HDSL2-SHDSL-LINE-MIB
Standards (IETF)This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2 (for SHDSL lines). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4319; see the RFC itself for full legal notices.
snmptranslate -m HDSL2-SHDSL-LINE-MIB -Tpsnmpwalk -v2c -c <community> -m HDSL2-SHDSL-LINE-MIB <host> 1.3.6.1.2.1.10.48Imports
| IF-MIB | ifIndex |
|---|---|
| PerfHist-TC-MIB | PerfCurrentCount, PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, transmission |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ihdsl2ShdslMIB | 1.3.6.1.2.1.10.48 | ||||||||||||||||||||
identity This MIB module defines a collection of objects for managing HDSL2/SHDSL lines. An agent may reside at either end of the line; however, the MIB module is designed to require no management communication between the modems beyond that inherent in the low-level EOC line protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2 (for SHDSL lines). Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4319; see the RFC itself for full legal notices. | |||||||||||||||||||||
| Nhdsl2ShdslNotifications | 1.3.6.1.2.1.10.48.0 | ||||||||||||||||||||
| !hdsl2ShdslLoopAttenCrossing | 1.3.6.1.2.1.10.48.0.1 | ||||||||||||||||||||
notification · current This notification indicates that the loop attenuation threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslSNRMarginCrossing | 1.3.6.1.2.1.10.48.0.2 | ||||||||||||||||||||
notification · current This notification indicates that the SNR margin threshold (as per the hdsl2ShdslEndpointThreshSNRMargin value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslPerfESThresh | 1.3.6.1.2.1.10.48.0.3 | ||||||||||||||||||||
notification · current This notification indicates that the errored seconds threshold (as per the hdsl2ShdslEndpointThreshES value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslPerfSESThresh | 1.3.6.1.2.1.10.48.0.4 | ||||||||||||||||||||
notification · current This notification indicates that the severely errored seconds threshold (as per the hdsl2ShdslEndpointThreshSES value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslPerfCRCanomaliesThresh | 1.3.6.1.2.1.10.48.0.5 | ||||||||||||||||||||
notification · current This notification indicates that the CRC anomalies threshold (as per the hdsl2ShdslEndpointThreshCRCanomalies value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslPerfLOSWSThresh | 1.3.6.1.2.1.10.48.0.6 | ||||||||||||||||||||
notification · current This notification indicates that the LOSW Seconds threshold (as per the hdsl2ShdslEndpointThreshLOSWS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslPerfUASThresh | 1.3.6.1.2.1.10.48.0.7 | ||||||||||||||||||||
notification · current This notification indicates that the unavailable seconds threshold (as per the hdsl2ShdslEndpointThreshUAS value) has been reached/exceeded for the HDSL2/SHDSL segment endpoint. | |||||||||||||||||||||
| !hdsl2ShdslSpanInvalidNumRepeaters | 1.3.6.1.2.1.10.48.0.8 | ||||||||||||||||||||
notification · current This notification indicates that a mismatch has been detected between the number of repeater/regenerator units configured for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters object and the actual number of repeater/regenerator units discovered via the EOC. | |||||||||||||||||||||
| !hdsl2ShdslLoopbackFailure | 1.3.6.1.2.1.10.48.0.9 | ||||||||||||||||||||
notification · current This notification indicates that an endpoint maintenance loopback command failed for an HDSL2/SHDSL segment. | |||||||||||||||||||||
| !hdsl2ShdslpowerBackoff | 1.3.6.1.2.1.10.48.0.10 | ||||||||||||||||||||
notification · current This notification indicates that the bit setting for powerBackoff in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
| |||||||||||||||||||||
| !hdsl2ShdsldeviceFault | 1.3.6.1.2.1.10.48.0.11 | ||||||||||||||||||||
notification · current This notification indicates that the bit setting for deviceFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
| |||||||||||||||||||||
| !hdsl2ShdsldcContinuityFault | 1.3.6.1.2.1.10.48.0.12 | ||||||||||||||||||||
notification · current This notification indicates that the bit setting for dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
| |||||||||||||||||||||
| !hdsl2ShdslconfigInitFailure | 1.3.6.1.2.1.10.48.0.13 | ||||||||||||||||||||
notification · current This notification indicates that the bit setting for configInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
| |||||||||||||||||||||
| !hdsl2ShdslprotocolInitFailure | 1.3.6.1.2.1.10.48.0.14 | ||||||||||||||||||||
notification · current This notification indicates that the bit setting for protocolInitFailure in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
| |||||||||||||||||||||
| !hdsl2ShdslnoNeighborPresent | 1.3.6.1.2.1.10.48.0.15 | ||||||||||||||||||||
notification · current This notification indicates that the bit setting for noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object for this endpoint has changed.
| |||||||||||||||||||||
| !hdsl2ShdslLocalPowerLoss | 1.3.6.1.2.1.10.48.0.16 | ||||||||||||||||||||
notification · current This notification indicates impending unit failure due to loss of local power (last gasp).
| |||||||||||||||||||||
| Nhdsl2ShdslMibObjects | 1.3.6.1.2.1.10.48.1 | ||||||||||||||||||||
| Thdsl2ShdslSpanConfTable | 1.3.6.1.2.1.10.48.1.1 | NA | |||||||||||||||||||
table · not-accessible · current This table supports overall configuration of HDSL2/SHDSL spans. Entries in this table MUST be maintained in a persistent manner. | |||||||||||||||||||||
| Rhdsl2ShdslSpanConfEntry | 1.3.6.1.2.1.10.48.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslSpanConfTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfNumRepeaters | 1.3.6.1.2.1.10.48.1.1.1.1 | Unsigned32 (0..8) | RW | ||||||||||||||||||
column · Unsigned32 (0..8) · read-write · current This object provisions the number of repeaters/regenerators in this HDSL2/SHDSL span.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfProfile | 1.3.6.1.2.1.10.48.1.1.1.2 | SnmpAdminString (SIZE (1..32)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-write · current This object is a pointer to a span configuration profile in the hdsl2ShdslSpanConfProfileTable, which applies to this span. The value of this object is the index of the referenced profile in the hdsl2ShdslSpanConfProfileTable. Note that span configuration profiles are only applicable to SHDSL lines. HDSL2 lines MUST reference the default profile, 'DEFVAL'. By default, this object will have the value 'DEFVAL' (the index of the default profile). Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslSpanConfProfileTable, MUST be rejected. | |||||||||||||||||||||
| Chdsl2ShdslSpanConfAlarmProfile | 1.3.6.1.2.1.10.48.1.1.1.3 | SnmpAdminString (SIZE (1..32)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-write · current This object is a pointer to an alarm configuration profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable. The alarm threshold configuration in the referenced profile will be used by default for all segment endpoints in this span. Individual endpoints may override this profile by explicitly specifying some other profile in the hdsl2ShdslEndpointConfTable. By default, this object will have the value 'DEFVAL' (the index of the default profile). Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected. | |||||||||||||||||||||
| Thdsl2ShdslSpanStatusTable | 1.3.6.1.2.1.10.48.1.2 | NA | |||||||||||||||||||
table · not-accessible · current This table provides overall status information of HDSL2/SHDSL spans. This table contains live data from equipment. As such, it is NOT persistent. | |||||||||||||||||||||
| Rhdsl2ShdslSpanStatusEntry | 1.3.6.1.2.1.10.48.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslSpanStatusTable. Each entry represents the complete span in a single HDSL2/SHDSL line. It is indexed by the ifIndex of the associated HDSL2/SHDSL line.
