APRISAXE-MIB-4RF
4RFMIB for the AprisaXE project
snmptranslate -m APRISAXE-MIB-4RF -Tpsnmpwalk -v2c -c <community> -m APRISAXE-MIB-4RF <host> 1.3.6.1.4.1.14817.2.5Imports
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IfourRFAprisaXEModule | 1.3.6.1.4.1.14817.2.5 | ||||||||||||
identity MIB for the AprisaXE project | |||||||||||||
| NaprisaXEConfig | 1.3.6.1.4.1.14817.7.3.1 | ||||||||||||
node · current The root of the OID sub-tree for the AprisaXE product configuration. | |||||||||||||
| NaprisaXEGroups | 1.3.6.1.4.1.14817.7.3.1.1 | ||||||||||||
node · current The root of the OID sub-tree for the AprisaXE object groups. | |||||||||||||
| GaprisaXETerminalGroup | 1.3.6.1.4.1.14817.7.3.1.1.1 | ||||||||||||
group · current The AprisaXE terminal settings group.
| |||||||||||||
| GaprisaXEPerformanceGroup | 1.3.6.1.4.1.14817.7.3.1.1.6 | ||||||||||||
group · current The AprisaXE terminal performance group.
| |||||||||||||
| GaprisaXEExternalAlarm1Group | 1.3.6.1.4.1.14817.7.3.1.1.11 | ||||||||||||
group · current The AprisaXE first external alarm input group. | |||||||||||||
| GaprisaXEExternalAlarmOutputOneGroup | 1.3.6.1.4.1.14817.7.3.1.1.12 | ||||||||||||
group · current The AprisaXE first external alarm output group. | |||||||||||||
| GaprisaXEExternalAlarmOutputTwoGroup | 1.3.6.1.4.1.14817.7.3.1.1.13 | ||||||||||||
group · current The AprisaXE second external alarm output group. | |||||||||||||
| GaprisaXEExternalAlarmOutputThreeGroup | 1.3.6.1.4.1.14817.7.3.1.1.14 | ||||||||||||
group · current The AprisaXE third external alarm output group. | |||||||||||||
| GaprisaXEExternalAlarmOutputFourGroup | 1.3.6.1.4.1.14817.7.3.1.1.15 | ||||||||||||
group · current The AprisaXE fourth external alarm output group. | |||||||||||||
| GaprisaXEExternalAlarm2Group | 1.3.6.1.4.1.14817.7.3.1.1.16 | ||||||||||||
group · current The AprisaXE second external alarm input group. | |||||||||||||
| GaprisaXEExternalAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.17 | ||||||||||||
group · current The AprisaXE general external alarm details group. | |||||||||||||
| GaprisaXERemoteAlarmGroup | 1.3.6.1.4.1.14817.7.3.1.1.21 | obsolete | |||||||||||
group · obsolete The AprisaXE remote alarm status group. This group has been replaced by the now mappable external alarm output OIDs aprisaXEExternalAlarmOutputXXXGroup. | |||||||||||||
| GaprisaXEMHSBGroup | 1.3.6.1.4.1.14817.7.3.1.1.23 | ||||||||||||
group · current The aprisaXE MHSB group. | |||||||||||||
| GaprisaXEFanGroup | 1.3.6.1.4.1.14817.7.3.1.1.26 | ||||||||||||
group · current The AprisaXE fan status group. | |||||||||||||
| GaprisaXEAlarmControlGroup | 1.3.6.1.4.1.14817.7.3.1.1.32 | ||||||||||||
| GaprisaXETransmitterGroup | 1.3.6.1.4.1.14817.7.3.1.1.36 | ||||||||||||
group · current The AprisaXE transmitter settings group.
| |||||||||||||
| GaprisaXETReceiverGroup | 1.3.6.1.4.1.14817.7.3.1.1.46 | ||||||||||||
group · current The AprisaXE Receiver settings group.
| |||||||||||||
| GaprisaXEModemGroup | 1.3.6.1.4.1.14817.7.3.1.1.53 | ||||||||||||
group · current The AprisaXE Modem settings group.
| |||||||||||||
| GaprisaXEForwardPowerHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.56 | obsolete | |||||||||||
group · obsolete The AprisaXE forward power too high alarm group. | |||||||||||||
| GaprisaXEForwardPowerLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.61 | obsolete | |||||||||||
group · obsolete The AprisaXE forward power low alarm group. | |||||||||||||
| GaprisaXEReversePowerHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.66 | obsolete | |||||||||||
group · obsolete The AprisaXE reverse power too high alarm group. | |||||||||||||
| GaprisaXEReversePowerLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.71 | obsolete | |||||||||||
group · obsolete The AprisaXE reverse power too low alarm group. | |||||||||||||
| GaprisaXETxPaTempAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.76 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter temperature too high alarm group. | |||||||||||||
| GaprisaXETxPaTempWarnAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.81 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter temperature warning alarm group. | |||||||||||||
| GaprisaXETxAgcHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.86 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter AGC too high alarm group. | |||||||||||||
| GaprisaXETxAgcLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.91 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter AGC too low alarm group. | |||||||||||||
| GaprisaXETxVtuneHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.96 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter VTUNE too high alarm group. | |||||||||||||
| GaprisaXETxVtuneLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.101 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter VTUNE too low alarm group. | |||||||||||||
| GaprisaXETx5VDigHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.106 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 5V digital voltage too high alarm group. | |||||||||||||
| GaprisaXETx5VDigLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.111 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 5V digital voltage too low alarm group. | |||||||||||||
| GaprisaXETx7VRfHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.116 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 7V RF voltage too high alarm group. | |||||||||||||
| GaprisaXETx7VRfLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.121 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 7V RF voltage too low alarm group. | |||||||||||||
| GaprisaXETx9VHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.126 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 9V voltage too high alarm group. | |||||||||||||
| GaprisaXETx9VLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.131 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 9V voltage too low alarm group. | |||||||||||||
| GaprisaXETx11VHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.136 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 11V voltage too high alarm group. | |||||||||||||
| GaprisaXETx11VLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.141 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 11V voltage too low alarm group. | |||||||||||||
| GaprisaXETx28VHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.146 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 28V voltage too high alarm group. | |||||||||||||
| GaprisaXETx28VLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.151 | obsolete | |||||||||||
group · obsolete The AprisaXE transmitter 28V voltage too low alarm group. | |||||||||||||
| GaprisaXEReturnLossHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.152 | ||||||||||||
group · current The AprisaXE reverse power too high alarm group. | |||||||||||||
| GaprisaXETxSynthOutOfLockAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.153 | ||||||||||||
group · current The AprisaXE TX Synth out of lock alarm group. | |||||||||||||
| GaprisaXERxSynthOutOfLockAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.161 | ||||||||||||
group · current The AprisaXE Synth out of lock alarm group. | |||||||||||||
| GaprisaXERx12VAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.166 | ||||||||||||
group · current The AprisaXE 12V supply alarm group. | |||||||||||||
| GaprisaXERx3V3HiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.171 | obsolete | |||||||||||
group · obsolete The AprisaXE 3.3V supply high alarm group. | |||||||||||||
| GaprisaXERx3V3LoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.176 | obsolete | |||||||||||
group · obsolete The AprisaXE 3.3V supply low alarm group. | |||||||||||||
| GaprisaXERx5VHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.181 | obsolete | |||||||||||
group · obsolete The AprisaXE 5V supply High alarm group. | |||||||||||||
| GaprisaXERx5VLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.186 | obsolete | |||||||||||
group · obsolete The AprisaXE 5V supply low alarm group. | |||||||||||||
| GaprisaXERx9VHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.191 | obsolete | |||||||||||
group · obsolete The AprisaXE 9V supply High alarm group. | |||||||||||||
| GaprisaXERx9VLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.196 | obsolete | |||||||||||
group · obsolete The AprisaXE 9V supply low alarm group. | |||||||||||||
| GaprisaXERxNeg1V5HiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.201 | obsolete | |||||||||||
group · obsolete The AprisaXE Neg 1.5V supply High alarm group. | |||||||||||||
| GaprisaXERxNeg1V5LoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.206 | obsolete | |||||||||||
group · obsolete The AprisaXE Neg 1.5V supply low alarm group. | |||||||||||||
| GaprisaXERxAgcHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.211 | obsolete | |||||||||||
group · obsolete The AprisaXE AGC high alarm group. | |||||||||||||
| GaprisaXERxAgcLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.216 | obsolete | |||||||||||
group · obsolete The AprisaXE AGC low alarm group. | |||||||||||||
| GaprisaXERxRssiHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.221 | ||||||||||||
group · current The AprisaXE RSSI High alarm group. | |||||||||||||
| GaprisaXERxRssiLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.226 | ||||||||||||
group · current The AprisaXE RSSI low alarm group. | |||||||||||||
| GaprisaXERxVtuneHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.231 | obsolete | |||||||||||
group · obsolete The AprisaXE Vtune High alarm group. | |||||||||||||
| GaprisaXERxVtuneLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.236 | obsolete | |||||||||||
group · obsolete The AprisaXE Vtune low alarm group. | |||||||||||||
| GaprisaXERxEEAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.241 | ||||||||||||
group · current The AprisaXE EEPROM alarm group. | |||||||||||||
| GaprisaXETxADCChZeroHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.250 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Zero voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChZeroLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.251 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Zero voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChOneHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.252 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch One voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChOneLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.253 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch One voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChTwoHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.254 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Two voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChTwoLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.255 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Two voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChThreeHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.256 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Three voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChThreeLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.257 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Three voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChFourHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.258 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Four voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChFourLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.259 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Four voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChFiveHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.260 