MIB Browser

IEEE8021-CFMD8-MIB

Standards (IEEE)
Connectivity Fault Management module for managing IEEE 802.1ag
Organization
IEEE 802.1 Working Group
Root OID
1.3.111.2.802.1.1.8
Last updated
Objects
163
Source
Show full MIB
snmptranslate -m IEEE8021-CFMD8-MIB -Tp
snmpwalk -v2c -c <community> -m IEEE8021-CFMD8-MIB <host> 1.3.111.2.802.1.1.8

Imports

IF-MIBInterfaceIndex, InterfaceIndexOrZero
LLDP-MIBLldpChassisId, LldpChassisIdSubtype, LldpPortId, LldpPortIdSubtype
Q-BRIDGE-MIBVlanId, VlanIdOrNone
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, MacAddress, PhysAddress, RowStatus, TAddress, TDomain, TEXTUAL-CONVENTION, TimeInterval, TimeStamp, TruthValue

OID tree

NameOIDTypeAccessStatusExample
Iieee8021cfmMIB1.3.111.2.802.1.1.8
Ndot1agNotifications1.3.111.2.802.1.1.8.0
!dot1agCfmFaultAlarm1.3.111.2.802.1.1.8.0.1
Ndot1agMIBObjects1.3.111.2.802.1.1.8.1
Ndot1agCfmStack1.3.111.2.802.1.1.8.1.1
Tdot1agCfmStackTable1.3.111.2.802.1.1.8.1.1.1NA
Rdot1agCfmStackEntry1.3.111.2.802.1.1.8.1.1.1.1NA
Cdot1agCfmStackifIndex1.3.111.2.802.1.1.8.1.1.1.1.1InterfaceIndexNA
Cdot1agCfmStackVlanIdOrNone1.3.111.2.802.1.1.8.1.1.1.1.2VlanIdOrNoneNA
Cdot1agCfmStackMdLevel1.3.111.2.802.1.1.8.1.1.1.1.3Dot1agCfmMDLevelNA
Cdot1agCfmStackDirection1.3.111.2.802.1.1.8.1.1.1.1.4Dot1agCfmMpDirectionNA
Cdot1agCfmStackMdIndex1.3.111.2.802.1.1.8.1.1.1.1.5Unsigned32RO
Cdot1agCfmStackMaIndex1.3.111.2.802.1.1.8.1.1.1.1.6Unsigned32RO
Cdot1agCfmStackMepId1.3.111.2.802.1.1.8.1.1.1.1.7Dot1agCfmMepIdOrZeroRO
Cdot1agCfmStackMacAddress1.3.111.2.802.1.1.8.1.1.1.1.8MacAddressRO
Ndot1agCfmDefaultMd1.3.111.2.802.1.1.8.1.2
Sdot1agCfmDefaultMdDefLevel1.3.111.2.802.1.1.8.1.2.1Dot1agCfmMDLevelRW0
Sdot1agCfmDefaultMdDefMhfCreation1.3.111.2.802.1.1.8.1.2.2Dot1agCfmMhfCreationRW1
Sdot1agCfmDefaultMdDefIdPermission1.3.111.2.802.1.1.8.1.2.3Dot1agCfmIdPermissionRW1
Tdot1agCfmDefaultMdTable1.3.111.2.802.1.1.8.1.2.4NA
Rdot1agCfmDefaultMdEntry1.3.111.2.802.1.1.8.1.2.4.1NA
Cdot1agCfmDefaultMdPrimaryVid1.3.111.2.802.1.1.8.1.2.4.1.1VlanIdNA
Cdot1agCfmDefaultMdStatus1.3.111.2.802.1.1.8.1.2.4.1.2TruthValueRO
Cdot1agCfmDefaultMdLevel1.3.111.2.802.1.1.8.1.2.4.1.3Dot1agCfmMDLevelOrNoneRW
Cdot1agCfmDefaultMdMhfCreation1.3.111.2.802.1.1.8.1.2.4.1.4Dot1agCfmMhfCreationRW
Cdot1agCfmDefaultMdIdPermission1.3.111.2.802.1.1.8.1.2.4.1.5Dot1agCfmIdPermissionRW
Ndot1agCfmVlan1.3.111.2.802.1.1.8.1.3
Tdot1agCfmVlanTable1.3.111.2.802.1.1.8.1.3.1NA
Rdot1agCfmVlanEntry1.3.111.2.802.1.1.8.1.3.1.1NA
Cdot1agCfmVlanVid1.3.111.2.802.1.1.8.1.3.1.1.1VlanIdNA
Cdot1agCfmVlanPrimaryVid1.3.111.2.802.1.1.8.1.3.1.1.2VlanIdRC
Cdot1agCfmVlanRowStatus1.3.111.2.802.1.1.8.1.3.1.1.3RowStatusRC
Ndot1agCfmConfigErrorList1.3.111.2.802.1.1.8.1.4
Tdot1agCfmConfigErrorListTable1.3.111.2.802.1.1.8.1.4.1NA
Rdot1agCfmConfigErrorListEntry1.3.111.2.802.1.1.8.1.4.1.1NA
Cdot1agCfmConfigErrorListVid1.3.111.2.802.1.1.8.1.4.1.1.1VlanIdNA
