IEC-62439-2-MIB
Other65c-62439-2:2021/COR1:2023 Copyright (C) IEC. This version of this MIB module is part of 65c-62439-2:2021/COR1:2023; see 65c-62439-2:2021 for full legal notices. This MIB module defines the Network Management interfaces for the Redundancy Protocols defined by the IEC 62439 suite. This MIB exposes the IEC62439-2 objects (MRP). These definitions specify the monitoring and management variant of an SNMP entity. If the SNMP entity only contains monitoring functionality, then IEC 62439 monitoring MIB definitions shall be used instead of this MIB module. An entity may support either the monitoring facet only or the management facet including the monitoring facet as a subset.
snmptranslate -m IEC-62439-2-MIB -Tpsnmpwalk -v2c -c <community> -m IEC-62439-2-MIB <host> 1.0.62439Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Iiec62439 | 1.0.62439 | |||
identity 65c-62439-2:2021/COR1:2023 Copyright (C) IEC. This version of this MIB module is part of 65c-62439-2:2021/COR1:2023; see 65c-62439-2:2021 for full legal notices. This MIB module defines the Network Management interfaces for the Redundancy Protocols defined by the IEC 62439 suite. This MIB exposes the IEC62439-2 objects (MRP). These definitions specify the monitoring and management variant of an SNMP entity. If the SNMP entity only contains monitoring functionality, then IEC 62439 monitoring MIB definitions shall be used instead of this MIB module. An entity may support either the monitoring facet only or the management facet including the monitoring facet as a subset. | ||||
| Nmrp | 1.0.62439.1 | |||
| NmrpObjects | 1.0.62439.1.1 | |||
| TmrpDomainTable | 1.0.62439.1.1.1 | NA | ||
table · not-accessible · current Every entry in this table contains information about a Media Redundancy Protocol (MRP) domain. Row entries can be created or deleted via SNMP operations. Therefore the MAX-ACCESS values of some Object Identifier are different from the values of the same Object Identifier in the pure monitoring facet. | ||||
| RmrpDomainEntry | 1.0.62439.1.1.1.1 | NA | ||
| CmrpDomainIndex | 1.0.62439.1.1.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index of the entry | ||||
| CmrpDomainID | 1.0.62439.1.1.1.1.2 | IEC62439UuidType | RC | |
column · IEC62439UuidType · read-create · current Universally unique identifier belongs to the MRP domain which represents a ring. | ||||
| CmrpDomainName | 1.0.62439.1.1.1.1.3 | DisplayString | RC | |
column · DisplayString · read-create · current A logical name for the MRP domain to ease the management of MRP domains. | ||||
| CmrpDomainAdminRole | 1.0.62439.1.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Control the MRP behavior of the system per domain. If the value is set to disable(0), the MRP entity of this domain shall be disabled. If the value is set to client(1), the entity shall be set to the role of a Media Redundancy Client (MRC). If the value is set to manager(2), the entity shall be set to the role of a Media Redundancy Manager (MRM). If the value is set to managerAutoComp(3), the entity shall be set to the role of a Media Redundancy Manager Auto (MRA) complying with Annex A. If the value is set to managerAuto(4), the entity shall be set to the role of a Media Redundancy Manager Auto (MRA) not supporting Annex A. The factory settings are recommended to adjust the value of this object to the client(1) capability of the component, or, if supported, to the managerAutoComp(3) or managerAuto(4) capability, in order to prevent multiple managers are in ring (the order of the capabilities are not necessarily conform to the order of the object values here). If the agent restricts the write access, no matter what reason, it shall reject write requests by responding with 'badValue'.
| ||||
| CmrpDomainOperRole | 1.0.62439.1.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current The operational role of an MRP entity per domain. A value of disabled(0) signals that the entity doesn't work (for whatever reason). A value of client(1) signals that the entity is in a client role. A value of manager(2) signals that the entity is the manager of this MRP domain. A value of managerAutoComp(3) signals that the entity is in automanager role complying with Annex A. A value of managerAuto(4) signals that the entity is in automanager role not supporting Annex A.
