MIB Browser

ENTITY-SENSOR-MIB

Standards (IETF)
This module defines Entity MIB extensions for physical
sensors.

Copyright (C) The Internet Society (2002). This version
of this MIB module is part of RFC 3433; see the RFC
itself for full legal notices.
Organization
IETF Entity MIB Working Group
Root OID
1.3.6.1.2.1.99
Last updated
Objects
17
Source
Show full MIB
snmptranslate -m ENTITY-SENSOR-MIB -Tp
snmpwalk -v2c -c <community> -m ENTITY-SENSOR-MIB <host> 1.3.6.1.2.1.99

Imports

ENTITY-MIBentPhysicalIndex, entityPhysicalGroup
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp

OID tree

NameOIDTypeAccessStatusExample
IentitySensorMIB1.3.6.1.2.1.99
NentitySensorObjects1.3.6.1.2.1.99.1
TentPhySensorTable1.3.6.1.2.1.99.1.1NA
RentPhySensorEntry1.3.6.1.2.1.99.1.1.1NA
CentPhySensorType1.3.6.1.2.1.99.1.1.1.1EntitySensorDataTypeRO8
CentPhySensorScale1.3.6.1.2.1.99.1.1.1.2EntitySensorDataScaleRO9
CentPhySensorPrecision1.3.6.1.2.1.99.1.1.1.3EntitySensorPrecisionRO1
CentPhySensorValue1.3.6.1.2.1.99.1.1.1.4EntitySensorValueRO533
CentPhySensorOperStatus1.3.6.1.2.1.99.1.1.1.5EntitySensorStatusRO1
CentPhySensorUnitsDisplay1.3.6.1.2.1.99.1.1.1.6SnmpAdminStringROC
CentPhySensorValueTimeStamp1.3.6.1.2.1.99.1.1.1.7TimeStampRO192683866 (22d 7h 13m 58s)
CentPhySensorValueUpdateRate1.3.6.1.2.1.99.1.1.1.8Unsigned32RO0
NentitySensorConformance1.3.6.1.2.1.99.3
NentitySensorCompliances1.3.6.1.2.1.99.3.1
MentitySensorCompliance1.3.6.1.2.1.99.3.1.1
NentitySensorGroups1.3.6.1.2.1.99.3.2
GentitySensorValueGroup1.3.6.1.2.1.99.3.2.1

Textual conventions

EntitySensorDataScale INTEGER

atto(3) exa(14) femto(4) giga(12) kilo(10) mega(11) micro(7) milli(8) nano(6) peta(15) pico(5) tera(13) units(9) yocto(1) yotta(17) zepto(2) zetta(16)

An object using this data type represents a data scaling
factor, represented with an International System of Units
(SI) prefix.  The actual data units are determined by
examining an object of this type together with the
associated EntitySensorDataType object.

An object of this type SHOULD be defined together with
objects of type EntitySensorDataType and
EntitySensorPrecision.  Together, associated objects of
these three types are used to identify the semantics of an
object of type EntitySensorValue.
EntitySensorDataType INTEGER

amperes(5) celsius(8) cmm(11) hertz(7) other(1) percentRH(9) rpm(10) truthvalue(12) unknown(2) voltsAC(3) voltsDC(4) watts(6)

An object using this data type represents the Entity Sensor
measurement data type associated with a physical sensor
value. The actual data units are determined by examining an
object of this type together with the associated
EntitySensorDataScale object.

An object of this type SHOULD be defined together with
objects of type EntitySensorDataScale and
EntitySensorPrecision.  Together, associated objects of
these three types are used to identify the semantics of an
object of type EntitySensorValue.




Valid values are:

   other(1):        a measure other than those listed below
   unknown(2):      unknown measurement, or arbitrary,
                    relative numbers
   voltsAC(3):      electric potential
   voltsDC(4):      electric potential
   amperes(5):      electric current
   watts(6):        power
   hertz(7):        frequency
   celsius(8):      temperature
   percentRH(9):    percent relative humidity
   rpm(10):         shaft revolutions per minute
   cmm(11),:        cubic meters per minute (airflow)
   truthvalue(12):  value takes { true(1), false(2) }
EntitySensorPrecision Integer32 (-8..9)
An object using this data type represents a sensor
precision range.

An object of this type SHOULD be defined together with
objects of type EntitySensorDataType and
EntitySensorDataScale.  Together, associated objects of
these three types are used to identify the semantics of an
object of type EntitySensorValue.

If an object of this type contains a value in the range 1 to
9, it represents the number of decimal places in the
fractional part of an associated EntitySensorValue fixed-
point number.

If an object of this type contains a value in the range -8
to -1, it represents the number of accurate digits in the
associated EntitySensorValue fixed-point number.

The value zero indicates the associated EntitySensorValue
object is not a fixed-point number.

Agent implementors must choose a value for the associated
EntitySensorPrecision object so that the precision and

accuracy of the associated EntitySensorValue object is
correctly indicated.

For example, a physical entity representing a temperature
sensor that can measure 0 degrees to 100 degrees C in 0.1
degree increments, +/- 0.05 degrees, would have an
EntitySensorPrecision value of '1', an EntitySensorDataScale
value of 'units(9)', and an EntitySensorValue ranging from
'0' to '1000'.  The EntitySensorValue would be interpreted
as 'degrees C * 10'.
EntitySensorStatus INTEGER

nonoperational(3) ok(1) unavailable(2)

An object using this data type represents the operational
status of a physical sensor.

The value 'ok(1)' indicates that the agent can obtain the
sensor value.

The value 'unavailable(2)' indicates that the agent
presently cannot obtain the sensor value.

The value 'nonoperational(3)' indicates that the agent
believes the sensor is broken.  The sensor could have a hard
failure (disconnected wire), or a soft failure such as out-
of-range, jittery, or wildly fluctuating readings.
EntitySensorValue Integer32 (-1000000000..1000000000)
An object using this data type represents an Entity Sensor
value.
An object of this type SHOULD be defined together with
objects of type EntitySensorDataType, EntitySensorDataScale
and EntitySensorPrecision.  Together, associated objects of
those three types are used to identify the semantics of an
object of this data type.

The semantics of an object using this data type are
determined by the value of the associated
EntitySensorDataType object.

If the associated EntitySensorDataType object is equal to
'voltsAC(3)', 'voltsDC(4)', 'amperes(5)', 'watts(6),
'hertz(7)', 'celsius(8)', or 'cmm(11)', then an object of
this type MUST contain a fixed point number ranging from
-999,999,999 to +999,999,999.  The value -1000000000
indicates an underflow error. The value +1000000000
indicates an overflow error.  The EntitySensorPrecision
indicates how many fractional digits are represented in the
associated EntitySensorValue object.

If the associated EntitySensorDataType object is equal to
'percentRH(9)', then an object of this type MUST contain a
number ranging from 0 to 100.

If the associated EntitySensorDataType object is equal to
'rpm(10)', then an object of this type MUST contain a number
ranging from -999,999,999 to +999,999,999.

If the associated EntitySensorDataType object is equal to
'truthvalue(12)', then an object of this type MUST contain
either the value 'true(1)' or the value 'false(2)'.

If the associated EntitySensorDataType object is equal to
'other(1)' or unknown(2)', then an object of this type MUST
contain a number ranging from -1000000000 to 1000000000.

Used by