agCfmMepTransmitLbmStatus1.0.8802.1.1.3.1.6.1.1.32TruthValueRW
Cdot1agCfmMepTransmitLbmDestMacAddress1.0.8802.1.1.3.1.6.1.1.33MacAddressRC
Cdot1agCfmMepTransmitLbmDestMepId1.0.8802.1.1.3.1.6.1.1.34Dot1agCfmMepIdOrZeroRC
Cdot1agCfmMepTransmitLbmDestIsMepId1.0.8802.1.1.3.1.6.1.1.35TruthValueRC
Cdot1agCfmMepTransmitLbmMessages1.0.8802.1.1.3.1.6.1.1.36Integer32 (1..1024)RC
Cdot1agCfmMepTransmitLbmDataTlv1.0.8802.1.1.3.1.6.1.1.37OCTET STRING (SIZE (0..1500))RC
Cdot1agCfmMepTransmitLbmVlanPriority1.0.8802.1.1.3.1.6.1.1.38Integer32 (0..7)RC
Cdot1agCfmMepTransmitLbmVlanDropEnable1.0.8802.1.1.3.1.6.1.1.39TruthValueRC
Cdot1agCfmMepTransmitLbmResultOK1.0.8802.1.1.3.1.6.1.1.40TruthValueRO
Cdot1agCfmMepTransmitLbmSeqNumber1.0.8802.1.1.3.1.6.1.1.41Unsigned32RO
Cdot1agCfmMepTransmitLtmStatus1.0.8802.1.1.3.1.6.1.1.42TruthValueRW
Cdot1agCfmMepTransmitLtmFlags1.0.8802.1.1.3.1.6.1.1.43BitsRC
Cdot1agCfmMepTransmitLtmTargetMacAddress1.0.8802.1.1.3.1.6.1.1.44MacAddressRC
Cdot1agCfmMepTransmitLtmTargetMepId1.0.8802.1.1.3.1.6.1.1.45Dot1agCfmMepIdOrZeroRC
Cdot1agCfmMepTransmitLtmTargetIsMepId1.0.8802.1.1.3.1.6.1.1.46TruthValueRC
Cdot1agCfmMepTransmitLtmTtl1.0.8802.1.1.3.1.6.1.1.47Unsigned32 (0..255)RC
Cdot1agCfmMepTransmitLtmResult1.0.8802.1.1.3.1.6.1.1.48TruthValueRO
Cdot1agCfmMepTransmitLtmSeqNumber1.0.8802.1.1.3.1.6.1.1.49Unsigned32RO
Cdot1agCfmMepTransmitLtmEgressIdentifier1.0.8802.1.1.3.1.6.1.1.50OCTET STRING (SIZE (8))RC
Cdot1agCfmMepRowStatus1.0.8802.1.1.3.1.6.1.1.51RowStatusRC
Tdot1agCfmLtrTable1.0.8802.1.1.3.1.6.2NA
Rdot1agCfmLtrEntry1.0.8802.1.1.3.1.6.2.1NA
Cdot1agCfmLtrSeqNumber1.0.8802.1.1.3.1.6.2.1.1Unsigned32 (0..4294967295)NA
Cdot1agCfmLtrReceiveOrder1.0.8802.1.1.3.1.6.2.1.2Unsigned32 (1..4294967295)NA
Cdot1agCfmLtrTtl1.0.8802.1.1.3.1.6.2.1.3Unsigned32 (0..255)RO
Cdot1agCfmLtrForwarded1.0.8802.1.1.3.1.6.2.1.4TruthValueRO
Cdot1agCfmLtrTerminalMep1.0.8802.1.1.3.1.6.2.1.5TruthValueRO
Cdot1agCfmLtrLastEgressIdentifier1.0.8802.1.1.3.1.6.2.1.6OCTET STRING (SIZE (8))RO
Cdot1agCfmLtrNextEgressIdentifier1.0.8802.1.1.3.1.6.2.1.7OCTET STRING (SIZE (8))RO
Cdot1agCfmLtrRelay1.0.8802.1.1.3.1.6.2.1.8Dot1agCfmRelayActionFieldValueRO
Cdot1agCfmLtrChassisIdSubtype1.0.8802.1.1.3.1.6.2.1.9LldpChassisIdSubtypeRO