Cdot1agCfmConfigErrorListIfIndex1.3.111.2.802.1.1.8.1.4.1.1.2InterfaceIndexNA
Cdot1agCfmConfigErrorListErrorType1.3.111.2.802.1.1.8.1.4.1.1.3Dot1agCfmConfigErrorsRO
Ndot1agCfmMd1.3.111.2.802.1.1.8.1.5
Sdot1agCfmMdTableNextIndex1.3.111.2.802.1.1.8.1.5.1Dot1afCfmIndexIntegerNextFreeRO0
Tdot1agCfmMdTable1.3.111.2.802.1.1.8.1.5.2NA
Rdot1agCfmMdEntry1.3.111.2.802.1.1.8.1.5.2.1NA
Cdot1agCfmMdIndex1.3.111.2.802.1.1.8.1.5.2.1.1Unsigned32 (1..4294967295)NA
Cdot1agCfmMdFormat1.3.111.2.802.1.1.8.1.5.2.1.2Dot1agCfmMaintDomainNameTypeRC
Cdot1agCfmMdName1.3.111.2.802.1.1.8.1.5.2.1.3Dot1agCfmMaintDomainNameRC
Cdot1agCfmMdMdLevel1.3.111.2.802.1.1.8.1.5.2.1.4Dot1agCfmMDLevelRC
Cdot1agCfmMdMhfCreation1.3.111.2.802.1.1.8.1.5.2.1.5Dot1agCfmMhfCreationRC
Cdot1agCfmMdMhfIdPermission1.3.111.2.802.1.1.8.1.5.2.1.6Dot1agCfmIdPermissionRC
Cdot1agCfmMdMaTableNextIndex1.3.111.2.802.1.1.8.1.5.2.1.7Dot1afCfmIndexIntegerNextFreeRO
Cdot1agCfmMdRowStatus1.3.111.2.802.1.1.8.1.5.2.1.8RowStatusRC
Ndot1agCfmMa1.3.111.2.802.1.1.8.1.6
Tdot1agCfmMaTable1.3.111.2.802.1.1.8.1.6.1NA
Rdot1agCfmMaEntry1.3.111.2.802.1.1.8.1.6.1.1NA
Cdot1agCfmMaIndex1.3.111.2.802.1.1.8.1.6.1.1.1Unsigned32 (1..4294967295)NA
Cdot1agCfmMaPrimaryVlanId1.3.111.2.802.1.1.8.1.6.1.1.2VlanIdOrNoneRC
Cdot1agCfmMaFormat1.3.111.2.802.1.1.8.1.6.1.1.3Dot1agCfmMaintAssocNameTypeRC
Cdot1agCfmMaName1.3.111.2.802.1.1.8.1.6.1.1.4Dot1agCfmMaintAssocNameRC
Cdot1agCfmMaMhfCreation1.3.111.2.802.1.1.8.1.6.1.1.5Dot1agCfmMhfCreationRC
Cdot1agCfmMaIdPermission1.3.111.2.802.1.1.8.1.6.1.1.6Dot1agCfmIdPermissionRC
Cdot1agCfmMaCcmInterval1.3.111.2.802.1.1.8.1.6.1.1.7Dot1agCfmCcmIntervalRC
Cdot1agCfmMaNumberOfVids1.3.111.2.802.1.1.8.1.6.1.1.8Unsigned32RC
Cdot1agCfmMaRowStatus1.3.111.2.802.1.1.8.1.6.1.1.9RowStatusRC
Tdot1agCfmMaMepListTable1.3.111.2.802.1.1.8.1.6.3NA
Rdot1agCfmMaMepListEntry1.3.111.2.802.1.1.8.1.6.3.1NA
Cdot1agCfmMaMepListIdentifier1.3.111.2.802.1.1.8.1.6.3.1.1Dot1agCfmMepIdNA
Cdot1agCfmMaMepListRowStatus1.3.111.2.802.1.1.8.1.6.3.1.2RowStatusRC
Ndot1agCfmMep1.3.111.2.802.1.1.8.1.7
Tdot1agCfmMepTable1.3.111.2.802.1.1.8.1.7.1NA
Rdot1agCfmMepEntry1.3.111.2.802.1.1.8.1.7.1.1NA
Cdot1agCfmMepIdentifier1.3.111.2.802.1.1.8.1.7.1.1.1Dot1agCfmMepIdNA
Cdot1agCfmMepIfIndex1.3.111.2.802.1.1.8.1.7.1.1.2InterfaceIndexOrZeroRC
Cdot1agCfmMepDirection1.3.111.2.802.1.1.8.1.7.1.1.3Dot1agCfmMpDirectionRC
Cdot1agCfmMepPrimaryVid1.3.111.2.802.1.1.8.1.7.1.1.4Unsigned32 (0..16777215)RC
Cdot1agCfmMepActive1.3.111.2.802.1.1.8.1.7.1.1.5TruthValueRC
Cdot1agCfmMepFngState1.3.111.2.802.1.1.8.1.7.1.1.6Dot1agCfmFngStateRO
Cdot1agCfmMepCciEnabled1.3.111.2.802.1.1.8.1.7.1.1.7TruthValueRC
Cdot1agCfmMepCcmLtmPriority1.3.111.2.802.1.1.8.1.7.1.1.8Unsigned32 (0..7)RC
Cdot1agCfmMepMacAddress1.3.111.2.802.1.1.8.1.7.1.1.9MacAddressRO
Cdot1agCfmMepLowPrDef1.3.111.2.802.1.1.8.1.7.1.1.10Dot1agCfmLowestAlarmPriRC
Cdot1agCfmMepFngAlarmTime1.3.111.2.802.1.1.8.1.7.1.1.11TimeInterval (250..1000)RC
