COMMON-TC-4RF
4RFCommon 4RF MIB Textual Conventions.
snmptranslate -m COMMON-TC-4RF -Tpsnmpwalk -v2c -c <community> -m COMMON-TC-4RF <host> 1.3.6.1.4.1.14817.2.4Imports
| MIB-4RF | fourRFGeneric, fourRFModules |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IfourRFCommonTCModule | 1.3.6.1.4.1.14817.2.4 | |||
identity Common 4RF MIB Textual Conventions. | ||||
Textual conventions
FourRFAlarmEnabledINTEGERdisabled(0)enabled(1)Indicates whether an alarm is enabled or not, it may be useful to allow specific alarms to be enabled or disabled by the user.
FourRFAlarmPresentINTEGERalarmPresent(1)noAlarmPresent(0)The possible alarm states, alarmPresent indicates that the alarm is active.
FourRFAlarmSeverityINTEGERmajor(4)minor(3)noSeverity(0)The possible alarm severities, not all values need be used.
FourRFAlarmStatusINTEGERcriticalAlarm(5)informationAlarm(1)majorAlarm(4)minorAlarm(3)noAlarm(0)warningAlarm(2)This is used to identify current alarm status.
FourRFChannelWidthINTEGERchannel100KHz(5)channel125KHz(6)channel14MHz(70)channel150KHz(7)channel1MHz(30)channel1point25MHz(33)channel1point35MHz(35)channel1point75MHz(40)channel200KHz(9)channel20KHz(1)channel250KHz(10)channel25KHz(2)channel2MHz(42)channel2point5MHz(45)channel3point5MHz(50)channel400KHz(13)channel500KHz(20)channel50KHz(3)channel5point25MHz(55)channel75KHz(4)channel7MHz(60)channel800KHz(25)invalidChannel(0)The possible channel width values.
FourRFClockSourceINTEGERinternalClock(2)linkClock(1)networkClock(0)This is used to identify the clock source for the terminal.
FourRFErrorCounterCounter32An error counter, e.g. for the uncorrectable error count.
FourRFFanStatusINTEGERfanFailed(2)fanOkay(1)notFitted(0)This is used to identify current fan status.
FourRFFileSizeUnsigned32A size of a file in bytes.
FourRFFrequencyUnsigned32A frequency value in Hz.
FourRFHardwareVersionDisplayString (SIZE (0..32))The hardware version details.
FourRFImageStatusINTEGERcurrentImage(1)currentNotSelected(2)inactiveImage(0)selectedImage(3)The possible image status values, currentImage means it is the running. selectedImage means that the image has been selected and will be used following the next reboot of the system, currentNotSelected means that the image is currently in use but won't be following a reboot.
FourRFImageTypeINTEGERconfiguration(4)firmware(5)kernel(1)mib(3)none(0)rootfs(2)The possible image types to upload.
FourRFImageVersionDisplayString (SIZE (0..64))The image version details.
FourRFLoopbackINTEGERloopbackOff(0)loopbackOn(1)This is used to control loopback or monitor status.
FourRFMHSBCommandINTEGERclearSwitchedAlarm(1)forceSwitchover(2)noCommand(0)This is used to send a command to an MHSB terminal.
FourRFMHSBStatusINTEGERactive(1)notAvailable(0)standby(2)This is used to give the state of an MHSB terminal.
FourRFModulationTypeINTEGERmod128QAM(4)mod16QAM(1)mod256QAM(5)mod32QAM(2)mod64QAM(3)modNone(6)modQPSK(0)The possible modulation types for the radio.
FourRFNetworkClockSelectINTEGERnone(0)primary(1)secondary(2)This is used to select the priority of the clocks to use.
FourRFNetworkClockStatusINTEGERactive(0)holdover(2)inactive(1)The possible modulation types for the radio.
FourRFProcessResultTypeINTEGERexecuting(1)failed(4)none(0)succeeded(3)writingToFlash(2)The possible states for a process which takes time to complete.
FourRFRSSIInteger32 (-2000..2000)Display hint:
d-1A receiver RSSI value, in dBm.
FourRFResetTypeINTEGERhardReset(2)none(0)softReset(1)watchdogReset(3)The possible types of reset.
FourRFRfBandINTEGERband1400MHz(30)band300MHz(10)band400MHz(20)band700MHz(24)band800MHz(26)band900MHz(28)invalidBand(0)This is used to identify the frequency band of the transmitter The bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) .FourRFSNRInteger32Display hint:
d-2A signal to noise ratio in dBm.
FourRFSerialNumberOCTET STRING (SIZE (8))A module/terminal serial number format xxxx-xxx.
FourRFSimpleLedStateINTEGERoff(0)on(1)The possible states for a simple LED.
FourRFTemperatureInteger32A temperature value in degrees Celcius.
FourRFTftpFileNameDisplayString (SIZE (0..255))The name of a file to transfered using TFTP.
FourRFTimeZoneINTEGERgmt(0)gmtMinusEight(-480)gmtMinusEleven(-660)gmtMinusFive(-300)gmtMinusFour(-240)gmtMinusNine(-540)gmtMinusOne(-60)gmtMinusSeven(-420)gmtMinusSix(-360)gmtMinusTen(-600)gmtMinusThree(-180)gmtMinusThreePointFive(-210)gmtMinusTwelve(-720)gmtMinusTwo(-120)gmtPlusEight(480)gmtPlusEleven(660)gmtPlusFive(300)gmtPlusFour(240)gmtPlusNine(540)gmtPlusOne(60)gmtPlusSeven(420)gmtPlusSix(360)gmtPlusTen(600)gmtPlusThirteen(800)gmtPlusThree(180)gmtPlusTwelve(720)gmtPlusTwo(120)This is used to assign an offset in minutes based on GMT timezone.
FourRFTriColourLedStateINTEGERgreen(1)off(0)orange(3)red(2)The possible states of a three-colour LED.
FourRFTxPowerINTEGERdbm10(10)dbm11(11)dbm12(12)dbm13(13)dbm14(14)dbm15(15)dbm16(16)dbm17(17)dbm18(18)dbm19(19)dbm20(20)dbm21(21)dbm22(22)dbm23(23)dbm24(24)dbm25(25)dbm26(26)dbm27(27)dbm28(28)dbm29(29)dbm30(30)dbm31(31)dbm32(32)dbm33(33)dbm34(34)dbm35(35)dbm36(36)dbm37(37)dbm38(38)dbm39(39)dbm40(40)noPower(0)A transmitter power value in dBm.
FourRFWebUserEnabledINTEGERuserDisabled(0)userEnabled(1)This is used to identify whether a web user is enabled.
FourRFWebUserGroupINTEGERadminGroup(2)readOnlyGroup(0)readWriteGroup(1)This is used to identify the group to which a web user belongs.