Cdot1agCfmLtrChassisId1.0.8802.1.1.3.1.6.2.1.10LldpChassisIdRO
Cdot1agCfmLtrManAddressType1.0.8802.1.1.3.1.6.2.1.11AddressFamilyNumbersRO
Cdot1agCfmLtrManAddress1.0.8802.1.1.3.1.6.2.1.12LldpManAddressRO
Cdot1agCfmLtrIngress1.0.8802.1.1.3.1.6.2.1.13Dot1agCfmIngressActionFieldValueRO
Cdot1agCfmLtrIngressMac1.0.8802.1.1.3.1.6.2.1.14MacAddressRO
Cdot1agCfmLtrIngressPortIdSubtype1.0.8802.1.1.3.1.6.2.1.15LldpPortIdSubtypeRO
Cdot1agCfmLtrIngressPortId1.0.8802.1.1.3.1.6.2.1.16LldpPortIdRO
Cdot1agCfmLtrEgress1.0.8802.1.1.3.1.6.2.1.17Dot1agCfmEgressActionFieldValueRO
Cdot1agCfmLtrEgressMac1.0.8802.1.1.3.1.6.2.1.18MacAddressRO
Cdot1agCfmLtrEgressPortIdSubtype1.0.8802.1.1.3.1.6.2.1.19LldpPortIdSubtypeRO
Cdot1agCfmLtrEgressPortId1.0.8802.1.1.3.1.6.2.1.20LldpPortIdRO
Cdot1agCfmLtrOrganizationSpecificTlv1.0.8802.1.1.3.1.6.2.1.21OCTET STRING (SIZE (0 | 4..1500))RO
Tdot1agCfmMepDbTable1.0.8802.1.1.3.1.6.3NA
Rdot1agCfmMepDbEntry1.0.8802.1.1.3.1.6.3.1NA
Cdot1agCfmMepDbRMepIdentifier1.0.8802.1.1.3.1.6.3.1.1Dot1agCfmMepIdNA
Cdot1agCfmMepDbRMepState1.0.8802.1.1.3.1.6.3.1.2Dot1agCfmRemoteMepStateRO
Cdot1agCfmMepDbRMepFailedOkTime1.0.8802.1.1.3.1.6.3.1.3TimeStampRO
Cdot1agCfmMepDbMacAddress1.0.8802.1.1.3.1.6.3.1.4MacAddressRO
Cdot1agCfmMepDbRdi1.0.8802.1.1.3.1.6.3.1.5TruthValueRO
Cdot1agCfmMepDbPortStatusTlv1.0.8802.1.1.3.1.6.3.1.6Dot1agCfmPortStatusRO
Cdot1agCfmMepDbInterfaceStatusTlv1.0.8802.1.1.3.1.6.3.1.7Dot1agCfmInterfaceStatusRO
Cdot1agCfmMepDbChassisIdSubtype1.0.8802.1.1.3.1.6.3.1.8LldpChassisIdSubtypeRO
Cdot1agCfmMepDbChassisId1.0.8802.1.1.3.1.6.3.1.9LldpChassisIdRO
Cdot1agCfmMepDbManAddressType1.0.8802.1.1.3.1.6.3.1.10AddressFamilyNumbersRO
Cdot1agCfmMepDbManAddress1.0.8802.1.1.3.1.6.3.1.11LldpManAddressRO
Ndot1agCfmConformance1.0.8802.1.1.3.2
Ndot1agCfmCompliances1.0.8802.1.1.3.2.1
Mdot1agCfmCompliance1.0.8802.1.1.3.2.1.1
Ndot1agCfmGroups1.0.8802.1.1.3.2.2
Gdot1agCfmStackGroup1.0.8802.1.1.3.2.2.1
Gdot1agCfmDefaultMdLevelGroup1.0.8802.1.1.3.2.2.2
Gdot1agCfmConfigErrorListGroup1.0.8802.1.1.3.2.2.3
Gdot1agCfmMdGroup1.0.8802.1.1.3.2.2.4
Gdot1agCfmMaGroup1.0.8802.1.1.3.2.2.5
Gdot1agCfmMepGroup1.0.8802.1.1.3.2.2.6
Gdot1agCfmMepDbGroup1.0.8802.1.1.3.2.2.7
Gdot1agCfmNotificationsGroup1.0.8802.1.1.3.2.2.8