| |||||||||||||||||||||
| Chdsl2ShdslStatusNumAvailRepeaters | 1.3.6.1.2.1.10.48.1.2.1.1 | Unsigned32 (0..8) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..8) · read-only · current Contains the actual number of repeaters/regenerators discovered in this HDSL2/SHDSL span. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslStatusMaxAttainableLineRate | 1.3.6.1.2.1.10.48.1.2.1.2 | Unsigned32 (0..4294967295) | RO | 5696000 | |||||||||||||||||
column · Unsigned32 (0..4294967295) · read-only · current Contains the maximum attainable line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. This rate includes payload (user data) and any applicable framing overhead.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslStatusActualLineRate | 1.3.6.1.2.1.10.48.1.2.1.3 | Unsigned32 (0..4294967295) | RO | 5696000 | |||||||||||||||||
column · Unsigned32 (0..4294967295) · read-only · current Contains the actual line rate in this HDSL2/SHDSL span. This SHOULD equal ifSpeed. This rate includes payload (user data) and any applicable framing overhead
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslStatusTransmissionModeCurrent | 1.3.6.1.2.1.10.48.1.2.1.4 | Hdsl2ShdslTransmissionModeType | RO | 80 0 | |||||||||||||||||
column · Hdsl2ShdslTransmissionModeType · read-only · current Contains the current Power Spectral Density (PSD) regional setting of the HDSL2/SHDSL span. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslStatusMaxAttainablePayloadRate | 1.3.6.1.2.1.10.48.1.2.1.5 | Unsigned32 (0..4294967295) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..4294967295) · read-only · current Contains the maximum attainable payload (user data) line rate in this HDSL2/SHDSL span. This object provides the maximum rate the line is capable of achieving. This is based upon measurements made during line probing. Any framing overhead is not included.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslStatusActualPayloadRate | 1.3.6.1.2.1.10.48.1.2.1.6 | Unsigned32 (0..4294967295) | RO | 0 | |||||||||||||||||
column · Unsigned32 (0..4294967295) · read-only · current Contains the actual line rate in this HDSL2/SHDSL span. Any framing overhead is not included.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Thdsl2ShdslInventoryTable | 1.3.6.1.2.1.10.48.1.3 | NA | |||||||||||||||||||
table · not-accessible · current This table supports retrieval of unit inventory information
available via the EOC from units in an HDSL2/SHDSL line.
Entries in this table are dynamically created during the
line discovery process. The life cycle for these entries
is as follows:
- xtu discovers a device, either a far-end xtu or an xru
- an inventory table entry is created for the device
- the line goes down for whatever reason
- inventory table entries for unreachable devices are
destroyed
As these entries are created/destroyed dynamically, they
are NOT persistent. | |||||||||||||||||||||
| Rhdsl2ShdslInventoryEntry | 1.3.6.1.2.1.10.48.1.3.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslInventoryTable. Each entry represents inventory information for a single unit in an HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the associated unit.
| |||||||||||||||||||||
| Chdsl2ShdslInvIndex | 1.3.6.1.2.1.10.48.1.3.1.1 | Hdsl2ShdslUnitId | NA | ||||||||||||||||||
column · Hdsl2ShdslUnitId · not-accessible · current Each entry in this table corresponds to a physical element in an HDSL2/SHDSL span. It is based on the EOC unit addressing scheme with reference to the xtuC. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorID | 1.3.6.1.2.1.10.48.1.3.1.2 | OCTET STRING (SIZE (8)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (8)) · read-only · current Vendor ID as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorModelNumber | 1.3.6.1.2.1.10.48.1.3.1.3 | OCTET STRING (SIZE (12)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (12)) · read-only · current Vendor model number as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorSerialNumber | 1.3.6.1.2.1.10.48.1.3.1.4 | OCTET STRING (SIZE (12)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (12)) · read-only · current Vendor serial number as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorEOCSoftwareVersion | 1.3.6.1.2.1.10.48.1.3.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Vendor EOC version as reported in a Discovery Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvStandardVersion | 1.3.6.1.2.1.10.48.1.3.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Version of the HDSL2/SHDSL standard implemented, as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorListNumber | 1.3.6.1.2.1.10.48.1.3.1.7 | OCTET STRING (SIZE (3)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (3)) · read-only · current Vendor list number as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorIssueNumber | 1.3.6.1.2.1.10.48.1.3.1.8 | OCTET STRING (SIZE (2)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current Vendor issue number as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorSoftwareVersion | 1.3.6.1.2.1.10.48.1.3.1.9 | OCTET STRING (SIZE (6)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (6)) · read-only · current Vendor software version as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvEquipmentCode | 1.3.6.1.2.1.10.48.1.3.1.10 | OCTET STRING (SIZE (10)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (10)) · read-only · current Equipment code conforming to ANSI T1.213, Coded Identification of Equipment Entities. | |||||||||||||||||||||