Cdot1agCfmMepFngResetTime1.3.111.2.802.1.1.8.1.7.1.1.12TimeInterval (250..1000)RC
Cdot1agCfmMepHighestPrDefect1.3.111.2.802.1.1.8.1.7.1.1.13Dot1agCfmHighestDefectPriRO
Cdot1agCfmMepDefects1.3.111.2.802.1.1.8.1.7.1.1.14Dot1agCfmMepDefectsRO
Cdot1agCfmMepErrorCcmLastFailure1.3.111.2.802.1.1.8.1.7.1.1.15OCTET STRING (SIZE (1..1522))RO
Cdot1agCfmMepXconCcmLastFailure1.3.111.2.802.1.1.8.1.7.1.1.16OCTET STRING (SIZE (1..1522))RO
Cdot1agCfmMepCcmSequenceErrors1.3.111.2.802.1.1.8.1.7.1.1.17Counter32RO
Cdot1agCfmMepCciSentCcms1.3.111.2.802.1.1.8.1.7.1.1.18Counter32RO
Cdot1agCfmMepNextLbmTransId1.3.111.2.802.1.1.8.1.7.1.1.19Unsigned32RO
Cdot1agCfmMepLbrIn1.3.111.2.802.1.1.8.1.7.1.1.20Counter32RO
Cdot1agCfmMepLbrInOutOfOrder1.3.111.2.802.1.1.8.1.7.1.1.21Counter32RO
Cdot1agCfmMepLbrBadMsdu1.3.111.2.802.1.1.8.1.7.1.1.22Counter32RO
Cdot1agCfmMepLtmNextSeqNumber1.3.111.2.802.1.1.8.1.7.1.1.23Unsigned32RO
Cdot1agCfmMepUnexpLtrIn1.3.111.2.802.1.1.8.1.7.1.1.24Counter32RO
Cdot1agCfmMepLbrOut1.3.111.2.802.1.1.8.1.7.1.1.25Counter32RO
Cdot1agCfmMepTransmitLbmStatus1.3.111.2.802.1.1.8.1.7.1.1.26TruthValueRC
Cdot1agCfmMepTransmitLbmDestMacAddress1.3.111.2.802.1.1.8.1.7.1.1.27MacAddressRC
Cdot1agCfmMepTransmitLbmDestMepId1.3.111.2.802.1.1.8.1.7.1.1.28Dot1agCfmMepIdOrZeroRC
Cdot1agCfmMepTransmitLbmDestIsMepId1.3.111.2.802.1.1.8.1.7.1.1.29TruthValueRC
Cdot1agCfmMepTransmitLbmMessages1.3.111.2.802.1.1.8.1.7.1.1.30Integer32 (1..1024)RC
Cdot1agCfmMepTransmitLbmDataTlv1.3.111.2.802.1.1.8.1.7.1.1.31OCTET STRING (SIZE (0..1500))RC
Cdot1agCfmMepTransmitLbmVlanPriority1.3.111.2.802.1.1.8.1.7.1.1.32Integer32 (0..7)RC
Cdot1agCfmMepTransmitLbmVlanDropEnable1.3.111.2.802.1.1.8.1.7.1.1.33TruthValueRC
Cdot1agCfmMepTransmitLbmResultOK1.3.111.2.802.1.1.8.1.7.1.1.34TruthValueRO
Cdot1agCfmMepTransmitLbmSeqNumber1.3.111.2.802.1.1.8.1.7.1.1.35Unsigned32RO
Cdot1agCfmMepTransmitLtmStatus1.3.111.2.802.1.1.8.1.7.1.1.36TruthValueRO
Cdot1agCfmMepTransmitLtmFlags1.3.111.2.802.1.1.8.1.7.1.1.37BitsRC
Cdot1agCfmMepTransmitLtmTargetMacAddress1.3.111.2.802.1.1.8.1.7.1.1.38MacAddressRC
Cdot1agCfmMepTransmitLtmTargetMepId1.3.111.2.802.1.1.8.1.7.1.1.39Dot1agCfmMepIdOrZeroRC
Cdot1agCfmMepTransmitLtmTargetIsMepId1.3.111.2.802.1.1.8.1.7.1.1.40TruthValueRC
Cdot1agCfmMepTransmitLtmTtl1.3.111.2.802.1.1.8.1.7.1.1.41Unsigned32 (0..255)RC
Cdot1agCfmMepTransmitLtmResult1.3.111.2.802.1.1.8.1.7.1.1.42TruthValueRO
Cdot1agCfmMepTransmitLtmSeqNumber1.3.111.2.802.1.1.8.1.7.1.1.43Unsigned32RO
Cdot1agCfmMepTransmitLtmEgressIdentifier1.3.111.2.802.1.1.8.1.7.1.1.44OCTET STRING (SIZE (8))RC
Cdot1agCfmMepRowStatus1.3.111.2.802.1.1.8.1.7.1.1.45RowStatusRC
Tdot1agCfmLtrTable1.3.111.2.802.1.1.8.1.7.2NA
Rdot1agCfmLtrEntry1.3.111.2.802.1.1.8.1.7.2.1NA
Cdot1agCfmLtrSeqNumber1.3.111.2.802.1.1.8.1.7.2.1.1Unsigned32 (0..4294967295)NA
Cdot1agCfmLtrReceiveOrder1.3.111.2.802.1.1.8.1.7.2.1.2Unsigned32 (1..4294967295)NA
Cdot1agCfmLtrTtl1.3.111.2.802.1.1.8.1.7.2.1.3Unsigned32 (0..255)RO