| ||||
| CmrpDomainRingPort1 | 1.0.62439.1.1.1.1.6 | Integer32 | RC | |
column · Integer32 · read-create · current The ifIndex of the layer 2 interface which is used as ring port 1. | ||||
| CmrpDomainRingPort1State | 1.0.62439.1.1.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Operational state of the first Ring-Port.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frames are dropped except
- MRP topology change frames and MRP test frames from
a MRM,
- MRP link change frames from an MRC,
- MRP Interconnection topology change from a MIM,
- MRP Interconnection link change from a MIC,
- frames from other protocols that also define to pass
blocked(2) ports.
forwarding(3) indicates that all frames are passed through
in accordance with the forwarding behavior
of IEEE 802.1Q.
not-connected(4) indicates that the port has no link.
| ||||
| CmrpDomainRingPort2 | 1.0.62439.1.1.1.1.8 | Integer32 | RC | |
column · Integer32 · read-create · current The ifIndex of the layer 2 interface, which is used as ring port 2. | ||||
| CmrpDomainRingPort2State | 1.0.62439.1.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Operational state of the second Ring-Port.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frames are dropped except
- MRP topology change frames and MRP test frames from
a MRM,
- MRP link change frames from an MRC,
- MRP Interconnection topology change from a MIM,
- MRP Interconnection link change from a MIC,
- frames from other protocols that also define to pass
blocked(2) ports.
forwarding(3) indicates that all frames are passed through
in accordance with the forwarding behavior
of IEEE 802.1Q.
not-connected(4) indicates that the port has no link.
| ||||
| CmrpDomainState | 1.0.62439.1.1.1.1.10 | Bits | RO | |
column · Bits · read-only · current Operational status of the MRP entity.
disabled(0) - MRP switched off. All higher bits are invalid
and shall be reset.
undefined(1) - Value is not valid.
All higher bits are invalid and shall be reset.
ringOpen(2) - MRP ring redundancy lost
All higher bits are invalid and shall be reset.
reserved(3) - reserved for further extensions.
| ||||
| CmrpDomainError | 1.0.62439.1.1.1.1.11 | Bits | RO | |
column · Bits · read-only · current If the device couldn't switch to the desired administrative state
(thus the value of 'mrpDomainState' is not the expected one),
this value provides the reason. Otherwise, the bit noError(0) is set.
noError(0) - the operational state of the device is confom
to administrative state.
All higher bits are invalid and shall be reset.
invalidVlanId(1) - the assigned VLAN ID is not permitted .
invalid (2) - Value is not valid.
All higher bits are invalid and shall be reset.
multipleMRM(3) - multiple active managers in ring domain.
singleSideReceive(4) - the test frames of an MRM
have been seen, but only on one port.
| ||||
| CmrpDomainBlocked | 1.0.62439.1.1.1.1.12 | INTEGER | RO | |
column · INTEGER · read-only · current The entity supports blocked ring ports.
Shows whether an MRP domain requires the support of the
BLOCKED port state at ring ports.
The manager of an MRP domain decides whether this support
is required.
Set to enabled, the manager demands that all clients
shall support the blocked attribute also set to enabled.
If mrpDomainBlocked is set disabled at the manager,
then the value of mrpDomainBlocked can be arbitrary
at the clients.
enabled(1) client: supports ring ports whose port state can be
blocked.
manager: works only with clients supporting blocked
ring ports.
disabled(2) client: no support of blocked ring ports.
manager: Work with clients supporting blocked ring
ports and with clients not supporting
blocked ring ports.
| ||||
| CmrpDomainVlanId | 1.0.62439.1.1.1.1.13 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The VLAN ID assigned to the MRP protocol. The VLAN ID only is in use when the bit invalidVlanId is not set in mrpDomainError. If value is set to 0 no VLAN is assigned. The invalidVlanId shall be set to 0 (no Error). | ||||
| CmrpDomainManagerPriority | 1.0.62439.1.1.1.1.14 | INTEGER (0..65535) | RC | |
column · INTEGER (0..65535) · read-create · current The priority of this MRP entity. If the device is client only, the value of this object shall be ignored by the MRP entity. Only the four most significant bits shall be used, the bits 0 to 11 are reserved. The smaller value has the higher priority. | ||||
| CmrpDomainRingOpenCount | 1.0.62439.1.1.1.1.15 | Counter32 | RO | |
column · Counter32 · read-only · current Counter for ring-state changes to open. | ||||
| CmrpDomainLastRingOpenChange | 1.0.62439.1.1.1.1.16 | TimeTicks | RO | |
column · TimeTicks · read-only · current Timeticks since last change of ring-state to ring open. | ||||
| CmrpDomainRoundTripDelayMax | 1.0.62439.1.1.1.1.17 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The maximum Round-Trip-Delay (in milliseconds) that was measured since startup.