Textual conventions

Dot1afCfmIndexIntegerNextFree Unsigned32 (0..4294967295)

Display hint: d

An integer which may be used as a new Index in a table. The special value of 0 indicates that no more new entries can be created in the relevant table. When a MIB is used for configuration, an object with this SYNTAX always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. An OBJECT-TYPE definition using this SYNTAX MUST specify the relevant table for which the object is providing this functionality. 
Dot1agCfmCcmInterval INTEGER

interval100ms(3) interval10min(7) interval10ms(2) interval10s(5) interval1min(6) interval1s(4) interval300Hz(1) intervalInvalid(0)

Indicates the interval at which CCMs are sent by a MEP.
The possible values are:
intervalInvalid(0) No CCMs are sent (disabled).
interval300Hz(1)   CCMs are sent every 3 1/3 milliseconds
                   (300Hz).
interval10ms(2)    CCMs are sent every 10 milliseconds.
interval100ms(3)   CCMs are sent every 100 milliseconds.
interval1s(4)      CCMs are sent every 1 second.
interval10s(5)     CCMs are sent every 10 seconds.
interval1min(6)    CCMs are sent every minute.
interval10min(7)   CCMs are sent every 10 minutes.

Note: enumerations start at zero to match the 'CCM Interval
      field' protocol field.
Dot1agCfmConfigErrors Bits

cfmLeak(0) conflictingVids(1) excessiveLevels(2) overlappedLevels(3)

While making the MIP creation evaluation described in 802.1ag
clause 22.2.3, the management entity can encounter errors in
the configuration. These are possible errors that can be
encountered:

CFMleak(0)   MA x is associated with a specific VID list,
             one or more of the VIDs in MA x can pass through
             the Bridge Port, no Down MEP is configured on
             any Bridge Port for MA x, and some other MA y,
             at a higher MD Level than MA x, and associated
             with at least one of the VID(s) also in MA x,
             does have a MEP configured on the Bridge Port.

conflictingVids(1)  MA x is associated with a specific VID
             list, an Up MEP is configured on MA x on the
             Bridge Port, and some other MA y, associated
             with at least one of the VID(s) also in MA x,
             also has an Up MEP configured on some Bridge
             Port.

ExcessiveLevels(2)  The number of different MD Levels at
             which MIPs are to be created on this port
             exceeds the Bridge's capabilities (see
             subclause 22.3).

OverlappedLevels(3) A MEP is created for one VID at one MD
             Level, but a MEP is configured on another
             VID at that MD Level or higher, exceeding
             the Bridge's capabilities.
Dot1agCfmEgressActionFieldValue INTEGER

egrBlocked(3) egrDown(2) egrOK(1) egrVid(4)

Possible values returned in the egress action field
Dot1agCfmFngState INTEGER

fngDefect(2) fngDefectClearing(5) fngDefectReported(4) fngReportDefect(3) fngReset(1)

Indicates the diferent states of the MEP Fault Notification
Generator State Machine.

fngReset(1)            No defect has been present since the
                       dot1agCfmMepFngResetTime timer
                       expired, or since the state machine
                       was last reset.

fngDefect(2)           A defect is present, but not for a
                       long enough time to be reported
                       (dot1agCfmMepFngAlarmTime).

fngReportDefect(3)     A momentary state during which the
                       defect is reported by sending a
                       dot1agCfmFaultAlarm notification,
                       if that action is enabled.

fngDefectReported(4)   A defect is present, and some defect
                       has been reported.

fngDefectClearing(5)   No defect is present, but the
                       dot1agCfmMepFngResetTime timer has
                       not yet expired.
Dot1agCfmHighestDefectPri INTEGER

defErrorCCM(5) defMACstatus(3) defRDICCM(2) defRemoteCCM(4) defXconCCM(6) none(1)

An enumerated value, equal to the contents of the variable
highestDefect (20.33.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP
Fault Notification Generator State Machine was last in the
FNG_RESET state, either:

none(1)           no defects since FNG_RESET
defRDICCM(2)      DefRDICCM
defMACstatus(3)   DefMACstatus
defRemoteCCM(4)   DefRemoteCCM
defErrorCCM(5)    DefErrorCCM
defXconCCM(6)     DefXconCCM
Dot1agCfmIngressActionFieldValue INTEGER

ingBlocked(3) ingDown(2) ingOk(1) ingVid(4)

