ATM-MIB
Standards (IETF)This is the MIB Module for ATM and AAL5-related objects for managing ATM interfaces, ATM virtual links, ATM cross-connects, AAL5 entities, and and AAL5 connections.
snmptranslate -m ATM-MIB -Tpsnmpwalk -v2c -c <community> -m ATM-MIB <host> 1.3.6.1.2.1.37Imports
| ATM-TC-MIB | AtmAddr, AtmConnCastType, AtmConnKind, AtmServiceCategory, AtmTrafficDescrParamIndex, AtmVcIdentifier, AtmVorXAdminStatus, AtmVorXLastChange, AtmVorXOperStatus, AtmVpIdentifier, atmNoClpNoScr |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2, private |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IatmMIB | 1.3.6.1.2.1.37 | ||||||||||||
identity This is the MIB Module for ATM and AAL5-related objects for managing ATM interfaces, ATM virtual links, ATM cross-connects, AAL5 entities, and and AAL5 connections. | |||||||||||||
| NatmMIBObjects | 1.3.6.1.2.1.37.1 | ||||||||||||
| TatmInterfaceConfTable | 1.3.6.1.2.1.37.1.2 | NA | |||||||||||
table · not-accessible · current This table contains ATM local interface configuration parameters, one entry per ATM interface port. | |||||||||||||
| RatmInterfaceConfEntry | 1.3.6.1.2.1.37.1.2.1 | NA | |||||||||||
row · not-accessible · current This list contains ATM interface configuration parameters and state variables and is indexed by ifIndex values of ATM interfaces.
| |||||||||||||
| CatmInterfaceMaxVpcs | 1.3.6.1.2.1.37.1.2.1.1 | INTEGER (0..4096) | RW | ||||||||||
column · INTEGER (0..4096) · read-write · current The maximum number of VPCs (PVPCs and SVPCs) supported at this ATM interface. At the ATM UNI, the maximum number of VPCs (PVPCs and SVPCs) ranges from 0 to 256 only. | |||||||||||||
| CatmInterfaceMaxVccs | 1.3.6.1.2.1.37.1.2.1.2 | INTEGER (0..65536) | RW | ||||||||||
column · INTEGER (0..65536) · read-write · current The maximum number of VCCs (PVCCs and SVCCs) supported at this ATM interface. | |||||||||||||
| CatmInterfaceConfVpcs | 1.3.6.1.2.1.37.1.2.1.3 | INTEGER (0..4096) | RO | ||||||||||
column · INTEGER (0..4096) · read-only · current The number of VPCs (PVPC, Soft PVPC and SVPC) currently in use at this ATM interface. It includes the number of PVPCs and Soft PVPCs that are configured at the interface, plus the number of SVPCs that are currently established at the interface. At the ATM UNI, the configured number of VPCs (PVPCs and SVPCs) can range from 0 to 256 only. | |||||||||||||
| CatmInterfaceConfVccs | 1.3.6.1.2.1.37.1.2.1.4 | INTEGER (0..65536) | RO | ||||||||||
column · INTEGER (0..65536) · read-only · current The number of VCCs (PVCC, Soft PVCC and SVCC) currently in use at this ATM interface. It includes the number of PVCCs and Soft PVCCs that are configured at the interface, plus the number of SVCCs that are currently established at the interface. | |||||||||||||
| CatmInterfaceMaxActiveVpiBits | 1.3.6.1.2.1.37.1.2.1.5 | INTEGER (0..12) | RW | ||||||||||
column · INTEGER (0..12) · read-write · current The maximum number of active VPI bits configured for use at the ATM interface. At the ATM UNI, the maximum number of active VPI bits configured for use ranges from 0 to 8 only. | |||||||||||||
| CatmInterfaceMaxActiveVciBits | 1.3.6.1.2.1.37.1.2.1.6 | INTEGER (0..16) | RW | ||||||||||
column · INTEGER (0..16) · read-write · current The maximum number of active VCI bits configured for use at this ATM interface. | |||||||||||||
| CatmInterfaceIlmiVpi | 1.3.6.1.2.1.37.1.2.1.7 | AtmVpIdentifier | RW | ||||||||||
column · AtmVpIdentifier · read-write · current The VPI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface. | |||||||||||||
| CatmInterfaceIlmiVci | 1.3.6.1.2.1.37.1.2.1.8 | AtmVcIdentifier | RW | ||||||||||
column · AtmVcIdentifier · read-write · current The VCI value of the VCC supporting the ILMI at this ATM interface. If the values of atmInterfaceIlmiVpi and atmInterfaceIlmiVci are both equal to zero then the ILMI is not supported at this ATM interface. | |||||||||||||
| CatmInterfaceAddressType | 1.3.6.1.2.1.37.1.2.1.9 | INTEGER | RO | deprecated | |||||||||
column · INTEGER · read-only · deprecated The type of primary ATM address configured for use at this ATM interface.
| |||||||||||||
| CatmInterfaceAdminAddress | 1.3.6.1.2.1.37.1.2.1.10 | AtmAddr | RO | deprecated | |||||||||
column · AtmAddr · read-only · deprecated The primary address assigned for administrative purposes, for example, an address associated with the service provider side of a public network UNI (thus, the value of this address corresponds with the value of ifPhysAddress at the host side). If this interface has no assigned administrative address, or when the address used for administrative purposes is the same as that used for ifPhysAddress, then this is an octet string of zero length. | |||||||||||||
| CatmInterfaceMyNeighborIpAddress | 1.3.6.1.2.1.37.1.2.1.11 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can send SNMP messages, as IP datagrams sent to UDP port 161, in order to access network management information concerning the operation of that system. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system. | |||||||||||||
| CatmInterfaceMyNeighborIfName | 1.3.6.1.2.1.37.1.2.1.12 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects. If the neighbor system is manageable through SNMP and supports the object ifName, the value of this object must be identical with that of ifName for the ifEntry of the lowest level physical interface for this port. If this interface does not have a textual name, the value of this object is a zero length string. Note that the value of this object may be obtained in different ways, e.g., by manual configuration, or through ILMI interaction with the neighbor system. | |||||||||||||
| CatmInterfaceCurrentMaxVpiBits | 1.3.6.1.2.1.37.1.2.1.13 | INTEGER (0..12) | RO | ||||||||||
column · INTEGER (0..12) · read-only · current The maximum number of VPI Bits that may currently be used at this ATM interface. The value is the minimum of atmInterfaceMaxActiveVpiBits, and the atmInterfaceMaxActiveVpiBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VPI Bits that can be used on the interface, then the value of this object must equal atmInterfaceMaxActiveVpiBits. | |||||||||||||
| CatmInterfaceCurrentMaxVciBits | 1.3.6.1.2.1.37.1.2.1.14 | INTEGER (0..16) | RO | ||||||||||
column · INTEGER (0..16) · read-only · current The maximum number of VCI Bits that may currently be used at this ATM interface. The value is the minimum of atmInterfaceMaxActiveVciBits, and the atmInterfaceMaxActiveVciBits of the interface's UNI/NNI peer. If the interface does not negotiate with its peer to determine the number of VCI Bits that can be used on the interface, then the value of this object must equal atmInterfaceMaxActiveVciBits. | |||||||||||||
| CatmInterfaceSubscrAddress | 1.3.6.1.2.1.37.1.2.1.15 | AtmAddr | RW | ||||||||||
column · AtmAddr · read-write · current The identifier assigned by a service provider to the network side of a public network UNI. If this interface has no assigned service provider address, or for other interfaces this is an octet string of zero length. | |||||||||||||
| TatmInterfaceDs3PlcpTable | 1.3.6.1.2.1.37.1.3 | NA | |||||||||||
table · not-accessible · current This table contains ATM interface DS3 PLCP parameters and state variables, one entry per ATM interface port. | |||||||||||||
| RatmInterfaceDs3PlcpEntry | 1.3.6.1.2.1.37.1.3.1 | NA | |||||||||||
row · not-accessible · current This list contains DS3 PLCP parameters and state variables at the ATM interface and is indexed by the ifIndex value of the ATM interface.