| ||||
| CmrpDomainRoundTripDelayMin | 1.0.62439.1.1.1.1.18 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The minimum Round-Trip-Delay (in milliseconds) that was measured since startup.
| ||||
| CmrpDomainResetRoundTripDelays | 1.0.62439.1.1.1.1.19 | INTEGER | RW | |
column · INTEGER · read-write · current A write request with resetDelays(1) shall reset the values of mrpDomainRoundTripDelayMax and mrpDomainRoundTripDelayMin to zero at the same time.
| ||||
| CmrpDomainMRMReactOnLinkChange | 1.0.62439.1.1.1.1.20 | INTEGER | RC | |
column · INTEGER · read-create · current Tells whether the MRM reacts on link down MRP link change
frames.
enabled(1) indicates that the MRM reacts immediately on link down MRP
link change frames.
disabled(2) indicates that the MRM does not react on
link down MRP link change frames.
| ||||
| CmrpDomainRowStatus | 1.0.62439.1.1.1.1.21 | RowStatus | RC | |
column · RowStatus · read-create · current Support of creation and deletion of rows. A row can be taken out of service by writing the value notInService(2). | ||||
| TmrpInterconnectionTable | 1.0.62439.1.1.2 | NA | ||
table · not-accessible · current Every entry in this table contains information about a Media redundancy Interconnection domain. Row entries can be created or deleted via SNMP operations. Therefore the MAX-ACCESS values of some Object Identifier are different from the values of the same Object Identifier in the pure monitoring facet. | ||||
| RmrpInterconnectionEntry | 1.0.62439.1.1.2.1 | NA | ||
| CmrpInterconnectionID | 1.0.62439.1.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current The index of the entry | ||||
| CmrpInterconnectionName | 1.0.62439.1.1.2.1.2 | DisplayString | RC | |
column · DisplayString · read-create · current A logical name for the Media redundancy Interconnection domain to ease the management of Media redundancy Interconnection domains. | ||||
| CmrpInterconnectionPort | 1.0.62439.1.1.2.1.3 | Integer32 | RC | |
column · Integer32 · read-create · current The ifIndex of the layer 2 interface, which is used as an interconnection port. | ||||
| CmrpInterconnectionPortState | 1.0.62439.1.1.2.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Operational state of the Interconnection port.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frames are dropped except
- MRP Interconnection topology change frames,
- MRP Interconnection test frames,
- MRP Interconnection link change frames,
- MRP Interconnection link status poll frames,
- frames from other protocols that also define to pass
blocked(2) ports.
forwarding(3) indicates that all frames are passed through
in accordance with the forwarding behavior of IEEE 802.1Q.
notConnected(4) indicates that the port has no link.
| ||||
| CmrpInterconnectionVlanId | 1.0.62439.1.1.2.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The VLAN ID assigned to the MRP Interconnection protocol. The VLAN ID only is in use when mrpInterconnectionError does not signal invalidVlanId. If value is set to 0 no VLAN is assigned. | ||||
| CmrpInterconnectionMode | 1.0.62439.1.1.2.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current Control the MRP Interconnection mode.
The value undefined(1) signals that the interconnection mode is
neither set to lcMode(2) nor to rcMode(3).
If the value is set to lcMode(2), the device in Media redundancy
Interconnection Manager (MIM) role is using the link check mode to
detect open or closed interconnection links.
If the value is set to rcMode(3), the device in Media redundancy
Interconnection Manager (MIM) role is using the ring check mode to
detect open or closed interconnection links.
The factory settings are recommended to adjust the
value of this object to the lcMode(2) capability.