Cdot1agCfmLtrForwarded1.3.111.2.802.1.1.8.1.7.2.1.4TruthValueRO
Cdot1agCfmLtrTerminalMep1.3.111.2.802.1.1.8.1.7.2.1.5TruthValueRO
Cdot1agCfmLtrLastEgressIdentifier1.3.111.2.802.1.1.8.1.7.2.1.6OCTET STRING (SIZE (8))RO
Cdot1agCfmLtrNextEgressIdentifier1.3.111.2.802.1.1.8.1.7.2.1.7OCTET STRING (SIZE (8))RO
Cdot1agCfmLtrRelay1.3.111.2.802.1.1.8.1.7.2.1.8Dot1agCfmRelayActionFieldValueRO
Cdot1agCfmLtrChassisIdSubtype1.3.111.2.802.1.1.8.1.7.2.1.9LldpChassisIdSubtypeRO
Cdot1agCfmLtrChassisId1.3.111.2.802.1.1.8.1.7.2.1.10LldpChassisIdRO
Cdot1agCfmLtrManAddressDomain1.3.111.2.802.1.1.8.1.7.2.1.11TDomainRO
Cdot1agCfmLtrManAddress1.3.111.2.802.1.1.8.1.7.2.1.12TAddressRO
Cdot1agCfmLtrIngress1.3.111.2.802.1.1.8.1.7.2.1.13Dot1agCfmIngressActionFieldValueRO
Cdot1agCfmLtrIngressMac1.3.111.2.802.1.1.8.1.7.2.1.14MacAddressRO
Cdot1agCfmLtrIngressPortIdSubtype1.3.111.2.802.1.1.8.1.7.2.1.15LldpPortIdSubtypeRO
Cdot1agCfmLtrIngressPortId1.3.111.2.802.1.1.8.1.7.2.1.16LldpPortIdRO
Cdot1agCfmLtrEgress1.3.111.2.802.1.1.8.1.7.2.1.17Dot1agCfmEgressActionFieldValueRO
Cdot1agCfmLtrEgressMac1.3.111.2.802.1.1.8.1.7.2.1.18MacAddressRO
Cdot1agCfmLtrEgressPortIdSubtype1.3.111.2.802.1.1.8.1.7.2.1.19LldpPortIdSubtypeRO
Cdot1agCfmLtrEgressPortId1.3.111.2.802.1.1.8.1.7.2.1.20LldpPortIdRO
Cdot1agCfmLtrOrganizationSpecificTlv1.3.111.2.802.1.1.8.1.7.2.1.21OCTET STRING (SIZE (0 | 4..1500))RO
Tdot1agCfmMepDbTable1.3.111.2.802.1.1.8.1.7.3NA
Rdot1agCfmMepDbEntry1.3.111.2.802.1.1.8.1.7.3.1NA
Cdot1agCfmMepDbRMepIdentifier1.3.111.2.802.1.1.8.1.7.3.1.1Dot1agCfmMepIdNA
Cdot1agCfmMepDbRMepState1.3.111.2.802.1.1.8.1.7.3.1.2Dot1agCfmRemoteMepStateRO
Cdot1agCfmMepDbRMepFailedOkTime1.3.111.2.802.1.1.8.1.7.3.1.3TimeStampRO
Cdot1agCfmMepDbMacAddress1.3.111.2.802.1.1.8.1.7.3.1.4MacAddressRO
Cdot1agCfmMepDbRdi1.3.111.2.802.1.1.8.1.7.3.1.5TruthValueRO
Cdot1agCfmMepDbPortStatusTlv1.3.111.2.802.1.1.8.1.7.3.1.6Dot1agCfmPortStatusRO
Cdot1agCfmMepDbInterfaceStatusTlv1.3.111.2.802.1.1.8.1.7.3.1.7Dot1agCfmInterfaceStatusRO
Cdot1agCfmMepDbChassisIdSubtype1.3.111.2.802.1.1.8.1.7.3.1.8LldpChassisIdSubtypeRO
Cdot1agCfmMepDbChassisId1.3.111.2.802.1.1.8.1.7.3.1.9LldpChassisIdRO
Cdot1agCfmMepDbManAddressDomain1.3.111.2.802.1.1.8.1.7.3.1.10TDomainRO
Cdot1agCfmMepDbManAddress1.3.111.2.802.1.1.8.1.7.3.1.11TAddressRO
Ndot1agCfmConformance1.3.111.2.802.1.1.8.2
Ndot1agCfmCompliances1.3.111.2.802.1.1.8.2.1
Mdot1agCfmCompliance1.3.111.2.802.1.1.8.2.1.1
Ndot1agCfmGroups1.3.111.2.802.1.1.8.2.2
Gdot1agCfmStackGroup1.3.111.2.802.1.1.8.2.2.1
Gdot1agCfmDefaultMdGroup1.3.111.2.802.1.1.8.2.2.2
Gdot1agCfmVlanIdGroup1.3.111.2.802.1.1.8.2.2.3
Gdot1agCfmConfigErrorListGroup1.3.111.2.802.1.1.8.2.2.4
Gdot1agCfmMdGroup1.3.111.2.802.1.1.8.2.2.5
Gdot1agCfmMaGroup1.3.111.2.802.1.1.8.2.2.6
Gdot1agCfmMepGroup1.3.111.2.802.1.1.8.2.2.7
Gdot1agCfmMepDbGroup1.3.111.2.802.1.1.8.2.2.8
Gdot1agCfmNotificationsGroup1.3.111.2.802.1.1.8.2.2.9