| |||||||||||||
| CatmInterfaceDs3PlcpSEFSs | 1.3.6.1.2.1.37.1.3.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of DS3 PLCP Severely Errored Framing Seconds (SEFS). Each SEFS represents a one-second interval which contains one or more SEF events. | |||||||||||||
| CatmInterfaceDs3PlcpAlarmState | 1.3.6.1.2.1.37.1.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS3 PLCP has declared a loss of frame (LOF) failure condition, and the value noAlarm means that there are no alarms present. Transition from the failure to the no alarm state occurs when no defects (e.g., LOF) are received for more than 10 seconds.
| |||||||||||||
| CatmInterfaceDs3PlcpUASs | 1.3.6.1.2.1.37.1.3.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The counter associated with the number of Unavailable Seconds encountered by the PLCP. | |||||||||||||
| TatmInterfaceTCTable | 1.3.6.1.2.1.37.1.4 | NA | |||||||||||
table · not-accessible · current This table contains ATM interface TC Sublayer parameters and state variables, one entry per ATM interface port. | |||||||||||||
| RatmInterfaceTCEntry | 1.3.6.1.2.1.37.1.4.1 | NA | |||||||||||
row · not-accessible · current This list contains TC Sublayer parameters and state variables at the ATM interface and is indexed by the ifIndex value of the ATM interface.
| |||||||||||||
| CatmInterfaceOCDEvents | 1.3.6.1.2.1.37.1.4.1.1 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of times the Out of Cell Delineation (OCD) events occur. If seven consecutive ATM cells have Header Error Control (HEC) violations, an OCD event occurs. A high number of OCD events may indicate a problem with the TC Sublayer. | |||||||||||||
| CatmInterfaceTCAlarmState | 1.3.6.1.2.1.37.1.4.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable indicates if there is an alarm present for the TC Sublayer. The value lcdFailure(2) indicates that the TC Sublayer is currently in the Loss of Cell Delineation (LCD) defect maintenance state. The value noAlarm(1) indicates that the TC Sublayer is currently not in the LCD defect maintenance state.
| |||||||||||||
| TatmTrafficDescrParamTable | 1.3.6.1.2.1.37.1.5 | NA | |||||||||||
table · not-accessible · current This table contains information on ATM traffic descriptor type and the associated parameters. | |||||||||||||
| RatmTrafficDescrParamEntry | 1.3.6.1.2.1.37.1.5.1 | NA | |||||||||||
row · not-accessible · current This list contains ATM traffic descriptor type and the associated parameters. | |||||||||||||
| CatmTrafficDescrParamIndex | 1.3.6.1.2.1.37.1.5.1.1 | AtmTrafficDescrParamIndex (1..2147483647) | NA | ||||||||||
column · AtmTrafficDescrParamIndex (1..2147483647) · not-accessible · current This object is used by the virtual link table (i.e., VPL or VCL table) to identify the row of this table. When creating a new row in the table the value of this index may be obtained by retrieving the value of atmTrafficDescrParamIndexNext. | |||||||||||||
| CatmTrafficDescrType | 1.3.6.1.2.1.37.1.5.1.2 | OBJECT IDENTIFIER | RC | 1.3.6.1.2.1.37.1.1.1 | |||||||||
column · OBJECT IDENTIFIER · read-create · current The value of this object identifies the type
of ATM traffic descriptor.
The type may indicate no traffic descriptor or
traffic descriptor with one or more parameters.
These parameters are specified as a parameter
vector, in the corresponding instances of the
objects:
atmTrafficDescrParam1
atmTrafficDescrParam2
atmTrafficDescrParam3
atmTrafficDescrParam4
atmTrafficDescrParam5.Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficDescrParam1 | 1.3.6.1.2.1.37.1.5.1.3 | Integer32 | RC | 0 | |||||||||
column · Integer32 · read-create · current The first parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficDescrParam2 | 1.3.6.1.2.1.37.1.5.1.4 | Integer32 | RC | 0 | |||||||||
column · Integer32 · read-create · current The second parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficDescrParam3 | 1.3.6.1.2.1.37.1.5.1.5 | Integer32 | RC | 0 | |||||||||
column · Integer32 · read-create · current The third parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficDescrParam4 | 1.3.6.1.2.1.37.1.5.1.6 | Integer32 | RC | 0 | |||||||||
column · Integer32 · read-create · current The fourth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficDescrParam5 | 1.3.6.1.2.1.37.1.5.1.7 | Integer32 | RC | 0 | |||||||||
column · Integer32 · read-create · current The fifth parameter of the ATM traffic descriptor used according to the value of atmTrafficDescrType. Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficQoSClass | 1.3.6.1.2.1.37.1.5.1.8 | INTEGER (0..255) | RC | deprecated | 0 | ||||||||
column · INTEGER (0..255) · read-create · deprecated The value of this object identifies the QoS Class.