If the agent restricts the write access, no matter what
reason, it shall reject write requests by responding
with 'badValue'.
| ||||
| CmrpInterconnectionAdminRole | 1.0.62439.1.1.2.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Control the MRP Interconnection behavior of the system per Media redundancy Interconnection domain. If the value is set to disable(0), the MRP Interconnection entity of this domain shall be disabled. If the value is set to client(1), the entity shall be set to the role of a Media redundancy Interconnection Client (MIC). If the value is set to manager(2), the entity shall be set to the role of a Media redundancy Interconnection Manager (MIM). The factory settings are recommended to adjust the value of this object to the client(1), capability of the component in order to prevent multiple managers are in the interconnection (the order of the capabilities are not necessarily conform to the order of the object values here). If the agent restricts the write access, no matter what reason, it shall reject write requests by responding with 'badValue'.
| ||||
| CmrpInterconnectionOperRole | 1.0.62439.1.1.2.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current The operational role of an MRP Interconnection entity per Media redundancy Interconnection domain. A value of disabled(0) signals that the entity doesn't work (whatever reason). A value of client(1) signals that the entity is in a Media redundancy Interconnection Client role. A value of manager(2) signals that the entity is the manager of this Media redundancy Interconnection domain.
| ||||
| CmrpInterconnectionState | 1.0.62439.1.1.2.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Operational status of the MRP Interconnection entity.
disable(0) - The entity is disabled.
undefined(1) - Value is not valid.
interconnOpen(2) - MRP Interconnection redundancy lost of this Media
redundancy Interconnection domain.
interconnClosed(3) - MRP Interconnection redundancy available of this Media
redundancy Interconnection domain.
| ||||
| CmrpInterconnectionError | 1.0.62439.1.1.2.1.10 | Bits | RO | |
column · Bits · read-only · current Configuration status of the MRP Interconnection entity. noError(0) - no configuration error detected. invalidVlanId(1) - the assigned VLAN ID is not permitted.
| ||||
| CmrpInterconnectionOpenCount | 1.0.62439.1.1.2.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current Counter for MRP Interconnection state changes to interconnOpen. | ||||
| CmrpInterconnectionLastOpenChange | 1.0.62439.1.1.2.1.12 | TimeTicks | RO | |
column · TimeTicks · read-only · current Timeticks since last change of mrpInterconnectionState to interconnOpen. | ||||
| CmrpInterconnectionPeerMAC | 1.0.62439.1.1.2.1.13 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Device-MAC-Address of the devices interconnection peer, connected to the devices interlink port. This variable contains the MAC-Address contained in the media link check frame received at the interconnection port. | ||||
| CmrpInterconnectionOwnMRMMAC | 1.0.62439.1.1.2.1.14 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current The device-MAC-Address of the devices ring manager (MRM). This variable contains the MAC-Address extracted from the periodically received MRP_Test frame sent by the ring manager. If the ring managers MAC-Address is not known, the variable shall contain ff-ff-ff-ff-ff-ff. | ||||
| CmrpInterconnectionPeerMRMMAC | 1.0.62439.1.1.2.1.15 | OCTET STRING | RO | |
column · OCTET STRING · read-only · current Device-MAC-Address of devices interconnection peer's, connected to the devices interlink port, ring manager. This variable contains the MRM-MAC-Address of the peers ring Manager if known. If the ring managers MAC-Address is not known, the variable shall contain ff-ff-ff-ff-ff-ff. | ||||
| CmrpInterconnectionPeerRingDomainUUID | 1.0.62439.1.1.2.1.16 | IEC62439UuidType | RO | |
column · IEC62439UuidType · read-only · current The domain UUID of the ring the interconnection peer's, connected to the devices interlink port, ring. This variable contains the MRM_DomainUUID of the peers ring contained in the frames received at the interconnection port. | ||||
| CmrpInterconnectionRowStatus | 1.0.62439.1.1.2.1.17 | RowStatus | RC | |
column · RowStatus · read-create · current Support of creation and deletion of rows. A row can be taken out of service by writing the value notInService(2). | ||||
| TmrpInterconnectionXTable | 1.0.62439.1.1.3 | NA | ||
table · not-accessible · current Every entry in this table contains information about a Media redundancy Interconnection domain. Row entries can be created or deleted via SNMP operations. Therefore, the MAX-ACCESS values of some Object Identifiers are different from the values of the same Object Identifiers in the pure monitoring facet. | ||||
| RmrpInterconnectionXEntry | 1.0.62439.1.1.3.1 | NA | ||
row · not-accessible · current An entry in the mrpInterconnectionTable.