Textual conventions

Dot1afCfmIndexIntegerNextFree Unsigned32 (0..4294967295)

Display hint: d

An integer which may be used as a new Index in a table. The special value of 0 indicates that no more new entries can be created in the relevant table. When a MIB is used for configuration, an object with this SYNTAX always contains a legal value (if non-zero) for an index that is not currently used in the relevant table. The Command Generator (Network Management Application) reads this variable and uses the (non-zero) value read when creating a new row with an SNMP SET. When the SET is performed, the Command Responder (agent) must determine whether the value is indeed still unused; Two Network Management Applications may attempt to create a row (configuration entry) simultaneously and use the same value. If it is currently unused, the SET succeeds and the Command Responder (agent) changes the value of this object, according to an implementation-specific algorithm. If the value is in use, however, the SET fails. The Network Management Application must then re-read this variable to obtain a new usable value. An OBJECT-TYPE definition using this SYNTAX MUST specify the relevant table for which the object is providing this functionality. 
Dot1agCfmCcmInterval INTEGER

interval100ms(3) interval10min(7) interval10ms(2) interval10s(5) interval1min(6) interval1s(4) interval300Hz(1) intervalInvalid(0)

Indicates the interval at which CCMs are sent by a MEP.
The possible values are:
intervalInvalid(0) No CCMs are sent (disabled).
interval300Hz(1) CCMs are sent every 3 1/3 milliseconds
(300Hz).
interval10ms(2) CCMs are sent every 10 milliseconds.
interval100ms(3) CCMs are sent every 100 milliseconds.
interval1s(4) CCMs are sent every 1 second.
interval10s(5) CCMs are sent every 10 seconds.
interval1min(6) CCMs are sent every minute.
interval10min(7) CCMs are sent every 10 minutes.
Note: enumerations start at zero to match the 'CCM Interval
field' protocol field.
Dot1agCfmConfigErrors Bits

cfmLeak(0) conflictingVids(1) excessiveLevels(2) overlappedLevels(3)

While making the MIP creation evaluation described in 802.1ag
clause 22.2.3, the management entity can encounter errors in
the configuration. These are possible errors that can be
encountered:
CFMleak(0) MA x is associated with a specific VID list,
one or more of the VIDs in MA x can pass through
the Bridge Port, no Down MEP is configured on
any Bridge Port for MA x, and some other MA y,
at a higher MD Level than MA x, and associated
with at least one of the VID(s) also in MA x,
does have a MEP configured on the Bridge Port.
conflictingVids(1) MA x is associated with a specific VID
list, an Up MEP is configured on MA x on the
Bridge Port, and some other MA y, associated
with at least one of the VID(s) also in MA x,
also has an Up MEP configured on some Bridge
Port.
ExcessiveLevels(2) The number of different MD Levels at
which MIPs are to be created on this port
exceeds the Bridge's capabilities (see
subclause 22.3).
OverlappedLevels(3) A MEP is created for one VID at one MD
Level, but a MEP is configured on another
VID at that MD Level or higher, exceeding
the Bridge's capabilities.
Dot1agCfmEgressActionFieldValue INTEGER

egrBlocked(3) egrDown(2) egrOK(1) egrVid(4)

Possible values returned in the egress action field
Dot1agCfmFngState INTEGER

fngDefect(2) fngDefectClearing(5) fngDefectReported(4) fngReportDefect(3) fngReset(1)

Indicates the diferent states of the MEP Fault Notification
Generator State Machine.
fngReset(1) No defect has been present since the
dot1agCfmMepFngResetTime timer
expired, or since the state machine
was last reset.
fngDefect(2) A defect is present, but not for a
long enough time to be reported
(dot1agCfmMepFngAlarmTime).
fngReportDefect(3) A momentary state during which the
defect is reported by sending a
dot1agCfmFaultAlarm notification,
if that action is enabled.
fngDefectReported(4) A defect is present, and some defect
has been reported.
fngDefectClearing(5) No defect is present, but the
dot1agCfmMepFngResetTime timer has
not yet expired.
Dot1agCfmHighestDefectPri INTEGER

defErrorCCM(4) defMACstatus(2) defRDICCM(1) defRemoteCCM(3) defXconCCM(5) none(0)