Four Service classes have been
specified in the ATM Forum UNI Specification:
Service Class A: Constant bit rate video and
Circuit emulation
Service Class B: Variable bit rate video/audio
Service Class C: Connection-oriented data
Service Class D: Connectionless data
Four QoS classes numbered 1, 2, 3, and 4 have
been specified with the aim to support service
classes A, B, C, and D respectively.
An unspecified QoS Class numbered `0' is used
for best effort traffic.Example values from LibreNMS test devices
| |||||||||||||
| CatmTrafficDescrRowStatus | 1.3.6.1.2.1.37.1.5.1.9 | RowStatus | RC | 1 | |||||||||
column · RowStatus · read-create · current This object is used to create a new row or modify or delete an existing row in this table. Example values from LibreNMS test devices
| |||||||||||||
| CatmServiceCategory | 1.3.6.1.2.1.37.1.5.1.10 | AtmServiceCategory | RC | ||||||||||
column · AtmServiceCategory · read-create · current The ATM service category. | |||||||||||||
| CatmTrafficFrameDiscard | 1.3.6.1.2.1.37.1.5.1.11 | TruthValue | RC | ||||||||||
column · TruthValue · read-create · current If set to 'true', this object indicates that the network is requested to treat data for this connection, in the given direction, as frames (e.g. AAL5 CPCS_PDU's) rather than as individual cells. While the precise implementation is network-specific, this treatment may for example involve discarding entire frames during congestion, rather than a few cells from many frames. | |||||||||||||
| TatmVplTable | 1.3.6.1.2.1.37.1.6 | NA | |||||||||||
table · not-accessible · current The Virtual Path Link (VPL) table. A bi-directional VPL is modeled as one entry in this table. This table can be used for PVCs, SVCs and Soft PVCs. Entries are not present in this table for the VPIs used by entries in the atmVclTable. | |||||||||||||
| RatmVplEntry | 1.3.6.1.2.1.37.1.6.1 | NA | |||||||||||
row · not-accessible · current An entry in the VPL table. This entry is
used to model a bi-directional VPL.
To create a VPL at an ATM interface,
either of the following procedures are used:
Negotiated VPL establishment
(1) The management application creates
a VPL entry in the atmVplTable
by setting atmVplRowStatus to createAndWait(5).
This may fail for the following reasons:
- The selected VPI value is unavailable,
- The selected VPI value is in use.
Otherwise, the agent creates a row and
reserves the VPI value on that port.
(2) The manager selects an existing row(s) in the
atmTrafficDescrParamTable,
thereby, selecting a set of self-consistent
ATM traffic parameters and the service category
for receive and transmit directions of the VPL.
(2a) If no suitable row(s) in the
atmTrafficDescrParamTable exists,
the manager must create a new row(s)
in that table.
(2b) The manager characterizes the VPL's traffic
parameters through setting the
atmVplReceiveTrafficDescrIndex and the
atmVplTransmitTrafficDescrIndex values
in the VPL table, which point to the rows
containing desired ATM traffic parameter values
in the atmTrafficDescrParamTable. The agent
will check the availability of resources and
may refuse the request.
If the transmit and receive service categories
are inconsistent, the agent should refuse the
request.
(3) The manager activates the VPL by setting the
the atmVplRowStatus to active(1).
If this set is successful, the agent has
reserved the resources to satisfy the requested
traffic parameter values and the service category
for that VPL.
(4) If the VPL terminates a VPC in the ATM host
or switch, the manager turns on the
atmVplAdminStatus to up(1) to turn the VPL
traffic flow on. Otherwise, the
atmVpCrossConnectTable must be used
to cross-connect the VPL to another VPL(s)
in an ATM switch or network.
One-Shot VPL Establishment
A VPL may also be established in one step by a
set-request with all necessary VPL parameter
values and atmVplRowStatus set to createAndGo(4).
In contrast to the negotiated VPL establishment
which allows for detailed error checking
(i.e., set errors are explicitly linked to
particular resource acquisition failures),
the one-shot VPL establishment
performs the setup on one operation but
does not have the advantage of step-wise
error checking.
VPL Retirement
A VPL is released by setting atmVplRowStatus to
destroy(6), and the agent may release all
associated resources. | |||||||||||||
| CatmVplVpi | 1.3.6.1.2.1.37.1.6.1.1 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value of the VPL. | |||||||||||||
| CatmVplAdminStatus | 1.3.6.1.2.1.37.1.6.1.2 | AtmVorXAdminStatus | RC | ||||||||||
column · AtmVorXAdminStatus · read-create · current This object is instanciated only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired administrative state of the VPL. | |||||||||||||
| CatmVplOperStatus | 1.3.6.1.2.1.37.1.6.1.3 | AtmVorXOperStatus | RO | ||||||||||
column · AtmVorXOperStatus · read-only · current The current operational status of the VPL. | |||||||||||||
| CatmVplLastChange | 1.3.6.1.2.1.37.1.6.1.4 | AtmVorXLastChange | RO | ||||||||||
column · AtmVorXLastChange · read-only · current The value of sysUpTime at the time this VPL entered its current operational state. | |||||||||||||
| CatmVplReceiveTrafficDescrIndex | 1.3.6.1.2.1.37.1.6.1.5 | AtmTrafficDescrParamIndex | RC | ||||||||||
column · AtmTrafficDescrParamIndex · read-create · current The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the receive direction of the VPL. | |||||||||||||
| CatmVplTransmitTrafficDescrIndex | 1.3.6.1.2.1.37.1.6.1.6 | AtmTrafficDescrParamIndex | RC | ||||||||||
column · AtmTrafficDescrParamIndex · read-create · current The value of this object identifies the row in the atmTrafficDescrParamTable which applies to the transmit direction of the VPL. | |||||||||||||
| CatmVplCrossConnectIdentifier | 1.3.6.1.2.1.37.1.6.1.7 | INTEGER (0..2147483647) | RO | ||||||||||
column · INTEGER (0..2147483647) · read-only · current This object is instantiated only for a VPL which is cross-connected to other VPLs that belong to the same VPC. All such associated VPLs have the same value of this object, and all their cross-connections are identified either by entries that are indexed by the same value of atmVpCrossConnectIndex in the atmVpCrossConnectTable of this MIB module or by the same value of the cross-connect index in the cross-connect table for SVCs and Soft PVCs (defined in a separate MIB module). At no time should entries in these respective cross-connect tables exist simultaneously with the same cross-connect index value. The value of this object is initialized by the agent after the associated entries in the atmVpCrossConnectTable have been created. | |||||||||||||
| CatmVplRowStatus | 1.3.6.1.2.1.37.1.6.1.8 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object should not be set to 'active' unless the following columnar objects have been set to their desired value in this row: atmVplReceiveTrafficDescrIndex and atmVplTransmitTrafficDescrIndex. The DESCRIPTION of atmVplEntry provides further guidance to row treatment in this table. | |||||||||||||
| CatmVplCastType | 1.3.6.1.2.1.37.1.6.1.9 | AtmConnCastType | RC | ||||||||||
column · AtmConnCastType · read-create · current The connection topology type. | |||||||||||||
| CatmVplConnKind | 1.3.6.1.2.1.37.1.6.1.10 | AtmConnKind | RC | ||||||||||
column · AtmConnKind · read-create · current The use of call control. | |||||||||||||
| TatmVclTable | 1.3.6.1.2.1.37.1.7 | NA | |||||||||||
table · not-accessible · current The Virtual Channel Link (VCL) table. A bi-directional VCL is modeled as one entry in this table. This table can be used for PVCs, SVCs and Soft PVCs. | |||||||||||||
| RatmVclEntry | 1.3.6.1.2.1.37.1.7.1 | NA | |||||||||||
row · not-accessible · current An entry in the VCL table. This entry is
used to model a bi-directional VCL.