| Chdsl2ShdslInvVendorOther | 1.3.6.1.2.1.10.48.1.3.1.11 | OCTET STRING (SIZE (12)) | RO | ||||||||||||||||||
column · OCTET STRING (SIZE (12)) · read-only · current Other vendor information as reported in an Inventory Response message. | |||||||||||||||||||||
| Chdsl2ShdslInvTransmissionModeCapability | 1.3.6.1.2.1.10.48.1.3.1.12 | Hdsl2ShdslTransmissionModeType | RO | ||||||||||||||||||
column · Hdsl2ShdslTransmissionModeType · read-only · current Contains the transmission mode capability of the SHDSL unit. | |||||||||||||||||||||
| Thdsl2ShdslEndpointConfTable | 1.3.6.1.2.1.10.48.1.4 | NA | |||||||||||||||||||
table · not-accessible · current This table supports configuration parameters for segment endpoints in an HDSL2/SHDSL line. As this table is indexed by ifIndex, it MUST be maintained in a persistent manner. | |||||||||||||||||||||
| Rhdsl2ShdslEndpointConfEntry | 1.3.6.1.2.1.10.48.1.4.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslEndpointConfTable. Each entry represents a single segment endpoint in an HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire pair of the associated modem. | |||||||||||||||||||||
| Chdsl2ShdslEndpointSide | 1.3.6.1.2.1.10.48.1.4.1.1 | Hdsl2ShdslUnitSide | NA | ||||||||||||||||||
column · Hdsl2ShdslUnitSide · not-accessible · current The side of the unit associated with this segment endpoint -- Network/Customer side -- as per the Hdsl2ShdslUnitSide textual convention. | |||||||||||||||||||||
| Chdsl2ShdslEndpointWirePair | 1.3.6.1.2.1.10.48.1.4.1.2 | Hdsl2ShdslWirePair | NA | ||||||||||||||||||
column · Hdsl2ShdslWirePair · not-accessible · current The wire pair of the modem associated with this segment endpoint as per the Hdsl2ShdslWirePair textual convention. | |||||||||||||||||||||
| Chdsl2ShdslEndpointAlarmConfProfile | 1.3.6.1.2.1.10.48.1.4.1.3 | SnmpAdminString (SIZE (0..32)) | RW | ||||||||||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-write · current This object configures the alarm threshold values to be used for this segment endpoint. The values are obtained from the alarm configuration profile referenced by this object. The value of this object is the index of the referenced profile in the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a zero-length SnmpAdminString). If the value is a zero-length SnmpAdminString, the endpoint uses the default Alarm Configuration Profile for the associated span as per the hdsl2ShdslSpanConfAlarmProfile object in the hdsl2ShdslSpanConfTable. The default value of this object is a zero-length SnmpAdminString. Any attempt to set this object to a value that is not the value of the index for an active entry in the profile table, hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected. | |||||||||||||||||||||
| Thdsl2ShdslEndpointCurrTable | 1.3.6.1.2.1.10.48.1.5 | NA | |||||||||||||||||||
table · not-accessible · current This table contains current status and performance information for segment endpoints in HDSL2/SHDSL lines. As with other tables in this MIB module indexed by ifIndex, entries in this table MUST be maintained in a persistent manner. | |||||||||||||||||||||
| Rhdsl2ShdslEndpointCurrEntry | 1.3.6.1.2.1.10.48.1.5.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, the side of the unit, and the wire pair of the associated modem. | |||||||||||||||||||||
| Chdsl2ShdslEndpointCurrAtn | 1.3.6.1.2.1.10.48.1.5.1.1 | Integer32 (-127..128) | RO | 0 | |||||||||||||||||
column · Integer32 (-127..128) · read-only · current The current loop attenuation for this endpoint as reported in a Network or Customer Side Performance Status message.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurrSnrMgn | 1.3.6.1.2.1.10.48.1.5.1.2 | Integer32 (-127..128) | RO | 0 | |||||||||||||||||
column · Integer32 (-127..128) · read-only · current The current SNR margin for this endpoint as reported in a Status Response/SNR message.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurrStatus | 1.3.6.1.2.1.10.48.1.5.1.3 | Bits | RO | ||||||||||||||||||
column · Bits · read-only · current Contains the current state of the endpoint. This is a
bit-map of possible conditions. The various bit positions
are as follows:
noDefect There are no defects on the line.
powerBackoff Indicates enhanced Power Backoff.
deviceFault Indicates that a vendor-dependent
diagnostic or self-test fault
has been detected.
dcContinuityFault Indicates vendor-dependent
conditions that interfere with
span powering such as short and
open circuits.
snrMarginAlarm Indicates that the SNR margin
has dropped below the alarm threshold.
loopAttenuationAlarm Indicates that the loop attenuation
exceeds the alarm threshold.
loswFailureAlarm Indicates a forward LOSW alarm.
configInitFailure Endpoint failure during initialization
due to paired endpoint not able to
support requested configuration.
protocolInitFailure Endpoint failure during initialization
due to incompatible protocol used by
the paired endpoint.
noNeighborPresent Endpoint failure during initialization
due to no activation sequence detected
from paired endpoint.
loopbackActive A loopback is currently active at this
segment endpoint.