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Five voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChFiveLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.261 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Five voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChSixHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.262 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Six voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChSixLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.263 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Six voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChSevenHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.264 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Seven voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChSevenLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.265 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Seven voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChEightHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.266 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Eight voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChEightLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.267 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Eight voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChNineHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.268 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Nine voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChNineLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.269 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Nine voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChTenHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.270 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Ten voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChTenLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.271 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Ten voltage too High alarm group. | |||||||||||||
| GaprisaXETxADCChElevenHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.272 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Eleven voltage too high alarm group. | |||||||||||||
| GaprisaXETxADCChElevenLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.273 | ||||||||||||
group · current The aprisaXETx transmitter ADC Ch Eleven voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChZeroHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.275 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Zero voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChZeroLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.276 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Zero voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChOneHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.277 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch One voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChOneLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.278 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch One voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChTwoHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.279 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Two voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChTwoLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.280 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Two voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChThreeHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.281 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Three voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChThreeLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.282 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Three voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChFourHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.283 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Four voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChFourLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.284 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Four voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChFiveHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.285 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Five voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChFiveLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.286 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Five voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChSixHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.287 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Six voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChSixLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.288 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Six voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChSevenHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.289 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Seven voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChSevenLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.290 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Seven voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChEightHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.291 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Eight voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChEightLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.292 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Eight voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChNineHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.293 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Nine voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChNineLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.294 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Nine voltage too High alarm group. | |||||||||||||
| GaprisaXERxADCChTenHiAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.295 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Ten voltage too high alarm group. | |||||||||||||
| GaprisaXERxADCChTenLoAlarmsGroup | 1.3.6.1.4.1.14817.7.3.1.1.296 | ||||||||||||
group · current The aprisaXERx receiver ADC Ch Ten voltage too High alarm group. | |||||||||||||
| GaprisaXESoftwareUpgradeControlGroup | 1.3.6.1.4.1.14817.7.3.1.1.300 | ||||||||||||
group · current The Aprisa XE software upgrade group. | |||||||||||||
| GaprisaXEHSDParameterCompareGroup | 1.3.6.1.4.1.14817.7.3.1.1.305 | ||||||||||||
group · current The AprisaXE HSD Parameter Comparison group. | |||||||||||||
| NaprisaXEObjects | 1.3.6.1.4.1.14817.7.3.1.2 | ||||||||||||
node · current The root of the OID sub-tree for the AprisaXE product objects. | |||||||||||||
| NaprisaXETerminal | 1.3.6.1.4.1.14817.7.3.1.2.1 | ||||||||||||
| SaprisaXETerminalRfChannelWidth | 1.3.6.1.4.1.14817.7.3.1.2.1.4 | FourRFChannelWidth | RW | ||||||||||
scalar · FourRFChannelWidth · read-write · current The terminal RF channel width, the options are: 20kHz, 25kHz, 50kHz, 75kHz, 100kHz, 125kHz, 150kHz, 200kHz, 250kHz, 400kHz, 500kHz, 800kHz, 1MHz, 1.25MHz, 1.75MHz, 2MHz, 3.5MHz, 7MHz | |||||||||||||
| SaprisaXETerminalRSSI | 1.3.6.1.4.1.14817.7.3.1.2.1.5 | FourRFRSSI | RO | ||||||||||
scalar · FourRFRSSI · read-only · current The terminal RSSI in dBm. | |||||||||||||
| SaprisaXETerminalModulationState | 1.3.6.1.4.1.14817.7.3.1.2.1.6 | FourRFModulationType | RW | ||||||||||
scalar · FourRFModulationType · read-write · current The terminal modulation state. | |||||||||||||
| SaprisaXETerminalClockReference | 1.3.6.1.4.1.14817.7.3.1.2.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The terminal clock reference configuration: automatic - manual -
| |||||||||||||
| SaprisaXETerminalClockSource | 1.3.6.1.4.1.14817.7.3.1.2.1.8 | FourRFClockSource | RW | ||||||||||
scalar · FourRFClockSource · read-write · current The terminal clock source configuration:
network - clocking is recovered from the synchronous network
to which the terminal is connected.
link - clocking is recovered from the remote end of the link.
internal - the clock is generated internally.
The clock reference must be in manual mode for this to take effect. | |||||||||||||
| SaprisaXETerminalAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.1.9 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The terminal alarm status, this reflects the overall status of the terminal. This will match the colour of the front panel control LED. The states used are noAlarm, minorAlarm and majorAlarm. | |||||||||||||
| SaprisaXETerminalRxAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.1.10 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The terminal alarm status, this reflects the overall RX status of the terminal. This will match the colour of the front panel RX LED. The states used are noAlarm, minorAlarm and majorAlarm. | |||||||||||||
| SaprisaXETerminalTxAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.1.11 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The terminal alarm status, this reflects the overall TX status of the terminal. This will match the colour of the front panel TX LED. The states used are noAlarm, minorAlarm and majorAlarm. | |||||||||||||
| SaprisaXETerminalBandwidth | 1.3.6.1.4.1.14817.7.3.1.2.1.12 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This returns the total bandwidth available over the link in kbps. | |||||||||||||
| SaprisaXEMotherboardSerialNumber | 1.3.6.1.4.1.14817.7.3.1.2.1.13 | FourRFSerialNumber | RO | ||||||||||
scalar · FourRFSerialNumber · read-only · current The unique serial number for the motherboard. | |||||||||||||
| SaprisaXETerminalAllocatedBandwidth | 1.3.6.1.4.1.14817.7.3.1.2.1.14 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This returns the total bandwidth allocated over the link in kbps. | |||||||||||||
| SaprisaXETerminalLoopbackBandwidth | 1.3.6.1.4.1.14817.7.3.1.2.1.15 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This returns the total loopback bandwidth allocated in kbps. | |||||||||||||
| SaprisaXETerminalNetworkClockPrimaryStatus | 1.3.6.1.4.1.14817.7.3.1.2.1.16 | FourRFNetworkClockStatus | RO | ||||||||||
scalar · FourRFNetworkClockStatus · read-only · current This returns the status of the network clock primary source. | |||||||||||||
| SaprisaXETerminalNetworkClockSecondaryStatus | 1.3.6.1.4.1.14817.7.3.1.2.1.17 | FourRFNetworkClockStatus | RO | ||||||||||
scalar · FourRFNetworkClockStatus · read-only · current This returns the status of the network clock secondary source. | |||||||||||||
| SaprisaXETerminalNetworkClockCommand | 1.3.6.1.4.1.14817.7.3.1.2.1.18 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Forces a change in the active network clock.
| |||||||||||||
| SaprisaXETerminalStartupComplete | 1.3.6.1.4.1.14817.7.3.1.2.1.19 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates whether the terminal startup sequence is complete.
| |||||||||||||
| SaprisaXETerminalImageAlarmClear | 1.3.6.1.4.1.14817.7.3.1.2.1.20 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates whether the terminal startup sequence is complete.
| |||||||||||||
| SaprisaXETerminalMuxStatus | 1.3.6.1.4.1.14817.7.3.1.2.1.21 | INTEGER | RO | obsolete | |||||||||
scalar · INTEGER · read-only · obsolete This indicates if the terminal is operating in Mux mode.
| |||||||||||||
| SaprisaXETerminalBootloaderDataVersion | 1.3.6.1.4.1.14817.7.3.1.2.1.22 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This indicates the data version of the shared data field in the bootloader. | |||||||||||||
| SaprisaXETerminalUploadFailAlarmClear | 1.3.6.1.4.1.14817.7.3.1.2.1.23 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Used to clear a current Upload Failure Alarm.