To create a VCL at an ATM interface,
either of the following procedures are used:
Negotiated VCL establishment
(1) The management application creates
a VCL entry in the atmVclTable
by setting atmVclRowStatus to createAndWait(5).
This may fail for the following reasons:
- The selected VPI/VCI values are unavailable,
- The selected VPI/VCI values are in use.
Otherwise, the agent creates a row and
reserves the VPI/VCI values on that port.
(2) The manager selects an existing row(s) in the
atmTrafficDescrParamTable,
thereby, selecting a set of self-consistent
ATM traffic parameters and the service category
for receive and transmit directions of the VCL.
(2a) If no suitable row(s) in the
atmTrafficDescrParamTable exists,
the manager must create a new row(s)
in that table.
(2b) The manager characterizes the VCL's traffic
parameters through setting the
atmVclReceiveTrafficDescrIndex and the
atmVclTransmitTrafficDescrIndex values
in the VCL table, which point to the rows
containing desired ATM traffic parameter values
in the atmTrafficDescrParamTable. The agent
will check the availability of resources and
may refuse the request.
If the transmit and receive service categories
are inconsistent, the agent should refuse the
request.
(3) The manager activates the VCL by setting the
the atmVclRowStatus to active(1) (for
requirements on this activation see the
description of atmVclRowStatus).
If this set is successful, the agent has
reserved the resources to satisfy the requested
traffic parameter values and the service category
for that VCL.
(4) If the VCL terminates a VCC in the ATM host
or switch, the manager turns on the
atmVclAdminStatus to up(1) to turn the VCL
traffic flow on. Otherwise, the
atmVcCrossConnectTable must be used
to cross-connect the VCL to another VCL(s)
in an ATM switch or network.
One-Shot VCL Establishment
A VCL may also be established in one step by a
set-request with all necessary VCL parameter
values and atmVclRowStatus set to createAndGo(4).
In contrast to the negotiated VCL establishment
which allows for detailed error checking
(i.e., set errors are explicitly linked to
particular resource acquisition failures),
the one-shot VCL establishment
performs the setup on one operation but
does not have the advantage of step-wise
error checking.
VCL Retirement
A VCL is released by setting atmVclRowStatus to
destroy(6), and the agent may release all
associated resources. | |||||||||||||
| CatmVclVpi | 1.3.6.1.2.1.37.1.7.1.1 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value of the VCL. | |||||||||||||
| CatmVclVci | 1.3.6.1.2.1.37.1.7.1.2 | AtmVcIdentifier | NA | ||||||||||
column · AtmVcIdentifier · not-accessible · current The VCI value of the VCL. | |||||||||||||
| CatmVclAdminStatus | 1.3.6.1.2.1.37.1.7.1.3 | AtmVorXAdminStatus | RC | ||||||||||
column · AtmVorXAdminStatus · read-create · current This object is instanciated only for a VCL which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). Its value specifies the desired administrative state of the VCL. | |||||||||||||
| CatmVclOperStatus | 1.3.6.1.2.1.37.1.7.1.4 | AtmVorXOperStatus | RO | ||||||||||
column · AtmVorXOperStatus · read-only · current The current operational status of the VCL. | |||||||||||||
| CatmVclLastChange | 1.3.6.1.2.1.37.1.7.1.5 | AtmVorXLastChange | RO | ||||||||||
column · AtmVorXLastChange · read-only · current The value of sysUpTime at the time this VCL entered its current operational state. | |||||||||||||
| CatmVclReceiveTrafficDescrIndex | 1.3.6.1.2.1.37.1.7.1.6 | AtmTrafficDescrParamIndex | RC | ||||||||||
column · AtmTrafficDescrParamIndex · read-create · current The value of this object identifies the row in the ATM Traffic Descriptor Table which applies to the receive direction of this VCL. | |||||||||||||
| CatmVclTransmitTrafficDescrIndex | 1.3.6.1.2.1.37.1.7.1.7 | AtmTrafficDescrParamIndex | RC | ||||||||||
column · AtmTrafficDescrParamIndex · read-create · current The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL. | |||||||||||||
| CatmVccAalType | 1.3.6.1.2.1.37.1.7.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL is in use. The type of AAL used on this VCC. The AAL type includes AAL1, AAL2, AAL3/4, and AAL5. The other(4) may be user-defined AAL type. The unknown type indicates that the AAL type cannot be determined.
| |||||||||||||
| CatmVccAal5CpcsTransmitSduSize | 1.3.6.1.2.1.37.1.7.1.9 | INTEGER (1..65535) | RC | ||||||||||
column · INTEGER (1..65535) · read-create · current An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the transmit direction of this VCC. | |||||||||||||
| CatmVccAal5CpcsReceiveSduSize | 1.3.6.1.2.1.37.1.7.1.10 | INTEGER (1..65535) | RC | ||||||||||
column · INTEGER (1..65535) · read-create · current An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The maximum AAL5 CPCS SDU size in octets that is supported on the receive direction of this VCC. | |||||||||||||
| CatmVccAal5EncapsType | 1.3.6.1.2.1.37.1.7.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current An instance of this object only exists when the local VCL end-point is also the VCC end-point, and AAL5 is in use. The type of data encapsulation used over the AAL5 SSCS layer. The definitions reference RFC 1483 Multiprotocol Encapsulation over ATM AAL5 and to the ATM Forum LAN Emulation specification.