This is intended to supplement ifOperStatus. Note that there
is a 1:1 relationship between the status bits defined in this
object and the notification thresholds defined elsewhere in
this MIB module.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointES | 1.3.6.1.2.1.10.48.1.5.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of Errored Seconds (ES) on this endpoint since the xU was last restarted.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointSES | 1.3.6.1.2.1.10.48.1.5.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of Severely Errored Seconds (SES) on this endpoint since the xU was last restarted.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCRCanomalies | 1.3.6.1.2.1.10.48.1.5.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of CRC anomalies on this endpoint since the xU was last restarted.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointLOSWS | 1.3.6.1.2.1.10.48.1.5.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of Loss of Sync Word (LOSW) Seconds on this endpoint since the xU was last restarted.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointUAS | 1.3.6.1.2.1.10.48.1.5.1.8 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Count of Unavailable Seconds (UAS) on this endpoint since the xU was last restarted.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr15MinTimeElapsed | 1.3.6.1.2.1.10.48.1.5.1.9 | Hdsl2ShdslPerfTimeElapsed | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfTimeElapsed · read-only · current Total elapsed seconds in the current 15-minute interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr15MinES | 1.3.6.1.2.1.10.48.1.5.1.10 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Count of Errored Seconds (ES) in the current 15-minute interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr15MinSES | 1.3.6.1.2.1.10.48.1.5.1.11 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Count of Severely Errored Seconds (SES) in the current 15-minute interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr15MinCRCanomalies | 1.3.6.1.2.1.10.48.1.5.1.12 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Count of CRC anomalies in the current 15-minute interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr15MinLOSWS | 1.3.6.1.2.1.10.48.1.5.1.13 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Count of Loss of Sync Word (LOSW) Seconds in the current 15-minute interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr15MinUAS | 1.3.6.1.2.1.10.48.1.5.1.14 | PerfCurrentCount | RO | ||||||||||||||||||
column · PerfCurrentCount · read-only · current Count of Unavailable Seconds (UAS) in the current 15-minute interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr1DayTimeElapsed | 1.3.6.1.2.1.10.48.1.5.1.15 | Hdsl2ShdslPerfTimeElapsed | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfTimeElapsed · read-only · current Number of seconds that have elapsed since the beginning of the current 1-day interval.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr1DayES | 1.3.6.1.2.1.10.48.1.5.1.16 | Hdsl2ShdslPerfCurrDayCount | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfCurrDayCount · read-only · current Count of Errored Seconds (ES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr1DaySES | 1.3.6.1.2.1.10.48.1.5.1.17 | Hdsl2ShdslPerfCurrDayCount | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfCurrDayCount · read-only · current Count of Severely Errored Seconds (SES) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr1DayCRCanomalies | 1.3.6.1.2.1.10.48.1.5.1.18 | Hdsl2ShdslPerfCurrDayCount | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfCurrDayCount · read-only · current Count of CRC anomalies during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr1DayLOSWS | 1.3.6.1.2.1.10.48.1.5.1.19 | Hdsl2ShdslPerfCurrDayCount | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfCurrDayCount · read-only · current Count of Loss of Sync Word (LOSW) Seconds during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurr1DayUAS | 1.3.6.1.2.1.10.48.1.5.1.20 | Hdsl2ShdslPerfCurrDayCount | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfCurrDayCount · read-only · current Count of Unavailable Seconds (UAS) during the current day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurrTipRingReversal | 1.3.6.1.2.1.10.48.1.5.1.21 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the state of the tip/ring for the wire pair.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointCurrActivationState | 1.3.6.1.2.1.10.48.1.5.1.22 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the activation or training state of the wire pair.
| |||||||||||||||||||||
| Thdsl2Shdsl15MinIntervalTable | 1.3.6.1.2.1.10.48.1.6 | NA | |||||||||||||||||||
table · not-accessible · current This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. | |||||||||||||||||||||
| Rhdsl2Shdsl15MinIntervalEntry | 1.3.6.1.2.1.10.48.1.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2Shdsl15MinIntervalTable. | |||||||||||||||||||||
| Chdsl2Shdsl15MinIntervalNumber | 1.3.6.1.2.1.10.48.1.6.1.1 | Unsigned32 (1..96) | NA | ||||||||||||||||||
column · Unsigned32 (1..96) · not-accessible · current Performance Data Interval number. Interval 1 is the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. | |||||||||||||||||||||
| Chdsl2Shdsl15MinIntervalES | 1.3.6.1.2.1.10.48.1.6.1.2 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Count of Errored Seconds (ES) during the interval.
| |||||||||||||||||||||
| Chdsl2Shdsl15MinIntervalSES | 1.3.6.1.2.1.10.48.1.6.1.3 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Count of Severely Errored Seconds (SES) during the interval.
| |||||||||||||||||||||
| Chdsl2Shdsl15MinIntervalCRCanomalies | 1.3.6.1.2.1.10.48.1.6.1.4 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Count of CRC anomalies during the interval.
| |||||||||||||||||||||
| Chdsl2Shdsl15MinIntervalLOSWS | 1.3.6.1.2.1.10.48.1.6.1.5 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Count of Loss of Sync Word (LOSW) Seconds during the interval.
| |||||||||||||||||||||
| Chdsl2Shdsl15MinIntervalUAS | 1.3.6.1.2.1.10.48.1.6.1.6 | PerfIntervalCount | RO | ||||||||||||||||||
column · PerfIntervalCount · read-only · current Count of Unavailable Seconds (UAS) during the interval.
| |||||||||||||||||||||
| Thdsl2Shdsl1DayIntervalTable | 1.3.6.1.2.1.10.48.1.7 | NA | |||||||||||||||||||
table · not-accessible · current This table provides one row for each HDSL2/SHDSL endpoint performance data collection interval. This table contains live data from equipment. As such, it is NOT persistent. | |||||||||||||||||||||
| Rhdsl2Shdsl1DayIntervalEntry | 1.3.6.1.2.1.10.48.1.7.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2Shdsl1DayIntervalTable. | |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalNumber | 1.3.6.1.2.1.10.48.1.7.1.1 | Unsigned32 (1..30) | NA | ||||||||||||||||||
column · Unsigned32 (1..30) · not-accessible · current History Data Interval number. Interval 1 is the most recent previous day; interval 30 is 30 days ago. Intervals 2..30 are optional. | |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalMoniSecs | 1.3.6.1.2.1.10.48.1.7.1.2 | Hdsl2ShdslPerfTimeElapsed | RO | ||||||||||||||||||
column · Hdsl2ShdslPerfTimeElapsed · read-only · current The amount of time in the 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
| |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalES | 1.3.6.1.2.1.10.48.1.7.1.3 | Hdsl2Shdsl1DayIntervalCount | RO | ||||||||||||||||||
column · Hdsl2Shdsl1DayIntervalCount · read-only · current Count of Errored Seconds (ES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
| |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalSES | 1.3.6.1.2.1.10.48.1.7.1.4 | Hdsl2Shdsl1DayIntervalCount | RO | ||||||||||||||||||
column · Hdsl2Shdsl1DayIntervalCount · read-only · current Count of Severely Errored Seconds (SES) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
| |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalCRCanomalies | 1.3.6.1.2.1.10.48.1.7.1.5 | Hdsl2Shdsl1DayIntervalCount | RO | ||||||||||||||||||
column · Hdsl2Shdsl1DayIntervalCount · read-only · current Count of CRC anomalies during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
| |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalLOSWS | 1.3.6.1.2.1.10.48.1.7.1.6 | Hdsl2Shdsl1DayIntervalCount | RO | ||||||||||||||||||
column · Hdsl2Shdsl1DayIntervalCount · read-only · current Count of Loss of Sync Word (LOSW) Seconds during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
| |||||||||||||||||||||
| Chdsl2Shdsl1DayIntervalUAS | 1.3.6.1.2.1.10.48.1.7.1.7 | Hdsl2Shdsl1DayIntervalCount | RO | ||||||||||||||||||
column · Hdsl2Shdsl1DayIntervalCount · read-only · current Count of Unavailable Seconds (UAS) during the 1-day interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.