Possible values returned in the ingress action field.
Dot1agCfmInterfaceStatus INTEGER

isDormant(5) isDown(2) isLowerLayerDown(7) isNoInterfaceSatatusTLV(0) isNotPresent(6) isTesting(3) isUnknown(4) isUp(1)

An enumerated value from the Interface Status TLV from the
    last CCM received from the last MEP. It indicates the status
    of the Interface within which the MEP transmitting the CCM
    is configuredr, or the next lower Interface in the Interface
    Stack, if the MEP is not configured within an Interface.

isNoInterfaceSatatusTLV(0)  Indicates either that no CCM has been
                      received or that no interface status TLV
                      was present in the last CCM received.

isUp(1)               The interface is ready to pass packets.

isDown(2)             The interface cannot pass packets

isTesting(3)          The interface is in some test mode.

isUnknown(4)          The interface status cannot be determined
                      for some reason.

isDormant(5)          The interface is not in a state to pass
                      packets but is in a pending state, waiting
                      for some external event.

isNotPresent(6)       Some component of the interface is missing

isLowerLayerDown(7)   The interface is down due to state of the
                      lower layer interfaces

    NOTE: A 0 value is used for isNoInterfaceSatatusTLV, so that
          these code points can be kept consistent with new code
          points added to ifOperStatus in the IF-MIB.
Dot1agCfmLowestAlarmPri INTEGER

allDef(1) errXcon(4) macRemErrXcon(2) noDef(6) remErrXcon(3) xcon(5)

An integer value specifying the lowest priority defect
that is allowed to generate a Fault Alarm (20.9.5), either:

allDef(1)           DefRDICCM, DefMACstatus, DefRemoteCCM,
                    DefErrorCCM, and DefXconCCM;
macRemErrXcon(2)    Only DefMACstatus, DefRemoteCCM,
                    DefErrorCCM, and DefXconCCM (default);
remErrXcon(3)       Only DefRemoteCCM, DefErrorCCM,
                    and DefXconCCM;
errXcon(4)          Only DefErrorCCM and DefXconCCM;
xcon(5)             Only DefXconCCM; or
noDef(6)            No defects are to be reported;
Dot1agCfmMaintAssocName OCTET STRING (SIZE (1..45))
Denotes a generic Maintenance Association Name. It is the
part of the Maintenance Association Identifier which is
unique within the Maintenance Domain Name and is appended
to the Maintenance Domain Name to form the Maintenance
Association Identifier (MAID).

A Dot1agCfmMaintAssocName value is always interpreted within
the context of a Dot1agCfmMaintAssocNameType value.  Every
usage of the Dot1agCfmMaintAssocName textual convention is
required to specify the Dot1agCfmMaintAssocNameType object
that provides the context.  It is suggested that the
Dot1agCfmMaintAssocNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintAssocName
textual convention, if they appear in the same logical row.

The value of a Dot1agCfmMaintAssocName object must
always be consistent with the value of the associated
Dot1agCfmMaintAssocNameType object. Attempts to set
an Dot1agCfmMaintAssocName object to a value inconsistent
with the associated Dot1agCfmMaintAssocNameType must fail
with an inconsistentValue error.

When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58.  In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
Dot1agCfmMaintAssocNameType INTEGER

charString(2) primaryVid(1) rfc2865VpnId(4) unsignedInt16(3)

A value that represents a type (and thereby the format)
of a Dot1agCfmMaintAssocName.  The value can be one of
the following:


ieeeReserved(0)   Reserved for definition by IEEE 802.1
                  recommend to not use zero unless
                  absolutely needed.
primaryVid(1)     Primary VLAN ID.
                  12 bits represented in a 2-octet integer:
                  - 4 least significant bits of the first
                    byte contains the 4 most significant
                    bits of the 12 bits primary VID
                  - second byte contains the 8 least
                    significant bits of the primary VID