| |||||||||||||
| CatmVclCrossConnectIdentifier | 1.3.6.1.2.1.37.1.7.1.12 | INTEGER (0..2147483647) | RO | ||||||||||
column · INTEGER (0..2147483647) · read-only · current This object is instantiated only for a VCL which is cross-connected to other VCLs that belong to the same VCC. All such associated VCLs have the same value of this object, and all their cross-connections are identified either by entries that are indexed by the same value of atmVcCrossConnectIndex in the atmVcCrossConnectTable of this MIB module or by the same value of the cross-connect index in the cross-connect table for SVCs and Soft PVCs (defined in a separate MIB module). At no time should entries in these respective cross-connect tables exist simultaneously with the same cross-connect index value. The value of this object is initialized by the agent after the associated entries in the atmVcCrossConnectTable have been created. | |||||||||||||
| CatmVclRowStatus | 1.3.6.1.2.1.37.1.7.1.13 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object should not be set to 'active' unless the following columnar objects have been set to their desired value in this row: atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex. In addition, if the local VCL end-point is also the VCC end-point: atmVccAalType. In addition, for AAL5 connections only: atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, and atmVccAal5EncapsType. (The existence of these objects imply the AAL connection type.). The DESCRIPTION of atmVclEntry provides further guidance to row treatment in this table. | |||||||||||||
| CatmVclCastType | 1.3.6.1.2.1.37.1.7.1.14 | AtmConnCastType | RC | ||||||||||
column · AtmConnCastType · read-create · current The connection topology type. | |||||||||||||
| CatmVclConnKind | 1.3.6.1.2.1.37.1.7.1.15 | AtmConnKind | RC | ||||||||||
column · AtmConnKind · read-create · current The use of call control. | |||||||||||||
| SatmVpCrossConnectIndexNext | 1.3.6.1.2.1.37.1.8 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current This object contains an appropriate value to be used for atmVpCrossConnectIndex when creating entries in the atmVpCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the atmVpCrossConnectIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | |||||||||||||
| TatmVpCrossConnectTable | 1.3.6.1.2.1.37.1.9 | NA | |||||||||||
table · not-accessible · current The ATM VP Cross Connect table for PVCs. An entry in this table models two cross-connected VPLs. Each VPL must have its atmConnKind set to pvc(1). | |||||||||||||
| RatmVpCrossConnectEntry | 1.3.6.1.2.1.37.1.9.1 | NA | |||||||||||
row · not-accessible · current An entry in the ATM VP Cross Connect table.
This entry is used to model a bi-directional
ATM VP cross-connect which cross-connects
two VPLs.
Step-wise Procedures to set up a VP Cross-connect
Once the entries in the atmVplTable are created,
the following procedures are used
to cross-connect the VPLs together.
(1) The manager obtains a unique
atmVpCrossConnectIndex by reading the
atmVpCrossConnectIndexNext object.
(2) Next, the manager creates a set of one
or more rows in the ATM VP Cross Connect
Table, one for each cross-connection between
two VPLs. Each row is indexed by the ATM
interface port numbers and VPI values of the
two ends of that cross-connection.
This set of rows specifies the topology of the
VPC cross-connect and is identified by a single
value of atmVpCrossConnectIndex.
Negotiated VP Cross-Connect Establishment
(2a) The manager creates a row in this table by
setting atmVpCrossConnectRowStatus to
createAndWait(5). The agent checks the
requested topology and the mutual sanity of
the ATM traffic parameters and
service categories, i.e., the row creation
fails if:
- the requested topology is incompatible with
associated values of atmVplCastType,
- the requested topology is not supported
by the agent,
- the traffic/service category parameter values
associated with the requested row are
incompatible with those of already existing
rows for this VP cross-connect.
[For example, for setting up
a point-to-point VP cross-connect, the
ATM traffic parameters in the receive direction
of a VPL at the low end of the cross-connect
must equal to the traffic parameters in the
transmit direction of the other VPL at the
high end of the cross-connect,
otherwise, the row creation fails.]
The agent also checks for internal errors
in building the cross-connect.
The atmVpCrossConnectIndex values in the
corresponding atmVplTable rows are filled
in by the agent at this point.
(2b) The manager promotes the row in the
atmVpCrossConnectTable by setting
atmVpCrossConnectRowStatus to active(1). If
this set is successful, the agent has reserved
the resources specified by the ATM traffic
parameter and Service category values
for each direction of the VP cross-connect
in an ATM switch or network.
(3) The manager sets the
atmVpCrossConnectAdminStatus to up(1) in all
rows of this VP cross-connect to turn the
traffic flow on.
One-Shot VP Cross-Connect Establishment
A VP cross-connect may also be established in
one step by a set-request with all necessary
parameter values and atmVpCrossConnectRowStatus
set to createAndGo(4).
In contrast to the negotiated VP cross-connect
establishment which allows for detailed error
checking (i.e., set errors are explicitly linked
to particular resource acquisition failures),
the one-shot VP cross-connect establishment
performs the setup on one operation but does not
have the advantage of step-wise error checking.
VP Cross-Connect Retirement
A VP cross-connect identified by a particular
value of atmVpCrossConnectIndex is released by:
(1) Setting atmVpCrossConnectRowStatus of all
rows identified by this value of
atmVpCrossConnectIndex to destroy(6).
The agent may release all
associated resources, and the
atmVpCrossConnectIndex values in the
corresponding atmVplTable row are removed.
Note that a situation when only a subset of
the associated rows are deleted corresponds
to a VP topology change.
(2) After deletion of the appropriate
atmVpCrossConnectEntries, the manager may
set atmVplRowStatus to destroy(6) the
associated VPLs. The agent releases
the resources and removes the associated
rows in the atmVplTable.
VP Cross-connect Reconfiguration
At the discretion of the agent, a VP
cross-connect may be reconfigured by
adding and/or deleting leafs to/from
the VP topology as per the VP cross-connect
establishment/retirement procedures.