| ||||
| CmrpInterconnectionAdminMICPosition | 1.0.62439.1.1.3.1.1 | INTEGER | RW | |
column · INTEGER · read-write · current Controls the MRP Interconnection Client position in the interconnection setup. If the value is set to primary(0), the MRP Interconnection Client is a primary MRP Interconnection Client. If the value is set to secondary(1), the MRP Interconnection Client is a secondary MRP Interconnection Client. (Default: primary(0))
| ||||
| CmrpInterconnectionOperMICPosition | 1.0.62439.1.1.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Reads the MRP Interconnection Client position in the interconnection setup. If the value is set to primary(0), the MRP Interconnection Client is a primary MRP Interconnection Client. If the value is set to secondary(1), the MRP Interconnection Client is a secondary MRP Interconnection Client. (Default: primary(0))
| ||||
| NmrpNotifications | 1.0.62439.1.2 | |||
| NmrpConformance | 1.0.62439.1.3 | |||
| NmrpRedundancyGroups | 1.0.62439.1.3.1 | |||
| GmrpDomainBasicGroup | 1.0.62439.1.3.1.1 | |||
group · current Parameters that are necessary for monitoring and controlling the status of MRP domains. | ||||
| GmrpDomainManagerGroup | 1.0.62439.1.3.1.2 | |||
group · current Parameters, which are additional, to monitor and control the status of MRP domain managers.
| ||||
| GmrpDomainBlockingCntrlGroup | 1.0.62439.1.3.1.3 | |||
group · current Parameters, which are optional, to monitor and control blocking behavior of MRP domains. | ||||
| GmrpDomainDiagGroup | 1.0.62439.1.3.1.4 | |||
group · current Parameters, which are optional, to monitor and control the diagnostic status of MRP domains. | ||||
| GmrpDomainAdvancedGroup | 1.0.62439.1.3.1.5 | |||
group · current Parameters, which are optional, to monitor and control the status of MRP domains.
| ||||
| GmrpInterconnectionBasicGroup | 1.0.62439.1.3.1.6 | |||
group · current Parameters, which are necessary, to monitor and control the status of Media redundancy Interconnection domains. | ||||
| GmrpInterconnectionDiagGroup | 1.0.62439.1.3.1.7 | |||
group · current Parameters, which are optional, to monitor and control the diagnostic status of Media redundancy Interconnection domains. | ||||
| GmrpInterconnectionAdvancedGroup | 1.0.62439.1.3.1.8 | |||
group · current Parameters, which are optional, to monitor and control the status of Media redundancy Interconnection domains.
| ||||
| NmrpRedundancyCompliances | 1.0.62439.1.3.2 | |||
| MmrpDomainBasicCompliance | 1.0.62439.1.3.2.1 | |||
compliance · current Basic implementation requirements for MRP support. The agent shall support the monitoring and control of redundancy domains. | ||||
| MmrpDomainManagerCompliance | 1.0.62439.1.3.2.2 | |||
compliance · current Manager implementation requirements for MRP support. The agent shall support the monitoring and control of redundancy domains. | ||||
| MmrpInterconnectionCompliance | 1.0.62439.1.3.2.3 | |||
compliance · current Implementation requirements for MRP Interconnection support. The agent shall support the monitoring and control of Media redundancy Interconnection domains. | ||||
| Nprp | 1.0.62439.2 | |||
| Ncrp | 1.0.62439.3 | |||
| Nbrp | 1.0.62439.4 | |||
Textual conventions
IEC62439UuidTypeOCTET STRING (SIZE (16))The IEC 61158-5-10 defines the structure of the UUID as a data type numeric identifier 1025.
Groups and compliance
Used by
- TN-MRP-MIB (transition)