                         0 1 2 3 4 5 6 7 8
                         +-+-+-+-+-+-+-+-+
                         |0 0 0 0| (MSB) |
                         +-+-+-+-+-+-+-+-+
                         |  VID   LSB    |
                         +-+-+-+-+-+-+-+-+

charString(2)     RFC2579 DisplayString, except that the
                  character codes 0-31 (decimal) are not
                  used. (1..47)octets
unsignedInt16 (3) 2-octet integer/big endian
rfc2865VpnId(4)   RFC 2685 VPN ID
                  3 octet VPN authority Organizationally
                  Unique Identifier followed by 4 octet VPN
                  index identifying VPN according to the OUI:

                         0 1 2 3 4 5 6 7 8
                         +-+-+-+-+-+-+-+-+
                         | VPN OUI (MSB) |
                         +-+-+-+-+-+-+-+-+
                         |   VPN OUI     |
                         +-+-+-+-+-+-+-+-+
                         | VPN OUI (LSB) |
                         +-+-+-+-+-+-+-+-+
                         |VPN Index (MSB)|
                         +-+-+-+-+-+-+-+-+
                         |  VPN Index    |
                         +-+-+-+-+-+-+-+-+
                         |  VPN Index    |
                         +-+-+-+-+-+-+-+-+
                         |VPN Index (LSB)|
                         +-+-+-+-+-+-+-+-+

ieeeReserved(xx)  Reserved for definition by IEEE 802.1
                  xx values can be [5..31] and [64..255]
ituReserved(xx)   Reserved for definition by  ITU-T Y.1731
                  xx values range from [32..63]

To support future extensions, the Dot1agCfmMaintAssocNameType
textual convention SHOULD NOT be sub-typed in object type
definitions.  It MAY be sub-typed in compliance statements in
order to require only a subset of these address types for a
compliant implementation.

Implementations must ensure that Dot1agCfmMaintAssocNameType
objects and any dependent objects (e.g.,
Dot1agCfmMaintAssocName objects) are consistent.  An
inconsistentValue error must be generated if an attempt to
change an Dot1agCfmMaintAssocNameType object would, for
example, lead to an undefined Dot1agCfmMaintAssocName value.
In particular,
Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs
must be changed together if the nameType changes.

The Mainteanance Domain name and Maintenance Assication name,
when put together into the CCM PDU, MUST total 48 octets or
less.  If the Dot1agCfmMaintDomainNameType object contains
none(1), then the Dot1agCfmMaintAssocName object MUST be
45 octets or less in length.  Otherwise, the length of
the Dot1agCfmMaintDomainName object plus the length of the
Dot1agCfmMaintAssocName object, added together, MUST total
less than or equal to 44 octets.
Dot1agCfmMaintDomainName OCTET STRING (SIZE (1..43))
Denotes a generic Maintenance Domain Name.

A Dot1agCfmMaintDomainName value is always interpreted within
the context of a Dot1agCfmMaintDomainNameType value.  Every
usage of the Dot1agCfmMaintDomainName textual convention is
required to specify the Dot1agCfmMaintDomainNameType object
that provides the context.  It is suggested that the
Dot1agCfmMaintDomainNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintDomainName
textual convention, if they appear in the same logical row.

The value of a Dot1agCfmMaintDomainName object must always
be consistent with the value of the associated
Dot1agCfmMaintDomainNameType object. Attempts to set
an Dot1agCfmMaintDomainName object to a value inconsistent
with the associated Dot1agCfmMaintDomainNameType must fail
with an inconsistentValue error.

When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58.  In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.

A value of none(1) in the associated
Dot1agCfmMaintDomainNameType object means that no Maintenance
Domain name is present, and the contents of the
Dot1agCfmMaintDomainName object are meaningless.

See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
TEXTUAL-CONVENTION for a discussion of the length limits on
the Maintenance Domain name and Maintenance Association name.
Dot1agCfmMaintDomainNameType INTEGER

charString(4) dnsLikeName(2) macAddressAndUint(3) none(1)

A value that represents a type (and thereby the format)
of a Dot1agCfmMaintDomainName.  The value can be one of
the following:


ieeeReserved(0)   Reserved for definition by IEEE 802.1
                  recommend to not use zero unless
                  absolutely needed.
none(1)           No format specified, usually because
                  there is not (yet) a Maintenenace
                  Domain Name. In this case, a zero
                  length OCTET STRING for the Domain
                  Name field is acceptable.
dnsLikeName(2)    Domain Name like string, globally unique
                  text string derived from a DNS name.
macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
charString(4)     RFC2579 DisplayString, except that the
                  character codes 0-31 (decimal) are not
                  used.
ieeeReserved(xx)  Reserved for definition by IEEE 802.1
                  xx values can be [5..31] and [64..255]
ituReserved(xx)   Reserved for definition by  ITU-T Y.1731
                  xx values range from [32..63]

To support future extensions, the Dot1agCfmMaintDomainNameType
textual convention SHOULD NOT be sub-typed in object type
definitions.  It MAY be sub-typed in compliance statements in
order to require only a subset of these address types for a
compliant implementation.