Reconfiguration of traffic/service category parameter
values requires release of the VP cross-connect
before those parameter values may by changed
for individual VPLs. | |||||||||||||
| CatmVpCrossConnectIndex | 1.3.6.1.2.1.37.1.9.1.1 | INTEGER (1..2147483647) | NA | ||||||||||
column · INTEGER (1..2147483647) · not-accessible · current A unique value to identify this VP cross-connect. For each VPL associated with this cross-connect, the agent reports this cross-connect index value in the atmVplCrossConnectIdentifier attribute of the corresponding atmVplTable entries. | |||||||||||||
| CatmVpCrossConnectLowIfIndex | 1.3.6.1.2.1.37.1.9.1.2 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value of the ATM interface for this VP cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same atmVpCrossConnectEntry. | |||||||||||||
| CatmVpCrossConnectLowVpi | 1.3.6.1.2.1.37.1.9.1.3 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectLowIfIndex. | |||||||||||||
| CatmVpCrossConnectHighIfIndex | 1.3.6.1.2.1.37.1.9.1.4 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value of the ATM interface for this VP cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM interface identified in the same atmVpCrossConnectEntry. | |||||||||||||
| CatmVpCrossConnectHighVpi | 1.3.6.1.2.1.37.1.9.1.5 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value at the ATM interface associated with the VP cross-connect that is identified by atmVpCrossConnectHighIfIndex. | |||||||||||||
| CatmVpCrossConnectAdminStatus | 1.3.6.1.2.1.37.1.9.1.6 | AtmVorXAdminStatus | RC | ||||||||||
column · AtmVorXAdminStatus · read-create · current The desired administrative status of this bi-directional VP cross-connect. | |||||||||||||
| CatmVpCrossConnectL2HOperStatus | 1.3.6.1.2.1.37.1.9.1.7 | AtmVorXOperStatus | RO | ||||||||||
column · AtmVorXOperStatus · read-only · current The operational status of the VP cross-connect in one direction; (i.e., from the low to high direction). | |||||||||||||
| CatmVpCrossConnectH2LOperStatus | 1.3.6.1.2.1.37.1.9.1.8 | AtmVorXOperStatus | RO | ||||||||||
column · AtmVorXOperStatus · read-only · current The operational status of the VP cross-connect in one direction; (i.e., from the high to low direction). | |||||||||||||
| CatmVpCrossConnectL2HLastChange | 1.3.6.1.2.1.37.1.9.1.9 | AtmVorXLastChange | RO | ||||||||||
column · AtmVorXLastChange · read-only · current The value of sysUpTime at the time this VP cross-connect entered its current operational state in the low to high direction. | |||||||||||||
| CatmVpCrossConnectH2LLastChange | 1.3.6.1.2.1.37.1.9.1.10 | AtmVorXLastChange | RO | ||||||||||
column · AtmVorXLastChange · read-only · current The value of sysUpTime at the time this VP cross-connect entered its current operational in the high to low direction. | |||||||||||||
| CatmVpCrossConnectRowStatus | 1.3.6.1.2.1.37.1.9.1.11 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this entry in the atmVpCrossConnectTable. This object is used to create a cross-connect for cross-connecting VPLs which are created using the atmVplTable or to change or delete an existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. To turn on a VP cross-connect, the atmVpCrossConnectAdminStatus is set to `up'. | |||||||||||||
| SatmVcCrossConnectIndexNext | 1.3.6.1.2.1.37.1.10 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current This object contains an appropriate value to be used for atmVcCrossConnectIndex when creating entries in the atmVcCrossConnectTable. The value 0 indicates that no unassigned entries are available. To obtain the atmVcCrossConnectIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | |||||||||||||
| TatmVcCrossConnectTable | 1.3.6.1.2.1.37.1.11 | NA | |||||||||||
table · not-accessible · current The ATM VC Cross Connect table for PVCs. An entry in this table models two cross-connected VCLs. Each VCL must have its atmConnKind set to pvc(1). | |||||||||||||
| RatmVcCrossConnectEntry | 1.3.6.1.2.1.37.1.11.1 | NA | |||||||||||
row · not-accessible · current An entry in the ATM VC Cross Connect table.
This entry is used to model a bi-directional ATM
VC cross-connect cross-connecting two end points.
Step-wise Procedures to set up a VC Cross-connect
Once the entries in the atmVclTable are created,
the following procedures are used
to cross-connect the VCLs together to
form a VCC segment.
(1) The manager obtains a unique
atmVcCrossConnectIndex by reading the
atmVcCrossConnectIndexNext object.
(2) Next, the manager creates a set of one
or more rows in the ATM VC Cross Connect
Table, one for each cross-connection between
two VCLs. Each row is indexed by the ATM
interface port numbers and VPI/VCI values of
the two ends of that cross-connection.
This set of rows specifies the topology of the
VCC cross-connect and is identified by a single
value of atmVcCrossConnectIndex.
Negotiated VC Cross-Connect Establishment
(2a) The manager creates a row in this table by
setting atmVcCrossConnectRowStatus to
createAndWait(5). The agent checks the
requested topology and the mutual sanity of
the ATM traffic parameters and
service categories, i.e., the row creation
fails if:
- the requested topology is incompatible with
associated values of atmVclCastType,
- the requested topology is not supported
by the agent,
- the traffic/service category parameter values
associated with the requested row are
incompatible with those of already existing
rows for this VC cross-connect.
[For example, for setting up
a point-to-point VC cross-connect, the
ATM traffic parameters in the receive direction
of a VCL at the low end of the cross-connect
must equal to the traffic parameters in the
transmit direction of the other VCL at the
high end of the cross-connect,
otherwise, the row creation fails.]
The agent also checks for internal errors
in building the cross-connect.
The atmVcCrossConnectIndex values in the
corresponding atmVclTable rows are filled
in by the agent at this point.
(2b) The manager promotes the row in the
atmVcCrossConnectTable by setting
atmVcCrossConnectRowStatus to active(1). If
this set is successful, the agent has reserved
the resources specified by the ATM traffic
parameter and Service category values
for each direction of the VC cross-connect
in an ATM switch or network.
(3) The manager sets the
atmVcCrossConnectAdminStatus to up(1)
in all rows of this VC cross-connect to
turn the traffic flow on.
One-Shot VC Cross-Connect Establishment
A VC cross-connect may also be established in
one step by a set-request with all necessary
parameter values and atmVcCrossConnectRowStatus
set to createAndGo(4).
In contrast to the negotiated VC cross-connect
establishment which allows for detailed error
checking i.e., set errors are explicitly linked to
particular resource acquisition failures), the
one-shot VC cross-connect establishment
performs the setup on one operation but does
not have the advantage of step-wise error
checking.
VC Cross-Connect Retirement
A VC cross-connect identified by a particular
value of atmVcCrossConnectIndex is released by:
(1) Setting atmVcCrossConnectRowStatus of all rows
identified by this value of
atmVcCrossConnectIndex to destroy(6).