| |||||||||||||||||||||
| Thdsl2ShdslEndpointMaintTable | 1.3.6.1.2.1.10.48.1.8 | NA | |||||||||||||||||||
table · not-accessible · current This table supports maintenance operations (e.g., loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As such, it is NOT persistent. | |||||||||||||||||||||
| Rhdsl2ShdslEndpointMaintEntry | 1.3.6.1.2.1.10.48.1.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslEndpointMaintTable. Each entry corresponds to a single segment endpoint and is indexed by the ifIndex of the HDSL2/SHDSL line, the UnitId of the associated unit, and the side of the unit. | |||||||||||||||||||||
| Chdsl2ShdslMaintLoopbackConfig | 1.3.6.1.2.1.10.48.1.8.1.1 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object controls configuration of loopbacks for the associated segment endpoint. The status of the loopback is obtained via the hdsl2ShdslEndpointCurrStatus object.
| |||||||||||||||||||||
| Chdsl2ShdslMaintTipRingReversal | 1.3.6.1.2.1.10.48.1.8.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the state of the tip/ring pair at the associated segment endpoint.
| |||||||||||||||||||||
| Chdsl2ShdslMaintPowerBackOff | 1.3.6.1.2.1.10.48.1.8.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode.
| |||||||||||||||||||||
| Chdsl2ShdslMaintSoftRestart | 1.3.6.1.2.1.10.48.1.8.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current This object enables the manager to trigger a soft restart of the modem at the associated segment endpoint. The manager may only set this object to the 'restart(2)' value, which initiates a restart. The agent will perform a restart after approximately 5 seconds. Following the 5 second period, the agent will restore the object to the 'ready(1)' state.
| |||||||||||||||||||||
| Thdsl2ShdslUnitMaintTable | 1.3.6.1.2.1.10.48.1.9 | NA | |||||||||||||||||||
table · not-accessible · current This table supports maintenance operations for units in a HDSL2/SHDSL line. Entries in this table MUST be maintained in a persistent manner. | |||||||||||||||||||||
| Rhdsl2ShdslUnitMaintEntry | 1.3.6.1.2.1.10.48.1.9.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry in the hdsl2ShdslUnitMaintTable. Each entry corresponds to a single unit and is indexed by the ifIndex of the HDSL2/SHDSL line and the UnitId of the associated unit.
| |||||||||||||||||||||
| Chdsl2ShdslMaintLoopbackTimeout | 1.3.6.1.2.1.10.48.1.9.1.1 | Integer32 (0..4095) | RW | ||||||||||||||||||
column · Integer32 (0..4095) · read-write · current This object configures the timeout value for loopbacks initiated at segments endpoints contained in the associated unit. A value of 0 disables the timeout.
| |||||||||||||||||||||
| Chdsl2ShdslMaintUnitPowerSource | 1.3.6.1.2.1.10.48.1.9.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates the DC power source being used by the associated unit.
| |||||||||||||||||||||
| Thdsl2ShdslSpanConfProfileTable | 1.3.6.1.2.1.10.48.1.10 | NA | |||||||||||||||||||
table · not-accessible · current This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintained in a persistent manner. | |||||||||||||||||||||
| Rhdsl2ShdslSpanConfProfileEntry | 1.3.6.1.2.1.10.48.1.10.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a profile are applied to those lines referencing that profile (see the hdsl2ShdslSpanConfProfile object). Profiles may be created/deleted using the row creation/deletion mechanism via hdsl2ShdslSpanConfProfileRowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed. | |||||||||||||||||||||
| Chdsl2ShdslSpanConfProfileName | 1.3.6.1.2.1.10.48.1.10.1.1 | SnmpAdminString (SIZE (1..32)) | NA | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current This object is the unique index associated with this profile. Entries in this table are referenced via the object hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry. | |||||||||||||||||||||
| Chdsl2ShdslSpanConfWireInterface | 1.3.6.1.2.1.10.48.1.10.1.2 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object configures the two-wire or optional four-wire, six-wire, or eight-wire operation for SHDSL lines.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfMinLineRate | 1.3.6.1.2.1.10.48.1.10.1.3 | Unsigned32 (0..4294967295) | RC | ||||||||||||||||||
column · Unsigned32 (0..4294967295) · read-create · current This object configures the minimum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfMaxLineRate | 1.3.6.1.2.1.10.48.1.10.1.4 | Unsigned32 (0..4294967295) | RC | ||||||||||||||||||
column · Unsigned32 (0..4294967295) · read-create · current This object configures the maximum transmission rate for the associated SHDSL Line in bits-per-second (bps) and includes both payload (user data) and any applicable framing overhead. If the minimum line rate equals the maximum line rate (hdsl2ShdslSpanMaxLineRate), the line rate is considered 'fixed'. If the minimum line rate is less than the maximum line rate, the line rate is considered 'rate-adaptive'.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfPSD | 1.3.6.1.2.1.10.48.1.10.1.5 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object configures use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. Support for symmetric PSD is mandatory for all supported data rates. Support for asymmetric PSD is optional.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfTransmissionMode | 1.3.6.1.2.1.10.48.1.10.1.6 | Hdsl2ShdslTransmissionModeType | RC | ||||||||||||||||||
column · Hdsl2ShdslTransmissionModeType · read-create · current This object specifies the regional setting for the SHDSL line. | |||||||||||||||||||||
| Chdsl2ShdslSpanConfRemoteEnabled | 1.3.6.1.2.1.10.48.1.10.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object enables/disables support for remote management of the units in an SHDSL line from the STU-R via the EOC.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfPowerFeeding | 1.3.6.1.2.1.10.48.1.10.1.8 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object enables/disables support for optional power feeding in an SHDSL line.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfCurrCondTargetMarginDown | 1.3.6.1.2.1.10.48.1.10.1.9 | Integer32 (-10..21) | RC | ||||||||||||||||||
column · Integer32 (-10..21) · read-create · current This object specifies the downstream current condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfWorstCaseTargetMarginDown | 1.3.6.1.2.1.10.48.1.10.1.10 | Integer32 (-10..21) | RC | ||||||||||||||||||
column · Integer32 (-10..21) · read-create · current This object specifies the downstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfCurrCondTargetMarginUp | 1.3.6.1.2.1.10.48.1.10.1.11 | Integer32 (-10..21) | RC | ||||||||||||||||||
column · Integer32 (-10..21) · read-create · current This object specifies the upstream current-condition target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfWorstCaseTargetMarginUp | 1.3.6.1.2.1.10.48.1.10.1.12 | Integer32 (-10..21) | RC | ||||||||||||||||||