An enumerated value, equal to the contents of the variable
highestDefect (20.33.9 and Table 20-1), indicating the
highest-priority defect that has been present since the MEP
Fault Notification Generator State Machine was last in the
FNG_RESET state, either:
none(0) no defects since FNG_RESET
defRDICCM(1) DefRDICCM
defMACstatus(2) DefMACstatus
defRemoteCCM(3) DefRemoteCCM
defErrorCCM(4) DefErrorCCM
defXconCCM(5) DefXconCCM
The value 0 is used for no defects so that additional higher
priority values can be added, if needed, at a later time, and
so that these values correspond with those in
Dot1agCfmLowestAlarmPri.
Dot1agCfmIdPermission INTEGER

sendIdChassis(2) sendIdChassisManage(4) sendIdDefer(5) sendIdManage(3) sendIdNone(1)

Indicates what, if anything, is to be included in the Sender
ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid
values are:
sendIdNone(1) The Sender ID TLV is not to be sent.
sendIdChassis(2) The Chassis ID Length, Chassis ID
Subtype, and Chassis ID fields of the
Sender ID TLV are to be sent.
sendIdManage(3) The Management Address Length and
Management Address of the Sender ID TLV
are to be sent.
sendIdChassisManage(4) The Chassis ID Length, Chassis ID
Subtype, Chassis ID, Management Address
Length and Management Address fields are
all to be sent.
sendIdDefer(5) The contents of the Sender ID TLV are
determined by the corresponding
Maintenance Domain variable
(dot1agCfmMaIdPermission).
Dot1agCfmIngressActionFieldValue INTEGER

ingBlocked(3) ingDown(2) ingOk(1) ingVid(4)

Possible values returned in the ingress action field.
Dot1agCfmInterfaceStatus INTEGER

isDormant(5) isDown(2) isLowerLayerDown(7) isNoInterfaceStatusTLV(0) isNotPresent(6) isTesting(3) isUnknown(4) isUp(1)

An enumerated value from the Interface Status TLV from the
last CCM received from the last MEP. It indicates the status
of the Interface within which the MEP transmitting the CCM
is configured, or the next lower Interface in the Interface
Stack, if the MEP is not configured within an Interface.
isNoInterfaceStatusTLV(0) Indicates either that no CCM has been
received or that no interface status TLV
was present in the last CCM received.
isUp(1) The interface is ready to pass packets.
isDown(2) The interface cannot pass packets
isTesting(3) The interface is in some test mode.
isUnknown(4) The interface status cannot be determined
for some reason.
isDormant(5) The interface is not in a state to pass
packets but is in a pending state, waiting
for some external event.
isNotPresent(6) Some component of the interface is missing
isLowerLayerDown(7) The interface is down due to state of the
lower layer interfaces
NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that
these code points can be kept consistent with new code
points added to ifOperStatus in the IF-MIB.
Dot1agCfmLowestAlarmPri INTEGER

allDef(1) errXcon(4) macRemErrXcon(2) noXcon(6) remErrXcon(3) xcon(5)

An integer value specifying the lowest priority defect
that is allowed to generate a Fault Alarm (20.9.5), either:
allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM,
DefErrorCCM, and DefXconCCM;
macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM,
DefErrorCCM, and DefXconCCM (default);
remErrXcon(3) Only DefRemoteCCM, DefErrorCCM,
and DefXconCCM;
errXcon(4) Only DefErrorCCM and DefXconCCM;
xcon(5) Only DefXconCCM; or
noXcon(6) No defects DefXcon or lower are to be
reported;
Dot1agCfmMDLevel Integer32 (0..7)

Display hint: d

Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM PDUs. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links.
Dot1agCfmMDLevelOrNone Integer32 (-1 | 0..7)

Display hint: d

Integer identifying the Maintenance Domain Level (MD Level).
Higher numbers correspond to higher Maintenance Domains,
those with the greatest physical reach, with the highest
values for customers' CFM packets. Lower numbers correspond
to lower Maintenance Domains, those with more limited
physical reach, with the lowest values for CFM PDUs
protecting single bridges or physical links.
The value (-1) is reserved to indicate that no MA Level has
been assigned.
Dot1agCfmMaintAssocName OCTET STRING (SIZE (1..45))
Denotes a generic Maintenance Association Name. It is the
part of the Maintenance Association Identifier which is
unique within the Maintenance Domain Name and is appended
to the Maintenance Domain Name to form the Maintenance
Association Identifier (MAID).
A Dot1agCfmMaintAssocName value is always interpreted within
the context of a Dot1agCfmMaintAssocNameType value. Every
usage of the Dot1agCfmMaintAssocName textual convention is
required to specify the Dot1agCfmMaintAssocNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintAssocNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintAssocName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintAssocName object must
always be consistent with the value of the associated
Dot1agCfmMaintAssocNameType object. Attempts to set
an Dot1agCfmMaintAssocName object to a value inconsistent
with the associated Dot1agCfmMaintAssocNameType must fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
Dot1agCfmMaintAssocNameType INTEGER

charString(2) primaryVid(1) rfc2865VpnId(4) unsignedInt16(3)