The agent may release all
associated resources, and the
atmVcCrossConnectIndex values in the
corresponding atmVclTable row are removed.
Note that a situation when only a subset of
the associated rows are deleted corresponds
to a VC topology change.
(2) After deletion of the appropriate
atmVcCrossConnectEntries, the manager may
set atmVclRowStatus to destroy(6) the
associated VCLs. The agent releases
the resources and removes the associated
rows in the atmVclTable.
VC Cross-Connect Reconfiguration
At the discretion of the agent, a VC
cross-connect may be reconfigured by
adding and/or deleting leafs to/from
the VC topology as per the VC cross-connect
establishment/retirement procedures.
Reconfiguration of traffic/service category parameter
values requires release of the VC cross-connect
before those parameter values may by changed
for individual VCLs. | |||||||||||||
| CatmVcCrossConnectIndex | 1.3.6.1.2.1.37.1.11.1.1 | INTEGER (1..2147483647) | NA | ||||||||||
column · INTEGER (1..2147483647) · not-accessible · current A unique value to identify this VC cross-connect. For each VCL associated with this cross-connect, the agent reports this cross-connect index value in the atmVclCrossConnectIdentifier attribute of the corresponding atmVclTable entries. | |||||||||||||
| CatmVcCrossConnectLowIfIndex | 1.3.6.1.2.1.37.1.11.1.2 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value of the ATM interface for this VC cross-connect. The term low implies that this ATM interface has the numerically lower ifIndex value than the other ATM interface identified in the same atmVcCrossConnectEntry. | |||||||||||||
| CatmVcCrossConnectLowVpi | 1.3.6.1.2.1.37.1.11.1.3 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectLowIfIndex. | |||||||||||||
| CatmVcCrossConnectLowVci | 1.3.6.1.2.1.37.1.11.1.4 | AtmVcIdentifier | NA | ||||||||||
column · AtmVcIdentifier · not-accessible · current The VCI value at the ATM interface associated with this VC cross-connect that is identified by atmVcCrossConnectLowIfIndex. | |||||||||||||
| CatmVcCrossConnectHighIfIndex | 1.3.6.1.2.1.37.1.11.1.5 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The ifIndex value for the ATM interface for this VC cross-connect. The term high implies that this ATM interface has the numerically higher ifIndex value than the other ATM interface identified in the same atmVcCrossConnectEntry. | |||||||||||||
| CatmVcCrossConnectHighVpi | 1.3.6.1.2.1.37.1.11.1.6 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex. | |||||||||||||
| CatmVcCrossConnectHighVci | 1.3.6.1.2.1.37.1.11.1.7 | AtmVcIdentifier | NA | ||||||||||
column · AtmVcIdentifier · not-accessible · current The VCI value at the ATM interface associated with the VC cross-connect that is identified by atmVcCrossConnectHighIfIndex. | |||||||||||||
| CatmVcCrossConnectAdminStatus | 1.3.6.1.2.1.37.1.11.1.8 | AtmVorXAdminStatus | RC | ||||||||||
column · AtmVorXAdminStatus · read-create · current The desired administrative status of this bi-directional VC cross-connect. | |||||||||||||
| CatmVcCrossConnectL2HOperStatus | 1.3.6.1.2.1.37.1.11.1.9 | AtmVorXOperStatus | RO | ||||||||||
column · AtmVorXOperStatus · read-only · current The current operational status of the VC cross-connect in one direction; (i.e., from the low to high direction). | |||||||||||||
| CatmVcCrossConnectH2LOperStatus | 1.3.6.1.2.1.37.1.11.1.10 | AtmVorXOperStatus | RO | ||||||||||
column · AtmVorXOperStatus · read-only · current The current operational status of the VC cross-connect in one direction; (i.e., from the high to low direction). | |||||||||||||
| CatmVcCrossConnectL2HLastChange | 1.3.6.1.2.1.37.1.11.1.11 | AtmVorXLastChange | RO | ||||||||||
column · AtmVorXLastChange · read-only · current The value of sysUpTime at the time this VC cross-connect entered its current operational state in low to high direction. | |||||||||||||
| CatmVcCrossConnectH2LLastChange | 1.3.6.1.2.1.37.1.11.1.12 | AtmVorXLastChange | RO | ||||||||||
column · AtmVorXLastChange · read-only · current The value of sysUpTime at the time this VC cross-connect entered its current operational state in high to low direction. | |||||||||||||
| CatmVcCrossConnectRowStatus | 1.3.6.1.2.1.37.1.11.1.13 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this entry in the atmVcCrossConnectTable. This object is used to create a new cross-connect for cross-connecting VCLs which are created using the atmVclTable or to change or delete existing cross-connect. This object must be initially set to `createAndWait' or 'createAndGo'. To turn on a VC cross-connect, the atmVcCrossConnectAdminStatus is set to `up'. | |||||||||||||
| Taal5VccTable | 1.3.6.1.2.1.37.1.12 | NA | |||||||||||
table · not-accessible · current This table contains AAL5 VCC performance parameters. | |||||||||||||
| Raal5VccEntry | 1.3.6.1.2.1.37.1.12.1 | NA | |||||||||||
row · not-accessible · current This list contains the AAL5 VCC performance parameters and is indexed by ifIndex values of AAL5 interfaces and the associated VPI/VCI values.
| |||||||||||||
| Caal5VccVpi | 1.3.6.1.2.1.37.1.12.1.1 | AtmVpIdentifier | NA | ||||||||||
column · AtmVpIdentifier · not-accessible · current The VPI value of the AAL5 VCC at the interface identified by the ifIndex. | |||||||||||||
| Caal5VccVci | 1.3.6.1.2.1.37.1.12.1.2 | AtmVcIdentifier | NA | ||||||||||
column · AtmVcIdentifier · not-accessible · current The VCI value of the AAL5 VCC at the interface identified by the ifIndex. | |||||||||||||
| Caal5VccCrcErrors | 1.3.6.1.2.1.37.1.12.1.3 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of AAL5 CPCS PDUs received with CRC-32 errors on this AAL5 VCC at the interface associated with an AAL5 entity. | |||||||||||||
| Caal5VccSarTimeOuts | 1.3.6.1.2.1.37.1.12.1.4 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of partially re-assembled AAL5 CPCS PDUs which were discarded on this AAL5 VCC at the interface associated with an AAL5 entity because they were not fully re-assembled within the required time period. If the re-assembly timer is not supported, then this object contains a zero value. | |||||||||||||
| Caal5VccOverSizedSDUs | 1.3.6.1.2.1.37.1.12.1.5 | Counter32 | RO | ||||||||||
column · Counter32 · read-only · current The number of AAL5 CPCS PDUs discarded on this AAL5 VCC at the interface associated with an AAL5 entity because the AAL5 SDUs were too large. | |||||||||||||
| SatmTrafficDescrParamIndexNext | 1.3.6.1.2.1.37.1.13 | INTEGER (0..2147483647) | RO | ||||||||||
scalar · INTEGER (0..2147483647) · read-only · current This object contains an appropriate value to be used for atmTrafficDescrParamIndex when creating entries in the atmTrafficDescrParamTable. The value 0 indicates that no unassigned entries are available. To obtain the atmTrafficDescrParamIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse. | |||||||||||||
| NatmMIBConformance | 1.3.6.1.2.1.37.2 | ||||||||||||
| NatmMIBGroups | 1.3.6.1.2.1.37.2.1 | ||||||||||||
| GatmInterfaceConfGroup | 1.3.6.1.2.1.37.2.1.1 | deprecated | |||||||||||
group · deprecated A collection of objects providing configuration information about an ATM interface.