Implementations must ensure that Dot1agCfmMaintDomainNameType
objects and any dependent objects (e.g.,
Dot1agCfmMaintDomainName objects) are consistent.  An
inconsistentValue error must be generated if an attempt to
change an Dot1agCfmMaintDomainNameType object would, for
example, lead to an undefined Dot1agCfmMaintDomainName value.
In particular,
Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs
must be changed together if the nameType changes.
Dot1agCfmMaintenanceDomainLevel Integer32 (-1 | 0..7)

Display hint: d

Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM packets.  Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for single bridges or
physical links.

The value (-1) is reserved to indicate that no MA Level has
been assigned.
Dot1agCfmMepId Unsigned32 (1..8191)

Display hint: d

Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
Dot1agCfmMepIdOrZero Unsigned32 (0 | 1..8191)

Display hint: d

Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.

The special value 0 is allowed to indicate special cases, for
example that no MEPID is configured in a given Maintenance
Assosiation point.

Whenever an object is defined with this SYNTAX, then the
DESCRIPTION clause of such an object MUST specify what the
special value of 0 means.
Dot1agCfmMhfCreation INTEGER

defMHFdefault(2) defMHFexplicit(3) defMHFnone(1)

Indicates if the Management Entity can create MHFs.
The valid values are:

defMHFnone(1)      No MHFs can be created for this VID.
defMHFdefault(2)   MHFs can be created on this VID on any
                   Bridge port through which this VID can
                   pass.
defMHFexplicit(3)  MHFs can be created for this VID only on
                   Bridge ports through which this VID can
                   pass, and only if a MEP is created at some
                   lower MA Level.
Dot1agCfmMpDirection INTEGER

down(1) up(2)

Indicates the direction in which the Maintenance
association (MEP or MIP) faces on the bridge port:

down(1)    Sends Continuity Check Messages away from the
           MAC Relay Entity.
up(2)      Sends Continuity Check Messages towards the
           MAC Relay Entity.
Dot1agCfmPortStatus INTEGER

psBlocked(1) psNoPortStateTLV(0) psUp(2)

An enumerated value from he Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the
Bridge Port on which the transmitting MEP resides to pass
ordinary data, regardless of the status of the MAC
(Table 21-10).

psNoPortStateTLV(0) Indicates either that no CCM has been
                    received or that no port status TLV was
                    present in the last CCM received.

psBlocked(1)        Ordinary data cannot pass freely through
                    the port on which the remote MEP resides.
                    Value of enableRmepDefect is equal to
                    false.

psUp(2):            Ordinary data can pass freely through
                    the port on which the remote MEP resides.
                    Value of enableRmepDefect is equal to
                    true.

NOTE: A 0 value is used for psNoPortStateTLV, so that
      additional code points can be added in a manner
      consistent with the Dot1agCfmInterfaceStatus textual
      convention.
Dot1agCfmRelayActionFieldValue INTEGER

rlyFdb(2) rlyHit(1) rlyMpdb(3)

Possible values the Relay action field can take.
Dot1agCfmRemoteMepState INTEGER

rMepFailed(3) rMepIdle(1) rMepOk(4) rMepStart(2)

Operational state of the remote MEP state machine.  This
state machine motitors the reception of valid CCMs from a
remote MEP with a specific MEPID.  It uses a timer that
expires in 3.5 times the lengh of time indicated by the
dot1agCfmMaCcmInterval object.

rMepIdle(1)            Momentary state during reset.

rMepStart(2)           The timer has not expired since the
                       state machine was reset, and no valid
                       CCM has yet been received.

rMepFailed(3)          The timer has expired, both since the
                       state machine was reset, and since a
                       valid CCM was received.

rMepOk(4)              The timer has not expired since a
                       valid CCM was received.

Used by