A value that represents a type (and thereby the format)
of a Dot1agCfmMaintAssocName. The value can be one of
the following:
ieeeReserved(0) Reserved for definition by IEEE 802.1
recommend to not use zero unless
absolutely needed.
primaryVid(1) Primary VLAN ID.
12 bits represented in a 2-octet integer:
- 4 least significant bits of the first
byte contains the 4 most significant
bits of the 12 bits primary VID
- second byte contains the 8 least
significant bits of the primary VID
0 1 2 3 4 5 6 7 8
+-+-+-+-+-+-+-+-+
|0 0 0 0| (MSB) |
+-+-+-+-+-+-+-+-+
| VID LSB |
+-+-+-+-+-+-+-+-+
charString(2) RFC2579 DisplayString, except that the
character codes 0-31 (decimal) are not
used. (1..45) octets
unsignedInt16 (3) 2-octet integer/big endian
rfc2865VpnId(4) RFC 2685 VPN ID
3 octet VPN authority Organizationally
Unique Identifier followed by 4 octet VPN
index identifying VPN according to the OUI:
0 1 2 3 4 5 6 7 8
+-+-+-+-+-+-+-+-+
| VPN OUI (MSB) |
+-+-+-+-+-+-+-+-+
| VPN OUI |
+-+-+-+-+-+-+-+-+
| VPN OUI (LSB) |
+-+-+-+-+-+-+-+-+
|VPN Index (MSB)|
+-+-+-+-+-+-+-+-+
| VPN Index |
+-+-+-+-+-+-+-+-+
| VPN Index |
+-+-+-+-+-+-+-+-+
|VPN Index (LSB)|
+-+-+-+-+-+-+-+-+
ieeeReserved(xx) Reserved for definition by IEEE 802.1
xx values can be [5..31] and [64..255]
ituReserved(xx) Reserved for definition by ITU-T Y.1731
xx values range from [32..63]
To support future extensions, the Dot1agCfmMaintAssocNameType
textual convention SHOULD NOT be sub-typed in object type
definitions. It MAY be sub-typed in compliance statements in
order to require only a subset of these address types for a
compliant implementation.
Implementations must ensure that Dot1agCfmMaintAssocNameType
objects and any dependent objects (e.g.,
Dot1agCfmMaintAssocName objects) are consistent. An
inconsistentValue error must be generated if an attempt to
change an Dot1agCfmMaintAssocNameType object would, for
example, lead to an undefined Dot1agCfmMaintAssocName value.
In particular,
Dot1agCfmMaintAssocNameType/Dot1agCfmMaintAssocName pairs
must be changed together if the nameType changes.
The Maintenance Domain name and Maintenance Association name,
when put together into the CCM PDU, MUST total 48 octets or
less. If the Dot1agCfmMaintDomainNameType object contains
none(1), then the Dot1agCfmMaintAssocName object MUST be
45 octets or less in length. Otherwise, the length of
the Dot1agCfmMaintDomainName object plus the length of the
Dot1agCfmMaintAssocName object, added together, MUST total
less than or equal to 44 octets.
Dot1agCfmMaintDomainName OCTET STRING (SIZE (1..43))
Denotes a generic Maintenance Domain Name.
A Dot1agCfmMaintDomainName value is always interpreted within
the context of a Dot1agCfmMaintDomainNameType value. Every
usage of the Dot1agCfmMaintDomainName textual convention is
required to specify the Dot1agCfmMaintDomainNameType object
that provides the context. It is suggested that the
Dot1agCfmMaintDomainNameType object be logically registered
before the object(s) that use the Dot1agCfmMaintDomainName
textual convention, if they appear in the same logical row.
The value of a Dot1agCfmMaintDomainName object must always
be consistent with the value of the associated
Dot1agCfmMaintDomainNameType object. Attempts to set
an Dot1agCfmMaintDomainName object to a value inconsistent
with the associated Dot1agCfmMaintDomainNameType must fail
with an inconsistentValue error.
When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, IETF STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers;
otherwise the applicable constraints MUST be stated in
the appropriate conceptual row DESCRIPTION clauses, or
in the surrounding documentation if there is no single
DESCRIPTION clause that is appropriate.
A value of none(1) in the associated
Dot1agCfmMaintDomainNameType object means that no Maintenance
Domain name is present, and the contents of the
Dot1agCfmMaintDomainName object are meaningless.
See the DESCRIPTION of the Dot1agCfmMaintAssocNameType
TEXTUAL-CONVENTION for a discussion of the length limits on
the Maintenance Domain name and Maintenance Association name.
Dot1agCfmMaintDomainNameType INTEGER

charString(4) dnsLikeName(2) macAddressAndUint(3) none(1)