column · Integer32 (-10..21) · read-create · current This object specifies the upstream worst-case target SNR margin for an SHDSL line. The SNR margin is the difference between the desired SNR and the actual SNR. Target SNR margin is the desired SNR margin for a unit.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfUsedTargetMargins | 1.3.6.1.2.1.10.48.1.10.1.13 | Bits | RC | ||||||||||||||||||
column · Bits · read-create · current Indicates whether a target SNR margin is enabled or
disabled. This is a bit-map of possible settings. The
various bit positions are as follows:
currCondDown - current-condition downstream target SNR
margin enabled
worstCaseDown - worst-case downstream target SNR margin
enabled
currCondUp - current-condition upstream target SNR
margin enabled
worstCaseUp - worst-case upstream target SNR margin
enabled.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfReferenceClock | 1.3.6.1.2.1.10.48.1.10.1.14 | Hdsl2ShdslClockReferenceType | RC | ||||||||||||||||||
column · Hdsl2ShdslClockReferenceType · read-create · current This object configures the clock reference for the STU-C in an SHDSL Line. | |||||||||||||||||||||
| Chdsl2ShdslSpanConfLineProbeEnable | 1.3.6.1.2.1.10.48.1.10.1.15 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current This object enables/disables support for Line Probe of the units in an SHDSL line. When Line Probe is enabled, the system performs Line Probing to find the best possible rate. If Line Probe is disabled, the rate adaptation phase is skipped to shorten set up time.
| |||||||||||||||||||||
| Chdsl2ShdslSpanConfProfileRowStatus | 1.3.6.1.2.1.10.48.1.10.1.16 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object controls creation/deletion of the associated entry in this table per the semantics of RowStatus. If an active entry is referenced in hdsl2ShdslSpanConfProfile, the entry MUST remain active until all references are removed. | |||||||||||||||||||||
| Thdsl2ShdslEndpointAlarmConfProfileTable | 1.3.6.1.2.1.10.48.1.11 | NA | |||||||||||||||||||
table · not-accessible · current This table supports definitions of alarm configuration profiles for HDSL2/SHDSL segment endpoints. This table MUST be maintained in a persistent manner. | |||||||||||||||||||||
| Rhdsl2ShdslEndpointAlarmConfProfileEntry | 1.3.6.1.2.1.10.48.1.11.1 | NA | |||||||||||||||||||
row · not-accessible · current Each entry corresponds to a single alarm configuration profile. Each profile contains a set of parameters for setting alarm thresholds for various performance attributes monitored at HDSL2/SHDSL segment endpoints. Profiles may be created/deleted using the row creation/deletion mechanism via hdsl2ShdslEndpointAlarmConfProfileRowStatus. If an active entry is referenced in either hdsl2ShdslSpanConfAlarmProfile or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain active until all references are removed. | |||||||||||||||||||||
| Chdsl2ShdslEndpointAlarmConfProfileName | 1.3.6.1.2.1.10.48.1.11.1.1 | SnmpAdminString (SIZE (1..32)) | NA | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current This object is the unique index associated with this profile. | |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshLoopAttenuation | 1.3.6.1.2.1.10.48.1.11.1.2 | Integer32 (-127..128) | RC | ||||||||||||||||||
column · Integer32 (-127..128) · read-create · current This object configures the loop attenuation alarm threshold. When the current value of hdsl2ShdslEndpointCurrAtn reaches or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing MAY be generated.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshSNRMargin | 1.3.6.1.2.1.10.48.1.11.1.3 | Integer32 (-127..128) | RC | ||||||||||||||||||
column · Integer32 (-127..128) · read-create · current This object configures the SNR margin alarm threshold. When the current value of hdsl2ShdslEndpointCurrSnrMgn reaches or drops below this threshold, a hdsl2ShdslSNRMarginCrossing MAY be generated.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshES | 1.3.6.1.2.1.10.48.1.11.1.4 | Hdsl2ShdslPerfIntervalThreshold | RC | ||||||||||||||||||
column · Hdsl2ShdslPerfIntervalThreshold · read-create · current This object configures the threshold for the number of Errored Seconds (ES) within any given 15-minute performance data collection interval. If the value of Errored Seconds in a particular 15-minute collection interval reaches/ exceeds this value, an hdsl2ShdslPerfESThresh MAY be generated. At most, one notification will be sent per interval per endpoint.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshSES | 1.3.6.1.2.1.10.48.1.11.1.5 | Hdsl2ShdslPerfIntervalThreshold | RC | ||||||||||||||||||
column · Hdsl2ShdslPerfIntervalThreshold · read-create · current This object configures the threshold for the number of Severely Errored Seconds (SES) within any given 15-minute performance data collection interval. If the value of Severely Errored Seconds in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfSESThresh MAY be generated. At most, one notification will be sent per interval per endpoint.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshCRCanomalies | 1.3.6.1.2.1.10.48.1.11.1.6 | Integer32 | RC | ||||||||||||||||||
column · Integer32 · read-create · current This object configures the threshold for the number of CRC anomalies within any given 15-minute performance data collection interval. If the value of CRC anomalies in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfCRCanomaliesThresh MAY be generated. At most, one notification will be sent per interval per endpoint.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshLOSWS | 1.3.6.1.2.1.10.48.1.11.1.7 | Hdsl2ShdslPerfIntervalThreshold | RC | ||||||||||||||||||
column · Hdsl2ShdslPerfIntervalThreshold · read-create · current This object configures the threshold for the number of Loss of Sync Word (LOSW) Seconds within any given 15-minute performance data collection interval. If the value of LOSW in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfLOSWSThresh MAY be generated. At most, one notification will be sent per interval per endpoint.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointThreshUAS | 1.3.6.1.2.1.10.48.1.11.1.8 | Hdsl2ShdslPerfIntervalThreshold | RC | ||||||||||||||||||
column · Hdsl2ShdslPerfIntervalThreshold · read-create · current This object configures the threshold for the number of Unavailable Seconds (UAS) within any given 15-minute performance data collection interval. If the value of UAS in a particular 15-minute collection interval reaches/exceeds this value, an hdsl2ShdslPerfUASThresh MAY be generated. At most, one notification will be sent per interval per endpoint.