| |||||||||||||
| SaprisaXETerminalEquipmentType | 1.3.6.1.4.1.14817.7.3.1.2.1.24 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current This indicates what type of equipment the terminal is.
| |||||||||||||
| NaprisaXEPerformance | 1.3.6.1.4.1.14817.7.3.1.2.6 | ||||||||||||
| SaprisaXECorrectableErrorCount | 1.3.6.1.4.1.14817.7.3.1.2.6.1 | FourRFErrorCounter | RO | 5926965 | |||||||||
scalar · FourRFErrorCounter · read-only · current The terminal correctable error count. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXEUncorrectableErrorCount | 1.3.6.1.4.1.14817.7.3.1.2.6.2 | FourRFErrorCounter | RO | 558800 | |||||||||
scalar · FourRFErrorCounter · read-only · current The terminal uncorrectable error count. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXEModemSNR | 1.3.6.1.4.1.14817.7.3.1.2.6.3 | FourRFSNR | RO | 3064 | |||||||||
scalar · FourRFSNR · read-only · current The modem signal to noise ratio. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXETxPacketCount | 1.3.6.1.4.1.14817.7.3.1.2.6.4 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The terminal transmitted ethernet packet count (to link). | |||||||||||||
| SaprisaXERxPacketCount | 1.3.6.1.4.1.14817.7.3.1.2.6.5 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The terminal received ethernet packet count (from link). | |||||||||||||
| SaprisaXERxPacketErrorCount | 1.3.6.1.4.1.14817.7.3.1.2.6.6 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The terminal received ethernet packet error count (from link). | |||||||||||||
| SaprisaXEErrorCounterCommand | 1.3.6.1.4.1.14817.7.3.1.2.6.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Forces reset, freeze or unfreeze the error counters.
| |||||||||||||
| SaprisaXEErrorFreeSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.8 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Error Free Seconds for the terminal. | |||||||||||||
| SaprisaXEErroredSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.9 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Errored Seconds for the terminal. | |||||||||||||
| SaprisaXEBERExponent | 1.3.6.1.4.1.14817.7.3.1.2.6.10 | DisplayString (SIZE (0..64)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The exponent of the Bit Error Rate for the terminal. | |||||||||||||
| SaprisaXEPscSysUncorrectableErrorCount | 1.3.6.1.4.1.14817.7.3.1.2.6.11 | DisplayString (SIZE (0..64)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The terminal uncorrectable error count. | |||||||||||||
| SaprisaXEPscSysErrorFreeSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.12 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Error Free Seconds for the terminal. | |||||||||||||
| SaprisaXEPscSysErroredSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.13 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Errored Seconds for the terminal. | |||||||||||||
| SaprisaXEPscSysBERExponent | 1.3.6.1.4.1.14817.7.3.1.2.6.14 | DisplayString (SIZE (0..64)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The exponent of the Bit Error Rate for the terminal. | |||||||||||||
| SaprisaXEPscRadioAUncorrectableErrorCount | 1.3.6.1.4.1.14817.7.3.1.2.6.15 | FourRFErrorCounter | RO | ||||||||||
scalar · FourRFErrorCounter · read-only · current The terminal uncorrectable error count. | |||||||||||||
| SaprisaXEPscRadioAErrorFreeSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.16 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Error Free Seconds for the terminal. | |||||||||||||
| SaprisaXEPscRadioAErroredSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.17 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Errored Seconds for the terminal. | |||||||||||||
| SaprisaXEPscRadioABERExponent | 1.3.6.1.4.1.14817.7.3.1.2.6.18 | DisplayString (SIZE (0..64)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The exponent of the Bit Error Rate for the terminal. | |||||||||||||
| SaprisaXEPscRadioBUncorrectableErrorCount | 1.3.6.1.4.1.14817.7.3.1.2.6.19 | FourRFErrorCounter | RO | ||||||||||
scalar · FourRFErrorCounter · read-only · current The terminal uncorrectable error count. | |||||||||||||
| SaprisaXEPscRadioBErrorFreeSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.20 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Error Free Seconds for the terminal. | |||||||||||||
| SaprisaXEPscRadioBErroredSeconds | 1.3.6.1.4.1.14817.7.3.1.2.6.21 | Counter32 | RO | ||||||||||
scalar · Counter32 · read-only · current The number of Errored Seconds for the terminal. | |||||||||||||
| SaprisaXEPscRadioBBERExponent | 1.3.6.1.4.1.14817.7.3.1.2.6.22 | DisplayString (SIZE (0..64)) | RO | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-only · current The exponent of the Bit Error Rate for the terminal. | |||||||||||||
| NaprisaXEExternalAlarms | 1.3.6.1.4.1.14817.7.3.1.2.11 | ||||||||||||
| NaprisaXEExternalAlarm1 | 1.3.6.1.4.1.14817.7.3.1.2.11.1 | ||||||||||||
| SaprisaXEExternalAlarm1Status | 1.3.6.1.4.1.14817.7.3.1.2.11.1.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the first external alarm input. | |||||||||||||
| SaprisaXEExternalAlarm1Severity | 1.3.6.1.4.1.14817.7.3.1.2.11.1.2 | FourRFAlarmSeverity | RW | ||||||||||
scalar · FourRFAlarmSeverity · read-write · current The severity of the first external alarm input. | |||||||||||||
| SaprisaXEExternalAlarm1Enabled | 1.3.6.1.4.1.14817.7.3.1.2.11.1.3 | FourRFAlarmEnabled | RW | ||||||||||
scalar · FourRFAlarmEnabled · read-write · current Indicates whether the first external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled. | |||||||||||||
| SaprisaXEExternalAlarm1Mapping | 1.3.6.1.4.1.14817.7.3.1.2.11.1.4 | AprisaXEAlarmMapping | RW | ||||||||||
scalar · AprisaXEAlarmMapping · read-write · current This defines how the first external alarm input is mapped to the remote alarms. | |||||||||||||
| SaprisaXEExternalAlarm1Description | 1.3.6.1.4.1.14817.7.3.1.2.11.1.5 | DisplayString (SIZE (0..64)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-write · current A description (user defined) for the external alarm. | |||||||||||||
| NaprisaXEExternalAlarm2 | 1.3.6.1.4.1.14817.7.3.1.2.11.2 | ||||||||||||
| SaprisaXEExternalAlarm2Status | 1.3.6.1.4.1.14817.7.3.1.2.11.2.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the second external alarm input. | |||||||||||||
| SaprisaXEExternalAlarm2Severity | 1.3.6.1.4.1.14817.7.3.1.2.11.2.2 | FourRFAlarmSeverity | RW | ||||||||||
scalar · FourRFAlarmSeverity · read-write · current The severity of the second external alarm input. | |||||||||||||
| SaprisaXEExternalAlarm2Enabled | 1.3.6.1.4.1.14817.7.3.1.2.11.2.3 | FourRFAlarmEnabled | RW | ||||||||||
scalar · FourRFAlarmEnabled · read-write · current Indicates whether the second external alarm input is enabled. If not changes to the input will be ignored. By default the alarm is enabled. | |||||||||||||
| SaprisaXEExternalAlarm2Mapping | 1.3.6.1.4.1.14817.7.3.1.2.11.2.4 | AprisaXEAlarmMapping | RW | ||||||||||
scalar · AprisaXEAlarmMapping · read-write · current This defines how the second external alarm input is mapped to the remote alarms. | |||||||||||||
| SaprisaXEExternalAlarm2Description | 1.3.6.1.4.1.14817.7.3.1.2.11.2.5 | DisplayString (SIZE (0..64)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-write · current A description (user defined) for the external alarm. | |||||||||||||
| SaprisaXEExternalAlarmPolarity | 1.3.6.1.4.1.14817.7.3.1.2.11.3 | AprisaXEAlarmPolarity | RW | ||||||||||
scalar · AprisaXEAlarmPolarity · read-write · current Indicates the polarity used to indicate the presence of an alarm at an external alarm input. | |||||||||||||
| SaprisaXEExternalAlarmOutputPolarity | 1.3.6.1.4.1.14817.7.3.1.2.11.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates the polarity used to indicate the presence of an alarm at an external alarm output, this may be different from the input polarity.
