MIB Browser

IANA-BFD-TC-STD-MIB

Standards (IETF)
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code.  All rights reserved.

Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
Organization
IANA
Root OID
1.3.6.1.2.1.224
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m IANA-BFD-TC-STD-MIB -Tp
snmpwalk -v2c -c <community> -m IANA-BFD-TC-STD-MIB <host> 1.3.6.1.2.1.224

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
IianaBfdTCStdMib1.3.6.1.2.1.224

Textual conventions

IANAbfdDiagTC INTEGER

administrativelyDown(7) concatenatedPathDown(6) controlDetectionTimeExpired(1) echoFunctionFailed(2) forwardingPlaneReset(4) misConnectivityDefect(9) neighborSignaledSessionDown(3) noDiagnostic(0) pathDown(5) reverseConcatenatedPathDown(8)

A common BFD diagnostic code.
IANAbfdSessAuthenticationKeyTC OCTET STRING (SIZE (0..252))

Display hint: 1x

BFD authentication key type.

An IANAbfdSessAuthenticationKeyTC is always interpreted
within the context of an IANAbfdSessAuthenticationTypeTC
value.  Every usage of the IANAbfdSessAuthenticationTypeTC
textual convention is required to specify the
IANAbfdSessAuthenticationKeyTC object that provides the
context.  It is suggested that the
IANAbfdSessAuthenticationKeyTC object be logically registered
before the object(s) that use the
IANAbfdSessAuthenticationKeyTC textual convention, if they
appear in the same logical row.

The value of an IANAbfdSessAuthenticationKeyTC must
always be consistent with the value of the associated
IANAbfdSessAuthenticationTypeTC object.  Attempts to set an
IANAbfdSessAuthenticationKeyTC object to a value inconsistent
with the associated IANAbfdSessAuthenticationTypeTC must fail
with an inconsistentValue error.

The following size constraints for an
IANAbfdSessAuthenticationKeyTC object are defined for the
associated IANAbfdSessAuthenticationTypeTC values show below:

noAuthentication(-1): SIZE(0)
reserved(0): SIZE(0)
simplePassword(1): SIZE(1..16)
keyedMD5(2): SIZE(16)
meticulousKeyedMD5(3): SIZE(16)
keyedSHA1(4): SIZE(20)
meticulousKeyedSHA1(5): SIZE(20)
null(6): SIZE(0)
optimizedMD5MeticulousKeyedISAACAuthentication(7): SIZE(8..128)
optimizedSHA1MeticulousKeyedISAACAuthentication(8): SIZE(8..128)

When this textual convention is used as the syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, STD 58.  In this case,
the object definition MUST include a 'SIZE' clause to limit
the number of potential instance sub-identifiers; otherwise,
the applicable constraints MUST be stated in the appropriate
conceptual row DESCRIPTION clauses, or in the surrounding
documentation if there is no single DESCRIPTION clause that
is appropriate.
IANAbfdSessAuthenticationTypeTC INTEGER

keyedMD5(2) keyedSHA1(4) meticulousKeyedMD5(3) meticulousKeyedSHA1(5) noAuthentication(-1) null(6) optimizedMD5MeticulousKeyedISAACAuthentication(7) optimizedSHA1MeticulousKeyedISAACAuthentication(8) reserved(0) simplePassword(1)

BFD authentication type
IANAbfdSessOperModeTC INTEGER

asyncModeWEchoFunction(1) asynchModeWOEchoFunction(2) demandModeWEchoFunction(3) demandModeWOEchoFunction(4)

BFD session operating mode
IANAbfdSessStateTC INTEGER

adminDown(1) down(2) failing(5) init(3) up(4)

BFD session state.  State failing(5) is only applicable if
corresponding session is running in BFD version 0.
IANAbfdSessTypeTC INTEGER

multiHopOutOfBandSignaling(3) multiHopTotallyArbitraryPaths(2) multiHopUnidirectionalLinks(4) singleHop(1)

BFD session type

Used by