| |||||||||||||||||||||
| Chdsl2ShdslEndpointAlarmConfProfileRowStatus | 1.3.6.1.2.1.10.48.1.11.1.9 | RowStatus | RC | ||||||||||||||||||
column · RowStatus · read-create · current This object controls creation/deletion of the associated entry in this table as per the semantics of RowStatus. If an active entry is referenced in either hdsl2ShdslSpanConfAlarmProfile or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain active until all references are removed. | |||||||||||||||||||||
| Nhdsl2ShdslConformance | 1.3.6.1.2.1.10.48.3 | ||||||||||||||||||||
| Nhdsl2ShdslGroups | 1.3.6.1.2.1.10.48.3.1 | ||||||||||||||||||||
| Ghdsl2ShdslSpanConfGroup | 1.3.6.1.2.1.10.48.3.1.1 | ||||||||||||||||||||
group · current This group supports objects for configuring span-related parameters for HDSL2/SHDSL lines. | |||||||||||||||||||||
| Ghdsl2ShdslSpanStatusGroup | 1.3.6.1.2.1.10.48.3.1.2 | ||||||||||||||||||||
group · current This group supports objects for retrieving span-related status for HDSL2/SHDSL lines. | |||||||||||||||||||||
| Ghdsl2ShdslInventoryShdslGroup | 1.3.6.1.2.1.10.48.3.1.3 | ||||||||||||||||||||
group · current This group supports objects for retrieving SHDSL-specific inventory information. | |||||||||||||||||||||
| Ghdsl2ShdslSpanShdslStatusGroup | 1.3.6.1.2.1.10.48.3.1.4 | ||||||||||||||||||||
group · current This group supports objects for retrieving SHDSL-specific span-related status. | |||||||||||||||||||||
| Ghdsl2ShdslInventoryGroup | 1.3.6.1.2.1.10.48.3.1.5 | ||||||||||||||||||||
group · current This group supports objects that provide unit inventory information about the units in HDSL2/SHDSL lines.
| |||||||||||||||||||||
| Ghdsl2ShdslEndpointConfGroup | 1.3.6.1.2.1.10.48.3.1.6 | ||||||||||||||||||||
group · current This group supports objects for configuring parameters for segment endpoints in HDSL2/SHDSL lines.
| |||||||||||||||||||||
| Ghdsl2ShdslEndpointCurrGroup | 1.3.6.1.2.1.10.48.3.1.7 | ||||||||||||||||||||
group · current This group supports objects that provide current status and performance measurements relating to segment endpoints in HDSL2/SHDSL lines.
| |||||||||||||||||||||
| Ghdsl2Shdsl15MinIntervalGroup | 1.3.6.1.2.1.10.48.3.1.8 | ||||||||||||||||||||
group · current This group supports objects that maintain historic performance measurements relating to segment endpoints in HDSL2/SHDSL lines in 15-minute intervals. | |||||||||||||||||||||
| Ghdsl2Shdsl1DayIntervalGroup | 1.3.6.1.2.1.10.48.3.1.9 | ||||||||||||||||||||
group · current This group supports objects that maintain historic performance measurements relating to segment endpoints in HDSL2/SHDSL lines in 1-day intervals. | |||||||||||||||||||||
| Ghdsl2ShdslMaintenanceGroup | 1.3.6.1.2.1.10.48.3.1.10 | ||||||||||||||||||||
group · current This group supports objects that provide support for maintenance actions for HDSL2/SHDSL lines. | |||||||||||||||||||||
| Ghdsl2ShdslEndpointAlarmConfGroup | 1.3.6.1.2.1.10.48.3.1.11 | ||||||||||||||||||||
group · current This group supports objects that allow configuration of alarm thresholds for various performance parameters for HDSL2/SHDSL lines.
| |||||||||||||||||||||
| Ghdsl2ShdslNotificationGroup | 1.3.6.1.2.1.10.48.3.1.12 | ||||||||||||||||||||
group · current This group supports notifications of significant conditions associated with HDSL2/SHDSL lines.
| |||||||||||||||||||||
| Ghdsl2ShdslSpanConfProfileGroup | 1.3.6.1.2.1.10.48.3.1.13 | ||||||||||||||||||||
group · current This group supports objects that constitute configuration profiles for configuring span-related parameters in SHDSL lines.
| |||||||||||||||||||||
| Ghdsl2ShdslWirePairGroup | 1.3.6.1.2.1.10.48.3.1.14 | ||||||||||||||||||||
group · current This group supports objects that provide the status of SHDSL-specific wire pairs. | |||||||||||||||||||||
| Ghdsl2ShdslPayloadRateGroup | 1.3.6.1.2.1.10.48.3.1.15 | ||||||||||||||||||||
group · current This group supports objects for retrieving payload rates that exclude any framing overhead. | |||||||||||||||||||||
| Nhdsl2ShdslCompliances | 1.3.6.1.2.1.10.48.3.2 | ||||||||||||||||||||
| Mhdsl2ShdslLineMibCompliance | 1.3.6.1.2.1.10.48.3.2.1 | deprecated | |||||||||||||||||||
compliance · deprecated The compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl. **** This compliance statement is deprecated. ****
| |||||||||||||||||||||
| Mhdsl2GshdslbisLineMibCompliance | 1.3.6.1.2.1.10.48.3.2.2 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP entities that implement HDSL2 and SHDSL. The version of SHDSL supported in this compliance statement is g.shdsl.bis.
| |||||||||||||||||||||
Textual conventions
Hdsl2Shdsl1DayIntervalCountGauge32Display hint:
dA counter associated with interface performance measurements during the most previous 1-day (24 hour) measurement interval. The value of this gauge is equal to the value of the current day gauge, as defined in a companion object of type Hdsl2ShdslPerfCurrDayCount, at the end of its most recent interval. In the case where the agent has no valid data available for this interval, the corresponding object instance is not available, and upon a retrieval request, a corresponding error message shall be returned to indicate that this instance does not exist.