| |||||||||||||
| NaprisaXEExternalAlarmOutputOne | 1.3.6.1.4.1.14817.7.3.1.2.11.5 | ||||||||||||
| SaprisaXEExternalAlarmOutputOneStatus | 1.3.6.1.4.1.14817.7.3.1.2.11.5.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the first external alarm output. | |||||||||||||
| SaprisaXEExternalAlarmOutputOneMapping | 1.3.6.1.4.1.14817.7.3.1.2.11.5.2 | AprisaXEAlarmMapping | RW | ||||||||||
scalar · AprisaXEAlarmMapping · read-write · current This defines how the first external alarm output is mapped to the alarms. | |||||||||||||
| NaprisaXEExternalAlarmOutputTwo | 1.3.6.1.4.1.14817.7.3.1.2.11.6 | ||||||||||||
| SaprisaXEExternalAlarmOutputTwoStatus | 1.3.6.1.4.1.14817.7.3.1.2.11.6.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the second external alarm output. | |||||||||||||
| SaprisaXEExternalAlarmOutputTwoMapping | 1.3.6.1.4.1.14817.7.3.1.2.11.6.2 | AprisaXEAlarmMapping | RW | ||||||||||
scalar · AprisaXEAlarmMapping · read-write · current This defines how the second external alarm output is mapped to the alarms. | |||||||||||||
| NaprisaXEExternalAlarmOutputThree | 1.3.6.1.4.1.14817.7.3.1.2.11.7 | ||||||||||||
| SaprisaXEExternalAlarmOutputThreeStatus | 1.3.6.1.4.1.14817.7.3.1.2.11.7.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the third external alarm output. | |||||||||||||
| SaprisaXEExternalAlarmOutputThreeMapping | 1.3.6.1.4.1.14817.7.3.1.2.11.7.2 | AprisaXEAlarmMapping | RW | ||||||||||
scalar · AprisaXEAlarmMapping · read-write · current This defines how the third external alarm output is mapped to the alarms. | |||||||||||||
| NaprisaXEExternalAlarmOutputFour | 1.3.6.1.4.1.14817.7.3.1.2.11.8 | ||||||||||||
| SaprisaXEExternalAlarmOutputFourStatus | 1.3.6.1.4.1.14817.7.3.1.2.11.8.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the fourth external alarm output. | |||||||||||||
| SaprisaXEExternalAlarmOutputFourMapping | 1.3.6.1.4.1.14817.7.3.1.2.11.8.2 | AprisaXEAlarmMapping | RW | ||||||||||
scalar · AprisaXEAlarmMapping · read-write · current This defines how the fourth external alarm output is mapped to the alarms. | |||||||||||||
| NaprisaXERemoteAlarms | 1.3.6.1.4.1.14817.7.3.1.2.16 | ||||||||||||
| SaprisaXEMajorRemoteAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.16.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the remote major alarm. | |||||||||||||
| SaprisaXEMajorRemoteAlarmOutput | 1.3.6.1.4.1.14817.7.3.1.2.16.2 | AprisaXEAlarmOutput | RW | obsolete | |||||||||
scalar · AprisaXEAlarmOutput · read-write · obsolete This defines how the remote major alarm is mapped to the external alarm outputs. | |||||||||||||
| SaprisaXEMinorRemoteAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.16.10 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the remote minor alarm. | |||||||||||||
| SaprisaXEMinorRemoteAlarmOutput | 1.3.6.1.4.1.14817.7.3.1.2.16.11 | AprisaXEAlarmOutput | RW | obsolete | |||||||||
scalar · AprisaXEAlarmOutput · read-write · obsolete This defines how the remote minor alarm is mapped to the external alarm outputs. | |||||||||||||
| NaprisaXEMHSB | 1.3.6.1.4.1.14817.7.3.1.2.19 | ||||||||||||
| SaprisaXEMHSBStatus | 1.3.6.1.4.1.14817.7.3.1.2.19.1 | FourRFMHSBStatus | RO | ||||||||||
scalar · FourRFMHSBStatus · read-only · current The state of an MHSB configured terminal. | |||||||||||||
| SaprisaXEMHSBEnable | 1.3.6.1.4.1.14817.7.3.1.2.19.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set the terminal into Monitored Hot Standby Mode.
| |||||||||||||
| SaprisaXEMHSBCommand | 1.3.6.1.4.1.14817.7.3.1.2.19.3 | FourRFMHSBCommand | RW | ||||||||||
scalar · FourRFMHSBCommand · read-write · current Commands to apply while in MHSB mode. | |||||||||||||
| SaprisaXEMHSBTerminalSelect | 1.3.6.1.4.1.14817.7.3.1.2.19.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configure terminal as terminal A or terminal B of an MHSB pair.
| |||||||||||||
| SaprisaXEMHSBSwitchoverStatus | 1.3.6.1.4.1.14817.7.3.1.2.19.5 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the alarm reflecting if a switchover has occurred. | |||||||||||||
| NaprisaXEFans | 1.3.6.1.4.1.14817.7.3.1.2.21 | ||||||||||||
| SaprisaXEFan1Status | 1.3.6.1.4.1.14817.7.3.1.2.21.1 | FourRFFanStatus | RO | ||||||||||
scalar · FourRFFanStatus · read-only · current The status of the fan one. | |||||||||||||
| SaprisaXEFan2Status | 1.3.6.1.4.1.14817.7.3.1.2.21.2 | FourRFFanStatus | RO | ||||||||||
scalar · FourRFFanStatus · read-only · current The status of the fan two. | |||||||||||||
| SaprisaXEFanEnable | 1.3.6.1.4.1.14817.7.3.1.2.21.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Turn the fans on or off.
| |||||||||||||
| TaprisaXEAlarmTable | 1.3.6.1.4.1.14817.7.3.1.2.26 | NA | |||||||||||
table · not-accessible · current This table stores the currently active alarms. Up to 500 separate alarms will be stored in the table. | |||||||||||||
| RaprisaXEAlarmEntry | 1.3.6.1.4.1.14817.7.3.1.2.26.1 | NA | |||||||||||
row · not-accessible · current The table entry index specification, just the alarm index.
| |||||||||||||
| CaprisaXEAlarmIndex | 1.3.6.1.4.1.14817.7.3.1.2.26.1.1 | INTEGER (0..500) | RO | ||||||||||
column · INTEGER (0..500) · read-only · current The index into the alarm table. | |||||||||||||
| CaprisaXEAlarmSlot | 1.3.6.1.4.1.14817.7.3.1.2.26.1.2 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current The number of the slot generating the alarm. | |||||||||||||
| CaprisaXEAlarmSource | 1.3.6.1.4.1.14817.7.3.1.2.26.1.3 | AprisaXEAlarmSource | RO | ||||||||||
column · AprisaXEAlarmSource · read-only · current The source of the alarm, a card type or external. | |||||||||||||
| CaprisaXEAlarmPort | 1.3.6.1.4.1.14817.7.3.1.2.26.1.4 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current The source port of the alarm. | |||||||||||||
| CaprisaXEAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.26.1.5 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current The severity of the alarm. | |||||||||||||
| CaprisaXEAlarmType | 1.3.6.1.4.1.14817.7.3.1.2.26.1.6 | AprisaXEAlarmType | RO | ||||||||||
column · AprisaXEAlarmType · read-only · current The type of the alarm. | |||||||||||||
| CaprisaXEAlarmTime | 1.3.6.1.4.1.14817.7.3.1.2.26.1.7 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The time that the alarm occurred. | |||||||||||||
| TaprisaXEAlarmHistoryTable | 1.3.6.1.4.1.14817.7.3.1.2.31 | NA | |||||||||||
table · not-accessible · current This table stores a history of the alarms as they become active and cleared. | |||||||||||||
| RaprisaXEAlarmHistoryEntry | 1.3.6.1.4.1.14817.7.3.1.2.31.1 | NA | |||||||||||
row · not-accessible · current The table entry index specification, just the alarm index. | |||||||||||||
| CaprisaXEAlarmHistoryIndex | 1.3.6.1.4.1.14817.7.3.1.2.31.1.1 | INTEGER (0..100) | RO | ||||||||||
column · INTEGER (0..100) · read-only · current The index into the alarm history table. | |||||||||||||
| CaprisaXEAlarmHistorySlot | 1.3.6.1.4.1.14817.7.3.1.2.31.1.2 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current The number of the slot generating the alarm. | |||||||||||||
| CaprisaXEAlarmHistorySource | 1.3.6.1.4.1.14817.7.3.1.2.31.1.3 | AprisaXEAlarmSource | RO | ||||||||||
column · AprisaXEAlarmSource · read-only · current The source of the alarm, a card type or external. | |||||||||||||
| CaprisaXEAlarmHistoryPort | 1.3.6.1.4.1.14817.7.3.1.2.31.1.4 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current The source port of the alarm. | |||||||||||||
| CaprisaXEAlarmHistorySeverity | 1.3.6.1.4.1.14817.7.3.1.2.31.1.5 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current The severity of the alarm. | |||||||||||||
| CaprisaXEAlarmHistoryType | 1.3.6.1.4.1.14817.7.3.1.2.31.1.6 | AprisaXEAlarmType | RO | ||||||||||
column · AprisaXEAlarmType · read-only · current The type of the alarm. | |||||||||||||
| CaprisaXEAlarmHistoryPresent | 1.3.6.1.4.1.14817.7.3.1.2.31.1.7 | FourRFAlarmPresent | RO | ||||||||||
column · FourRFAlarmPresent · read-only · current Indicates whether the alarm is present or not. | |||||||||||||
| CaprisaXEAlarmHistoryTime | 1.3.6.1.4.1.14817.7.3.1.2.31.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current The time that the alarm state change occurred. | |||||||||||||
| NaprisaXEAlarmControl | 1.3.6.1.4.1.14817.7.3.1.2.32 | ||||||||||||
| SaprisaXEAlarmHistoryCommand | 1.3.6.1.4.1.14817.7.3.1.2.32.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allows the alarm history table to be cleared.