| |||||||||||||
| GatmTrafficDescrGroup | 1.3.6.1.2.1.37.2.1.2 | deprecated | |||||||||||
group · deprecated A collection of objects providing information about ATM traffic descriptor type and the associated parameters. | |||||||||||||
| GatmInterfaceDs3PlcpGroup | 1.3.6.1.2.1.37.2.1.3 | ||||||||||||
group · current A collection of objects providing information about DS3 PLCP layer at an ATM interface. | |||||||||||||
| GatmInterfaceTCGroup | 1.3.6.1.2.1.37.2.1.4 | ||||||||||||
group · current A collection of objects providing information about TC sublayer at an ATM interface. | |||||||||||||
| GatmVpcTerminationGroup | 1.3.6.1.2.1.37.2.1.5 | deprecated | |||||||||||
group · deprecated A collection of objects providing information about a VPL at an ATM interface which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). | |||||||||||||
| GatmVccTerminationGroup | 1.3.6.1.2.1.37.2.1.6 | deprecated | |||||||||||
group · deprecated A collection of objects providing information about a VCL at an ATM interface which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). | |||||||||||||
| GatmVpCrossConnectGroup | 1.3.6.1.2.1.37.2.1.7 | deprecated | |||||||||||
group · deprecated A collection of objects providing information about a VP cross-connect and the associated VPLs that are cross-connected together.
| |||||||||||||
| GatmVcCrossConnectGroup | 1.3.6.1.2.1.37.2.1.8 | deprecated | |||||||||||
group · deprecated A collection of objects providing information about a VC cross-connect and the associated VCLs that are cross-connected together.
| |||||||||||||
| Gaal5VccGroup | 1.3.6.1.2.1.37.2.1.9 | ||||||||||||
group · current A collection of objects providing AAL5 configuration and performance statistics of a VCC. | |||||||||||||
| GatmInterfaceConfGroup2 | 1.3.6.1.2.1.37.2.1.10 | ||||||||||||
group · current A collection of objects providing configuration information about an ATM interface.
| |||||||||||||
| GatmTrafficDescrGroup2 | 1.3.6.1.2.1.37.2.1.11 | ||||||||||||
group · current A collection of objects providing information about ATM traffic descriptor type and the associated parameters. | |||||||||||||
| GatmVpcTerminationGroup2 | 1.3.6.1.2.1.37.2.1.12 | ||||||||||||
group · current A collection of objects providing information about a VPL at an ATM interface which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). | |||||||||||||
| GatmVccTerminationGroup2 | 1.3.6.1.2.1.37.2.1.13 | ||||||||||||
group · current A collection of objects providing information about a VCL at an ATM interface which terminates a VCC (i.e., one which is NOT cross-connected to other VCLs). | |||||||||||||
| GatmVplCrossConnectGroup | 1.3.6.1.2.1.37.2.1.14 | ||||||||||||
group · current A collection of objects providing information about the VPLs that are cross-connected together. | |||||||||||||
| GatmVpPvcCrossConnectGroup | 1.3.6.1.2.1.37.2.1.15 | ||||||||||||
group · current A collection of objects providing information about a VP cross-connect for PVCs. These objects are not used for Soft PVCs or SVCs. | |||||||||||||
| GatmVclCrossConnectGroup | 1.3.6.1.2.1.37.2.1.16 | ||||||||||||
group · current A collection of objects providing information about the VCLs that are cross-connected together. | |||||||||||||
| GatmVcPvcCrossConnectGroup | 1.3.6.1.2.1.37.2.1.17 | ||||||||||||
group · current A collection of objects providing information about a VC cross-connect for PVCs. These objects are not used for Soft PVCs or SVCs. | |||||||||||||
| NatmMIBCompliances | 1.3.6.1.2.1.37.2.2 | ||||||||||||
| MatmMIBCompliance | 1.3.6.1.2.1.37.2.2.1 | deprecated | |||||||||||
compliance · deprecated The compliance statement for SNMP entities including networks which have ATM and AAL5 interfaces. | |||||||||||||
| MatmMIBCompliance2 | 1.3.6.1.2.1.37.2.2.2 | ||||||||||||
compliance · current The compliance statement for SNMP entities including networks which have ATM and AAL5 interfaces. | |||||||||||||
Groups and compliance
- aal5VccGroup
- atmInterfaceConfGroup
- atmInterfaceConfGroup2
- atmInterfaceDs3PlcpGroup
- atmInterfaceTCGroup
- atmMIBCompliance
- atmMIBCompliance2
- atmTrafficDescrGroup
- atmTrafficDescrGroup2
- atmVcCrossConnectGroup
- atmVcPvcCrossConnectGroup
- atmVccTerminationGroup
- atmVccTerminationGroup2
- atmVclCrossConnectGroup
- atmVpCrossConnectGroup
- atmVpPvcCrossConnectGroup
- atmVpcTerminationGroup
- atmVpcTerminationGroup2
- atmVplCrossConnectGroup
Used by
- ATM-FORUM-M4-MIB
- ATM-FORUM-SNMP-M4-MIB
- CTRON-SFCS-MIB (enterasys)
- HUAWEI-ATM-MIB (huawei)
- JUNIPER-ATM-COS-MIB (juniper/junos)
- JUNIPER-ATM-MIB (juniper/junos)
- Juniper-UNI-ATM-MIB (juniper/junose)