Hdsl2ShdslClockReferenceTypeINTEGERdataClk(4)dataOrNetworkClk(3)localClk(1)networkClk(2)The various STU-C symbol clock references for the HDSL2/SHDSL span, represented as an enumeration.
Hdsl2ShdslPerfCurrDayCountGauge32Display hint:
dA gauge associated with interface performance measurements in a current 1-day (24 hour) measurement interval. The value of this gauge starts at zero at the beginning of an interval and is increased when associated events occur, until the end of the 1-day interval. At that time, the value of the gauge is stored in the previous 1-day history interval, as defined in a companion object of type Hdsl2Shdsl1DayIntevalCount, and the current interval gauge is restarted at zero. In the case where the agent has no valid data available for this interval, the corresponding object instance is not available, and upon a retrieval request, a corresponding error message shall be returned to indicate that this instance does not exist. Please note that zero is a valid value.
Hdsl2ShdslPerfIntervalThresholdUnsigned32 (0..900)Display hint:
dThis convention defines a range of values that may be set in a fault threshold alarm control. As the number of seconds in a 15-minute interval numbers at most 900, objects of this type may have a range of 0...900, where the value of 0 disables the alarm.
Hdsl2ShdslPerfTimeElapsedUnsigned32 (0..86399)Display hint:
dThe number of seconds that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock or the addition of a leap second, the current interval exceeds the maximum value, the agent will return the maximum value. For 15-minute intervals, the range is limited to (0..899). For 24-hour intervals, the range is limited to (0..86399).
Hdsl2ShdslTransmissionModeTypeBitsregion1(0)region2(1)Contains the regional setting of the HDSL2/SHDSL span, represented as a bit-map of possible settings. The various bit positions are as follows: Bit Meaning Description 1 region 1 Indicates ITU-T G.991.2 Annex A. 2 region 2 Indicates ITU-T G.991.2 Annex B.
Hdsl2ShdslUnitIdINTEGERxru1(3)xru2(4)xru3(5)xru4(6)xru5(7)xru6(8)xru7(9)xru8(10)xtuC(1)xtuR(2)This is the unique identification for all units in an HDSL2/SHDSL span. It is based on the EOC unit addressing scheme with reference to the xtuC.
Hdsl2ShdslUnitSideINTEGERcustomerSide(2)networkSide(1)This is the referenced side of an HDSL2/SHDSL unit - Network or Customer side. The side facing the Network is the Network side, while the side facing the Customer is the Customer side.
Hdsl2ShdslWirePairINTEGERwirePair1(1)wirePair2(2)wirePair3(3)wirePair4(4)This is the referenced pair of wires in an HDSL2/SHDSL segment. HDSL2 only supports a single pair (wirePair1 or two wire), SHDSL lines support an optional second pair (wirePair2 or four wire), and G.shdsl.bis support an optional third pair (wirePair3 or six wire) and an optional fourth pair (wirePair4 or eight wire).
Traps / Notifications
- hdsl2ShdslLocalPowerLoss
1.3.6.1.2.1.10.48.0.16 - hdsl2ShdslLoopAttenCrossing
1.3.6.1.2.1.10.48.0.1 - hdsl2ShdslLoopbackFailure
1.3.6.1.2.1.10.48.0.9 - hdsl2ShdslPerfCRCanomaliesThresh
1.3.6.1.2.1.10.48.0.5 - hdsl2ShdslPerfESThresh
1.3.6.1.2.1.10.48.0.3 - hdsl2ShdslPerfLOSWSThresh
1.3.6.1.2.1.10.48.0.6 - hdsl2ShdslPerfSESThresh
1.3.6.1.2.1.10.48.0.4 - hdsl2ShdslPerfUASThresh
1.3.6.1.2.1.10.48.0.7 - hdsl2ShdslSNRMarginCrossing
1.3.6.1.2.1.10.48.0.2 - hdsl2ShdslSpanInvalidNumRepeaters
1.3.6.1.2.1.10.48.0.8 - hdsl2ShdslconfigInitFailure
1.3.6.1.2.1.10.48.0.13 - hdsl2ShdsldcContinuityFault
1.3.6.1.2.1.10.48.0.12 - hdsl2ShdsldeviceFault
1.3.6.1.2.1.10.48.0.11 - hdsl2ShdslnoNeighborPresent
1.3.6.1.2.1.10.48.0.15 - hdsl2ShdslpowerBackoff
1.3.6.1.2.1.10.48.0.10 - hdsl2ShdslprotocolInitFailure
1.3.6.1.2.1.10.48.0.14
Groups and compliance
- hdsl2GshdslbisLineMibCompliance
- hdsl2Shdsl15MinIntervalGroup
- hdsl2Shdsl1DayIntervalGroup
- hdsl2ShdslEndpointAlarmConfGroup
- hdsl2ShdslEndpointConfGroup
- hdsl2ShdslEndpointCurrGroup
- hdsl2ShdslInventoryGroup
- hdsl2ShdslInventoryShdslGroup
- hdsl2ShdslLineMibCompliance
- hdsl2ShdslMaintenanceGroup
- hdsl2ShdslNotificationGroup
- hdsl2ShdslPayloadRateGroup
- hdsl2ShdslSpanConfGroup
- hdsl2ShdslSpanConfProfileGroup
- hdsl2ShdslSpanShdslStatusGroup
- hdsl2ShdslSpanStatusGroup
- hdsl2ShdslWirePairGroup
Used by
- ONEACCESS-SHDSL-MIB (oneaccess)