| |||||||||||||
| NaprisaXETransmitter | 1.3.6.1.4.1.14817.7.3.1.2.36 | ||||||||||||
| SaprisaXETransmitterStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Indicates whether the transmitter is currently on or off.
| |||||||||||||
| SaprisaXETransmitterCommand | 1.3.6.1.4.1.14817.7.3.1.2.36.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Commands used to control the transmitter, currently the transmitter can be switched on and off. No other commands are defined.
| |||||||||||||
| SaprisaXETransmitterSynthesiserStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.3 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter synthesiser. | |||||||||||||
| SaprisaXETransmitter5VPowerStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.4 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter 5V power supply. | |||||||||||||
| SaprisaXETransmitter11VPowerStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.5 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter 11V power supply. | |||||||||||||
| SaprisaXETransmitter28VPowerStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.6 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter 28V power supply. | |||||||||||||
| SaprisaXETransmitterFrequency | 1.3.6.1.4.1.14817.7.3.1.2.36.7 | FourRFFrequency | RW | 1448250000 | |||||||||
scalar · FourRFFrequency · read-write · current The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency value should be supplied in Hz. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXETransmitterPower | 1.3.6.1.4.1.14817.7.3.1.2.36.8 | FourRFTxPower | RW | 35 | |||||||||
scalar · FourRFTxPower · read-write · current The TX power value, the value should be entered in dB. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXETransmitterAGC | 1.3.6.1.4.1.14817.7.3.1.2.36.9 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The Automatic Gain Control value in millivolts. | |||||||||||||
| SaprisaXETransmitterForwardPower | 1.3.6.1.4.1.14817.7.3.1.2.36.10 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The forward power measurement value in millivolts. | |||||||||||||
| SaprisaXETransmitterReversePower | 1.3.6.1.4.1.14817.7.3.1.2.36.11 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The reverse power value in millivolts. | |||||||||||||
| SaprisaXETransmitterTemperature | 1.3.6.1.4.1.14817.7.3.1.2.36.12 | FourRFTemperature | RO | obsolete | |||||||||
scalar · FourRFTemperature · read-only · obsolete The temperature value in degrees Celcius. | |||||||||||||
| SaprisaXETransmitterVTune | 1.3.6.1.4.1.14817.7.3.1.2.36.13 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The voltage output from TX synth. | |||||||||||||
| SaprisaXETransmitter28VSupply | 1.3.6.1.4.1.14817.7.3.1.2.36.14 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 28V supply rail value in millivolts. | |||||||||||||
| SaprisaXETransmitter11VSupply | 1.3.6.1.4.1.14817.7.3.1.2.36.15 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 11V supply rail value in millivolts. | |||||||||||||
| SaprisaXETransmitter5VDigitalSupply | 1.3.6.1.4.1.14817.7.3.1.2.36.16 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 5V digital supply rail value in millivolts. | |||||||||||||
| SaprisaXETransmitter7VSupply | 1.3.6.1.4.1.14817.7.3.1.2.36.17 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 7V RF supply rail value in millivolts. | |||||||||||||
| SaprisaXETransmitter9VSupply | 1.3.6.1.4.1.14817.7.3.1.2.36.18 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 9V supply synthesiser rail value in millivolts. | |||||||||||||
| SaprisaXETransmitterCharacterisationDataStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.19 | AprisaXEDataStatus | RO | ||||||||||
scalar · AprisaXEDataStatus · read-only · current The status of the transmitter characterisation data. | |||||||||||||
| SaprisaXETransmitterSerialNumber | 1.3.6.1.4.1.14817.7.3.1.2.36.20 | FourRFSerialNumber | RO | ||||||||||
scalar · FourRFSerialNumber · read-only · current The unique module serial number for the transmitter. | |||||||||||||
| SaprisaXETransmitterReturnLoss | 1.3.6.1.4.1.14817.7.3.1.2.36.21 | AprisaXEDbValue | RO | ||||||||||
scalar · AprisaXEDbValue · read-only · current The return loss for the transmitter. | |||||||||||||
| SaprisaXETransmitterMibDataStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.22 | AprisaXEDataStatus | RO | ||||||||||
scalar · AprisaXEDataStatus · read-only · current The status of the transmitter MIB data. | |||||||||||||
| SaprisaXETransmitterADCChZero | 1.3.6.1.4.1.14817.7.3.1.2.36.23 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch zero voltage. | |||||||||||||
| SaprisaXETransmitterADCChOne | 1.3.6.1.4.1.14817.7.3.1.2.36.24 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch one voltage. | |||||||||||||
| SaprisaXETransmitterADCChTwo | 1.3.6.1.4.1.14817.7.3.1.2.36.25 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch two voltage. | |||||||||||||
| SaprisaXETransmitterADCChThree | 1.3.6.1.4.1.14817.7.3.1.2.36.26 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch three voltage. | |||||||||||||
| SaprisaXETransmitterADCChFour | 1.3.6.1.4.1.14817.7.3.1.2.36.27 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch four voltage. | |||||||||||||
| SaprisaXETransmitterADCChFive | 1.3.6.1.4.1.14817.7.3.1.2.36.28 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch five voltage. | |||||||||||||
| SaprisaXETransmitterADCChSix | 1.3.6.1.4.1.14817.7.3.1.2.36.29 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch six voltage. | |||||||||||||
| SaprisaXETransmitterADCChSeven | 1.3.6.1.4.1.14817.7.3.1.2.36.30 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch seven voltage. | |||||||||||||
| SaprisaXETransmitterADCChEight | 1.3.6.1.4.1.14817.7.3.1.2.36.31 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch eight voltage. | |||||||||||||
| SaprisaXETransmitterADCChNine | 1.3.6.1.4.1.14817.7.3.1.2.36.32 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch nine voltage. | |||||||||||||
| SaprisaXETransmitterADCChTen | 1.3.6.1.4.1.14817.7.3.1.2.36.33 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch ten voltage. | |||||||||||||
| SaprisaXETransmitterADCChEleven | 1.3.6.1.4.1.14817.7.3.1.2.36.34 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The TX adc ch eleven voltage. | |||||||||||||
| SaprisaXETransmitterNeg5VPowerStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.35 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter Negative 5V power supply. | |||||||||||||
| SaprisaXETransmitterAmplifierBalanceStatus | 1.3.6.1.4.1.14817.7.3.1.2.36.36 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter Balanced Power Amplifier. | |||||||||||||
| SaprisaXETransmitterTcxoAdjustment | 1.3.6.1.4.1.14817.7.3.1.2.36.37 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The TX TCXO adjustment to be made by the customer, to tune the TCXO. This is a shift in DAC steps.
| |||||||||||||
| SaprisaXETransmitterSynthFileVersion | 1.3.6.1.4.1.14817.7.3.1.2.36.38 | INTEGER (0..999) | RO | ||||||||||
scalar · INTEGER (0..999) · read-only · current The version of the Synth File loaded from the filesystem. | |||||||||||||
| SaprisaXETransmitterOperationalDataVersion | 1.3.6.1.4.1.14817.7.3.1.2.36.39 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The version of the operational data for the transmitter. | |||||||||||||
| SaprisaXETransmitterSwCompatibility | 1.3.6.1.4.1.14817.7.3.1.2.36.40 | INTEGER (0..999) | RO | ||||||||||
scalar · INTEGER (0..999) · read-only · current The transmitter software compatibility number. | |||||||||||||
| NaprisaXEReceiver | 1.3.6.1.4.1.14817.7.3.1.2.51 | ||||||||||||
| SaprisaXEReceiverStatus | 1.3.6.1.4.1.14817.7.3.1.2.51.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Status of the receiver, currently the receiver can be On/Off and the loopback can be On/Off.