A value that represents a type (and thereby the format)
of a Dot1agCfmMaintDomainName. The value can be one of
the following:
ieeeReserved(0) Reserved for definition by IEEE 802.1
recommend to not use zero unless
absolutely needed.
none(1) No format specified, usually because
there is not (yet) a Maintenance
Domain Name. In this case, a zero
length OCTET STRING for the Domain
Name field is acceptable.
dnsLikeName(2) Domain Name like string, globally unique
text string derived from a DNS name.
macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
charString(4) RFC2579 DisplayString, except that the
character codes 0-31 (decimal) are not
used.
ieeeReserved(xx) Reserved for definition by IEEE 802.1
xx values can be [5..31] and [64..255]
ituReserved(xx) Reserved for definition by ITU-T Y.1731
xx values range from [32..63]
To support future extensions, the Dot1agCfmMaintDomainNameType
textual convention SHOULD NOT be sub-typed in object type
definitions. It MAY be sub-typed in compliance statements in
order to require only a subset of these address types for a
compliant implementation.
Implementations must ensure that Dot1agCfmMaintDomainNameType
objects and any dependent objects (e.g.,
Dot1agCfmMaintDomainName objects) are consistent. An
inconsistentValue error must be generated if an attempt to
change an Dot1agCfmMaintDomainNameType object would, for
example, lead to an undefined Dot1agCfmMaintDomainName value.
In particular,
Dot1agCfmMaintDomainNameType/Dot1agCfmMaintDomainName pairs
must be changed together if the nameType changes.
Dot1agCfmMepDefects Bits

bDefErrorCCM(3) bDefMACstatus(1) bDefRDICCM(0) bDefRemoteCCM(2) bDefXconCCM(4)

A MEP can detect and report a number of defects, and multiple
defects can be present at the same time. These defects are:
bDefRDICCM(0) A remote MEP is reported the RDI bit in its
last CCM.
bDefMACstatus(1) Either some remote MEP is reporting its
Interface Status TLV as not isUp, or all remote
MEPs are reporting a Port Status TLV that
contains some value other than psUp.
bDefRemoteCCM(2) The MEP is not receiving valid CCMs from at
least one of the remote MEPs.
bDefErrorCCM(3) The MEP has received at least one invalid CCM
whose CCM Interval has not yet timed out.
bDefXconCCM(4) The MEP has received at least one CCM from
either another MAID or a lower MD Level whose
CCM Interval has not yet timed out.
Dot1agCfmMepId Unsigned32 (1..8191)

Display hint: d

Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
Dot1agCfmMepIdOrZero Unsigned32 (0 | 1..8191)

Display hint: d

Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP.
The special value 0 is allowed to indicate special cases, for
example that no MEPID is configured.
Whenever an object is defined with this SYNTAX, then the
DESCRIPTION clause of such an object MUST specify what the
special value of 0 means.
Dot1agCfmMhfCreation INTEGER

defMHFdefault(2) defMHFdefer(4) defMHFexplicit(3) defMHFnone(1)

Indicates if the Management Entity can create MHFs.
The valid values are:
defMHFnone(1) No MHFs can be created for this VID.
defMHFdefault(2) MHFs can be created on this VID on any
Bridge port through which this VID can
pass.
defMHFexplicit(3) MHFs can be created for this VID only on
Bridge ports through which this VID can
pass, and only if a MEP is created at some
lower MD Level.
defMHFdefer(4) The creation of MHFs is determined by the
corresponding Maintenance Domain variable
(dot1agCfmMaMhfCreation).
Dot1agCfmMpDirection INTEGER

down(1) up(2)

Indicates the direction in which the Maintenance
association (MEP or MIP) faces on the bridge port:
down(1) Sends Continuity Check Messages away from the
MAC Relay Entity.
up(2) Sends Continuity Check Messages towards the
MAC Relay Entity.
Dot1agCfmPortStatus INTEGER

psBlocked(1) psNoPortStateTLV(0) psUp(2)

An enumerated value from he Port Status TLV from the last CCM
received from the last MEP. It indicates the ability of the
Bridge Port on which the transmitting MEP resides to pass
ordinary data, regardless of the status of the MAC
(Table 21-10).
psNoPortStateTLV(0) Indicates either that no CCM has been
received or that no port status TLV was
present in the last CCM received.
psBlocked(1) Ordinary data cannot pass freely through
the port on which the remote MEP resides.
Value of enableRmepDefect is equal to
false.
psUp(2): Ordinary data can pass freely through
the port on which the remote MEP resides.
Value of enableRmepDefect is equal to
true.
NOTE: A 0 value is used for psNoPortStateTLV, so that
additional code points can be added in a manner
consistent with the Dot1agCfmInterfaceStatus textual
convention.
Dot1agCfmRelayActionFieldValue INTEGER

rlyFdb(2) rlyHit(1) rlyMpdb(3)

Possible values the Relay action field can take.
Dot1agCfmRemoteMepState INTEGER

rMepFailed(3) rMepIdle(1) rMepOk(4) rMepStart(2)

Operational state of the remote MEP state machine. This
state machine monitors the reception of valid CCMs from a
remote MEP with a specific MEPID. It uses a timer that
expires in 3.5 times the length of time indicated by the
dot1agCfmMaCcmInterval object.
rMepIdle(1) Momentary state during reset.
rMepStart(2) The timer has not expired since the
state machine was reset, and no valid
CCM has yet been received.
rMepFailed(3) The timer has expired, both since the
state machine was reset, and since a
valid CCM was received.
rMepOk(4) The timer has not expired since a
valid CCM was received.

Used by