| |||||||||||||
| SaprisaXEReceiverCommand | 1.3.6.1.4.1.14817.7.3.1.2.51.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Commands used to control the receiver, currently the receiver can be switched on and off and the loopback option switched on and off.
| |||||||||||||
| SaprisaXEReceiverSynthesiserStatus | 1.3.6.1.4.1.14817.7.3.1.2.51.3 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver synthesiser. | |||||||||||||
| SaprisaXEReceiver12VPowerStatus | 1.3.6.1.4.1.14817.7.3.1.2.51.4 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the Receiver 12V power supply. | |||||||||||||
| SaprisaXEReceiverFrequency | 1.3.6.1.4.1.14817.7.3.1.2.51.5 | FourRFFrequency | RW | 1513250000 | |||||||||
scalar · FourRFFrequency · read-write · current The terminal transmit frequency in MHz. The possible bands are: 330 to 400 MHz (300 MHz) 400 to 470 MHz (400 MHz) 1350 to 1550 MHz (1400 MHz) The frequency value should be supplied in Hz. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXEReceiverRSSI | 1.3.6.1.4.1.14817.7.3.1.2.51.6 | FourRFRSSI | RO | -684 | |||||||||
scalar · FourRFRSSI · read-only · current The characterised RSSI Voltage. Example values from LibreNMS test devices
| |||||||||||||
| SaprisaXEReceiverTemperature | 1.3.6.1.4.1.14817.7.3.1.2.51.8 | FourRFTemperature | RO | ||||||||||
scalar · FourRFTemperature · read-only · current The temperature value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiverVTune | 1.3.6.1.4.1.14817.7.3.1.2.51.9 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The voltage output from RX synth value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiver9VSupply | 1.3.6.1.4.1.14817.7.3.1.2.51.10 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 9V supply rail value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiver5VSupply | 1.3.6.1.4.1.14817.7.3.1.2.51.11 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 5V supply rail value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiverModemAGC | 1.3.6.1.4.1.14817.7.3.1.2.51.12 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The modem AGC, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiverNeg1V5Supply | 1.3.6.1.4.1.14817.7.3.1.2.51.13 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The -1.5V supply rail value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiver3V3Supply | 1.3.6.1.4.1.14817.7.3.1.2.51.14 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The 3.3V supply rail value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiverDacTest | 1.3.6.1.4.1.14817.7.3.1.2.51.15 | AprisaXEAdcVoltage | RO | obsolete | |||||||||
scalar · AprisaXEAdcVoltage · read-only · obsolete The DacTest value, this should only be accessible in engineering mode. | |||||||||||||
| SaprisaXEReceiverCharacterisationDataStatus | 1.3.6.1.4.1.14817.7.3.1.2.51.16 | AprisaXEDataStatus | RO | ||||||||||
scalar · AprisaXEDataStatus · read-only · current The status of the receiver characterisation data. | |||||||||||||
| SaprisaXEReceiverSerialNumber | 1.3.6.1.4.1.14817.7.3.1.2.51.17 | FourRFSerialNumber | RO | ||||||||||
scalar · FourRFSerialNumber · read-only · current The unique module serial number for the receiver. | |||||||||||||
| SaprisaXEReceiverRfLoopback | 1.3.6.1.4.1.14817.7.3.1.2.51.18 | FourRFLoopback | RW | ||||||||||
scalar · FourRFLoopback · read-write · current Enables and disabled RF loopback. | |||||||||||||
| SaprisaXEReceiverRfLoopbackTimeout | 1.3.6.1.4.1.14817.7.3.1.2.51.19 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current The number of seconds after which RF loopback should timeout. | |||||||||||||
| SaprisaXEReceiverMibDataStatus | 1.3.6.1.4.1.14817.7.3.1.2.51.20 | AprisaXEDataStatus | RO | ||||||||||
scalar · AprisaXEDataStatus · read-only · current The status of the receiver MIB data. | |||||||||||||
| SaprisaXEReceiverADCChZero | 1.3.6.1.4.1.14817.7.3.1.2.51.21 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch zero voltage. | |||||||||||||
| SaprisaXEReceiverADCChOne | 1.3.6.1.4.1.14817.7.3.1.2.51.22 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch one voltage. | |||||||||||||
| SaprisaXEReceiverADCChTwo | 1.3.6.1.4.1.14817.7.3.1.2.51.23 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch two voltage. | |||||||||||||
| SaprisaXEReceiverADCChThree | 1.3.6.1.4.1.14817.7.3.1.2.51.24 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch three voltage. | |||||||||||||
| SaprisaXEReceiverADCChFour | 1.3.6.1.4.1.14817.7.3.1.2.51.25 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch four voltage. | |||||||||||||
| SaprisaXEReceiverADCChFive | 1.3.6.1.4.1.14817.7.3.1.2.51.26 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch five voltage. | |||||||||||||
| SaprisaXEReceiverADCChSix | 1.3.6.1.4.1.14817.7.3.1.2.51.27 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch six voltage. | |||||||||||||
| SaprisaXEReceiverADCChSeven | 1.3.6.1.4.1.14817.7.3.1.2.51.28 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch seven voltage. | |||||||||||||
| SaprisaXEReceiverADCChEight | 1.3.6.1.4.1.14817.7.3.1.2.51.29 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch eight voltage. | |||||||||||||
| SaprisaXEReceiverADCChNine | 1.3.6.1.4.1.14817.7.3.1.2.51.30 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch nine voltage. | |||||||||||||
| SaprisaXEReceiverADCChTen | 1.3.6.1.4.1.14817.7.3.1.2.51.31 | AprisaXEAdcVoltage | RO | ||||||||||
scalar · AprisaXEAdcVoltage · read-only · current The RX adc ch ten voltage. | |||||||||||||
| SaprisaXEReceiverRSSIThresQPSKLowerOn | 1.3.6.1.4.1.14817.7.3.1.2.51.32 | Integer32 (-110..-40) | RW | ||||||||||
scalar · Integer32 (-110..-40) · read-write · current The QPSK Lower ON RSSI Threshold. | |||||||||||||
| SaprisaXEReceiverRSSIThres16QAMLowerOn | 1.3.6.1.4.1.14817.7.3.1.2.51.33 | Integer32 (-110..-40) | RW | ||||||||||
scalar · Integer32 (-110..-40) · read-write · current The 16QAM Lower ON RSSI Threshold. | |||||||||||||
| SaprisaXEReceiverRSSIThres32QAMLowerOn | 1.3.6.1.4.1.14817.7.3.1.2.51.34 | Integer32 (-110..-40) | RW | ||||||||||
scalar · Integer32 (-110..-40) · read-write · current The 32QAM Lower ON RSSI Threshold. | |||||||||||||
| SaprisaXEReceiverRSSIThres64QAMLowerOn | 1.3.6.1.4.1.14817.7.3.1.2.51.35 | Integer32 (-110..-40) | RW | ||||||||||
scalar · Integer32 (-110..-40) · read-write · current The 64QAM Lower ON RSSI Threshold. | |||||||||||||
| SaprisaXEReceiverSynthFileVersion | 1.3.6.1.4.1.14817.7.3.1.2.51.36 | INTEGER (0..999) | RO | ||||||||||
scalar · INTEGER (0..999) · read-only · current The version of the Synth File loaded from the filesystem. | |||||||||||||
| SaprisaXEReceiverOperationalDataVersion | 1.3.6.1.4.1.14817.7.3.1.2.51.37 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The version of the operational data of the receiver. | |||||||||||||
| SaprisaXEReceiverSwCompatibility | 1.3.6.1.4.1.14817.7.3.1.2.51.38 | INTEGER (0..999) | RO | ||||||||||
scalar · INTEGER (0..999) · read-only · current The receiver software compatibility number. | |||||||||||||
| NaprisaXEModem | 1.3.6.1.4.1.14817.7.3.1.2.61 | ||||||||||||
| SaprisaXEModemDemodAligmentStatus | 1.3.6.1.4.1.14817.7.3.1.2.61.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the demodulator alignment. | |||||||||||||
| SaprisaXEModemTdmAligmentStatus | 1.3.6.1.4.1.14817.7.3.1.2.61.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the TDM alignment. | |||||||||||||
| SaprisaXEModemRefAStatus | 1.3.6.1.4.1.14817.7.3.1.2.61.3 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the REFa clock. | |||||||||||||
| SaprisaXEModemRefBStatus | 1.3.6.1.4.1.14817.7.3.1.2.61.4 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the REFb clock. | |||||||||||||
| SaprisaXEModemUncorrectableBlockCount | 1.3.6.1.4.1.14817.7.3.1.2.61.5 | FourRFErrorCounter | RO | ||||||||||
scalar · FourRFErrorCounter · read-only · current Count of uncorrectable blocks since last read. | |||||||||||||
| SaprisaXEModemIQData | 1.3.6.1.4.1.14817.7.3.1.2.61.6 | AprisaXEIQData | RO | ||||||||||
scalar · AprisaXEIQData · read-only · current A list of I/Q data pairs, this is a sequence of byes values the first byte is an I value, the second a Q value. | |||||||||||||
| SaprisaXEModemSyncStatus | 1.3.6.1.4.1.14817.7.3.1.2.61.7 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the link lock. | |||||||||||||
| SaprisaXEModemFreqOffsetEnable | 1.3.6.1.4.1.14817.7.3.1.2.61.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Turn the Modulator frequency offset of 50kHz on or off.
| |||||||||||||
| SaprisaXEModemInterleaverEnable | 1.3.6.1.4.1.14817.7.3.1.2.61.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Interleaver being used on the modem. Trade off between link latency and FEC performance.
| |||||||||||||
| SaprisaXEModemQPSKCoding | 1.3.6.1.4.1.14817.7.3.1.2.61.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Encoding and Decoding being used for QPSK. Can be either Gray coded or non Gray coded.
| |||||||||||||
| SaprisaXEModemConfigVersion | 1.3.6.1.4.1.14817.7.3.1.2.61.11 | INTEGER (0..999) | RO | ||||||||||
scalar · INTEGER (0..999) · read-only · current Modem Configuration file version. | |||||||||||||
| TaprisaXEBoardTable | 1.3.6.1.4.1.14817.7.3.1.2.66 | NA | |||||||||||
table · not-accessible · current This table stores the basic information for the plugin slots. | |||||||||||||
| RaprisaXEBoardEntry | 1.3.6.1.4.1.14817.7.3.1.2.66.1 | NA | |||||||||||
| CaprisaXEBoardSlot | 1.3.6.1.4.1.14817.7.3.1.2.66.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current The slot number in which the board resides, the physical slots are numbered from zero to ten and mapped to one to eleven in the MIB. The motherboard is therefore in physical slot 0 but MIB slot 1. | |||||||||||||
| CaprisaXEBoardType | 1.3.6.1.4.1.14817.7.3.1.2.66.1.2 | AprisaXECardType | RO | ||||||||||
column · AprisaXECardType · read-only · current The type of the board in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slot 9 - receiver : the receiver card, this will be in physical slot 10 - quadJET : e1/t1 4 port card | |||||||||||||
| CaprisaXEExpectedBoardType | 1.3.6.1.4.1.14817.7.3.1.2.66.1.3 | AprisaXECardType | RW | ||||||||||
column · AprisaXECardType · read-write · current The type of the board expected in the slot. The types are as follows: - none : there is no card in the slot - modem : this card will be fitted in physical slot 0 - transmitter : the transmitter card, this will be in physical slot 9 - receiver : the receiver card, this will be in physical slot 10 - quadJET : e1/t1 4 port card | |||||||||||||
| CaprisaXEBoardHardwareVersion | 1.3.6.1.4.1.14817.7.3.1.2.66.1.4 | AprisaXEHardwareVersion | RO | ||||||||||
column · AprisaXEHardwareVersion · read-only · current Field indicating the hardware version for the board in the slot. | |||||||||||||
| CaprisaXEBoardFirmwareVersion | 1.3.6.1.4.1.14817.7.3.1.2.66.1.5 | AprisaXEHardwareVersion | RO | ||||||||||
column · AprisaXEHardwareVersion · read-only · current Field indicating the firmware version for the board in the slot. | |||||||||||||
| CaprisaXEBoardHSCNumber | 1.3.6.1.4.1.14817.7.3.1.2.66.1.6 | AprisaXEHardwareVersion | RO | ||||||||||
column · AprisaXEHardwareVersion · read-only · current Field indicating the hardware software configuration number for the board in the slot. | |||||||||||||
| CaprisaXEBoardSerialNumber | 1.3.6.1.4.1.14817.7.3.1.2.66.1.7 | FourRFSerialNumber | RO | ||||||||||
column · FourRFSerialNumber · read-only · current Field indicating the module serial number for the card in the slot. | |||||||||||||
| NaprisaXELinkAlarms | 1.3.6.1.4.1.14817.7.3.1.2.86 | ||||||||||||
| NaprisaXETransmitterAlarms | 1.3.6.1.4.1.14817.7.3.1.2.86.1 | ||||||||||||
| NaprisaXEForwardPowerHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.1 | ||||||||||||
| SaprisaXEForwardPowerHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.1.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the forward power too high alarm. | |||||||||||||
| SaprisaXEForwardPowerHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.1.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the forward power too high alarm. | |||||||||||||
| SaprisaXEForwardPowerHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.1.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the forward power too high alarm is enabled. | |||||||||||||
| SaprisaXEForwardPowerHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.1.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the forward power too high alarm will be set. | |||||||||||||
| SaprisaXEForwardPowerHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.1.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the forward power alarm will be cleared. | |||||||||||||
| NaprisaXEForwardPowerLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.2 | ||||||||||||
| SaprisaXEForwardPowerLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.2.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the forward power too low alarm. | |||||||||||||
| SaprisaXEForwardPowerLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.2.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the forward power too low alarm. | |||||||||||||
| SaprisaXEForwardPowerLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.2.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the forward power too low alarm is enabled. | |||||||||||||
| SaprisaXEForwardPowerLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.2.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the forward power too low alarm will be set. | |||||||||||||
| SaprisaXEForwardPowerLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.2.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the forward power too low alarm will be cleared. | |||||||||||||
| NaprisaXEReversePowerHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.3 | ||||||||||||
| SaprisaXEReversePowerHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.3.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the reverse power out of limits alarm. | |||||||||||||
| SaprisaXEReversePowerHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.3.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the reverse power out of limits alarm. | |||||||||||||
| SaprisaXEReversePowerHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.3.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the reverse power out of limits alarm is enabled. | |||||||||||||
| SaprisaXEReversePowerHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.3.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the reverse power alarm will be set. | |||||||||||||
| SaprisaXEReversePowerHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.3.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the reverse power alarm will be cleared. | |||||||||||||
| NaprisaXEReversePowerLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.4 | ||||||||||||
| SaprisaXEReversePowerLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.4.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the reverse power out of limits alarm. | |||||||||||||
| SaprisaXEReversePowerLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.4.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the reverse power out of limits alarm. | |||||||||||||
| SaprisaXEReversePowerLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.4.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the reverse power out of limits alarm is enabled. | |||||||||||||
| SaprisaXEReversePowerLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.4.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the reverse power alarm will be set. | |||||||||||||
| SaprisaXEReversePowerLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.4.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the reverse power alarm will be cleared. | |||||||||||||
| NaprisaXETxPaTempAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.5 | ||||||||||||
| SaprisaXETxPaTempAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.5.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter temperature too high alarm. | |||||||||||||
| SaprisaXETxPaTempAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.5.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter temperature too high alarm. | |||||||||||||
| SaprisaXETxPaTempAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.5.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter temperature too high alarm is enabled. | |||||||||||||
| SaprisaXETxPaTempAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.5.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter temperature too high alarm will be set. | |||||||||||||
| SaprisaXETxPaTempAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.5.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter temperature too high will be cleared. | |||||||||||||
| NaprisaXETxPaTempWarnAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.6 | ||||||||||||
| SaprisaXETxPaTempWarnAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.6.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter temperature warning alarm. | |||||||||||||
| SaprisaXETxPaTempWarnAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.6.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter temperature warning alarm. | |||||||||||||
| SaprisaXETxPaTempWarnAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.6.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter temperature warning alarm is enabled. | |||||||||||||
| SaprisaXETxPaTempWarnAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.6.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter temperature warning alarm will be set. | |||||||||||||
| SaprisaXETxPaTempWarnAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.6.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter temperature warning will be cleared. | |||||||||||||
| NaprisaXETxAgcHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.7 | ||||||||||||
| SaprisaXETxAgcHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.7.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter AGC too high alarm. | |||||||||||||
| SaprisaXETxAgcHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.7.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter AGC too high alarm. | |||||||||||||
| SaprisaXETxAgcHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.7.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter AGC too high alarm is enabled. | |||||||||||||
| SaprisaXETxAgcHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.7.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter AGC too high alarm will be set. | |||||||||||||
| SaprisaXETxAgcHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.7.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter AGC too high will be cleared. | |||||||||||||
| NaprisaXETxAgcLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.8 | ||||||||||||
| SaprisaXETxAgcLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.8.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter AGC too low alarm. | |||||||||||||
| SaprisaXETxAgcLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.8.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter AGC too low alarm. | |||||||||||||
| SaprisaXETxAgcLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.8.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter AGC too low alarm is enabled. | |||||||||||||
| SaprisaXETxAgcLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.8.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter AGC too low alarm will be set. | |||||||||||||
| SaprisaXETxAgcLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.8.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter AGC too low will be cleared. | |||||||||||||
| NaprisaXETxVtuneHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.9 | ||||||||||||
| SaprisaXETxVtuneHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.9.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter VTUNE too high alarm. | |||||||||||||
| SaprisaXETxVtuneHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.9.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter VTUNE too high alarm. | |||||||||||||
| SaprisaXETxVtuneHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.9.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter VTUNE too high alarm is enabled. | |||||||||||||
| SaprisaXETxVtuneHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.9.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter VTUNE too high alarm will be set. | |||||||||||||
| SaprisaXETxVtuneHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.9.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter VTUNE too high will be cleared. | |||||||||||||
| NaprisaXETxVtuneLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.10 | ||||||||||||
| SaprisaXETxVtuneLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.10.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter VTUNE too low alarm. | |||||||||||||
| SaprisaXETxVtuneLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.10.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter VTUNE too low alarm. | |||||||||||||
| SaprisaXETxVtuneLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.10.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter VTUNE too low alarm is enabled. | |||||||||||||
| SaprisaXETxVtuneLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.10.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter VTUNE too low alarm will be set. | |||||||||||||
| SaprisaXETxVtuneLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.10.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter VTUNE too low will be cleared. | |||||||||||||
| NaprisaXETx5VDigHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.11 | ||||||||||||
| SaprisaXETx5VDigHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.11.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 5V digital voltage too high alarm. | |||||||||||||
| SaprisaXETx5VDigHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.11.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 5V digital voltage too high alarm. | |||||||||||||
| SaprisaXETx5VDigHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.11.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 5V digital voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETx5VDigHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.11.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 5V digital voltage too high alarm will be set. | |||||||||||||
| SaprisaXETx5VDigHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.11.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 5V digital voltage too high will be cleared. | |||||||||||||
| NaprisaXETx5VDigLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.12 | ||||||||||||
| SaprisaXETx5VDigLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.12.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 5V digital voltage too low alarm. | |||||||||||||
| SaprisaXETx5VDigLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.12.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 5V digital voltage too low alarm. | |||||||||||||
| SaprisaXETx5VDigLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.12.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 5V digital voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETx5VDigLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.12.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 5V digital voltage too low alarm will be set. | |||||||||||||
| SaprisaXETx5VDigLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.12.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 5V digital voltage too low will be cleared. | |||||||||||||
| NaprisaXETx7VRfHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.13 | ||||||||||||
| SaprisaXETx7VRfHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.13.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 7V RF voltage too high alarm. | |||||||||||||
| SaprisaXETx7VRfHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.13.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 7V RF voltage too high alarm. | |||||||||||||
| SaprisaXETx7VRfHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.13.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 7V RF voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETx7VRfHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.13.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 7V RF voltage too high alarm will be set. | |||||||||||||
| SaprisaXETx7VRfHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.13.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 7V RF voltage too high will be cleared. | |||||||||||||
| NaprisaXETx7VRfLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.14 | ||||||||||||
| SaprisaXETx7VRfLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.14.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 7V RF voltage too low alarm. | |||||||||||||
| SaprisaXETx7VRfLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.14.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 7V RF voltage too low alarm. | |||||||||||||
| SaprisaXETx7VRfLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.14.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 7V RF voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETx7VRfLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.14.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 7V RF voltage too low alarm will be set. | |||||||||||||
| SaprisaXETx7VRfLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.14.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 7V RF voltage too low will be cleared. | |||||||||||||
| NaprisaXETx9VHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.15 | ||||||||||||
| SaprisaXETx9VHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.15.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 9V voltage too high alarm. | |||||||||||||
| SaprisaXETx9VHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.15.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 9V voltage too high alarm. | |||||||||||||
| SaprisaXETx9VHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.15.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 9V voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETx9VHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.15.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 9V voltage too high alarm will be set. | |||||||||||||
| SaprisaXETx9VHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.15.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 9V voltage too high will be cleared. | |||||||||||||
| NaprisaXETx9VLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.16 | ||||||||||||
| SaprisaXETx9VLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.16.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 9V voltage too low alarm. | |||||||||||||
| SaprisaXETx9VLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.16.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 9V voltage too low alarm. | |||||||||||||
| SaprisaXETx9VLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.16.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 9V voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETx9VLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.16.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 9V voltage too low alarm will be set. | |||||||||||||
| SaprisaXETx9VLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.16.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 9V voltage too low will be cleared. | |||||||||||||
| NaprisaXETx11VHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.17 | ||||||||||||
| SaprisaXETx11VHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.17.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 11V voltage too high alarm. | |||||||||||||
| SaprisaXETx11VHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.17.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 11V voltage too high alarm. | |||||||||||||
| SaprisaXETx11VHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.17.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 11V voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETx11VHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.17.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 11V voltage too high alarm will be set. | |||||||||||||
| SaprisaXETx11VHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.17.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 11V voltage too high will be cleared. | |||||||||||||
| NaprisaXETx11VLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.18 | ||||||||||||
| SaprisaXETx11VLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.18.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 11V voltage too low alarm. | |||||||||||||
| SaprisaXETx11VLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.18.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 11V voltage too low alarm. | |||||||||||||
| SaprisaXETx11VLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.18.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 11V voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETx11VLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.18.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 11V voltage too low alarm will be set. | |||||||||||||
| SaprisaXETx11VLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.18.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 11V voltage too low will be cleared. | |||||||||||||
| NaprisaXETx28VHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.19 | ||||||||||||
| SaprisaXETx28VHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.19.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 28V voltage too high alarm. | |||||||||||||
| SaprisaXETx28VHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.19.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 28V voltage too high alarm. | |||||||||||||
| SaprisaXETx28VHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.19.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 28V voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETx28VHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.19.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 28V voltage too high alarm will be set. | |||||||||||||
| SaprisaXETx28VHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.19.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 28V voltage too high will be cleared. | |||||||||||||
| NaprisaXETx28VLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.20 | ||||||||||||
| SaprisaXETx28VLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the transmitter 28V voltage too low alarm. | |||||||||||||
| SaprisaXETx28VLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the transmitter 28V voltage too low alarm. | |||||||||||||
| SaprisaXETx28VLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the transmitter 28V voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETx28VLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 28V voltage too low alarm will be set. | |||||||||||||
| SaprisaXETx28VLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.20.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the transmitter 28V voltage too low will be cleared. | |||||||||||||
| NaprisaXETxSynthOutOfLockAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.21 | ||||||||||||
| SaprisaXETxSynthOutOfLockAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.21.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the TX synth out of lock alarm. | |||||||||||||
| SaprisaXETxSynthOutOfLockAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.21.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the TX synth out of lock alarm. | |||||||||||||
| SaprisaXETxSynthOutOfLockAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.21.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the TX synth out of lock alarm is enabled. | |||||||||||||
| NaprisaXEReturnLossHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.22 | ||||||||||||
| SaprisaXEReturnLossHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.22.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the return loss out of limits alarm. | |||||||||||||
| SaprisaXEReturnLossHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.22.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the return loss out of limits alarm. | |||||||||||||
| SaprisaXEReturnLossHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.22.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the return loss out of limits alarm is enabled. | |||||||||||||
| SaprisaXEReturnLossHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.22.4 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Indicates the level at which the return loss alarm will be set. | |||||||||||||
| SaprisaXEReturnLossHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.22.5 | Integer32 | RW | ||||||||||
scalar · Integer32 · read-write · current Indicates the level at which the return loss alarm will be cleared. | |||||||||||||
| NaprisaXETxADCChZeroHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23 | ||||||||||||
| SaprisaXETxADCChZeroHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Zero voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChZeroHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Zero voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChZeroHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Zero voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChZeroHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Zero voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChZeroHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Zero voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChZeroHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.23.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Zero voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChZeroLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24 | ||||||||||||
| SaprisaXETxADCChZeroLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Zero voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChZeroLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Zero voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChZeroLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Zero voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChZeroLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Zero voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChZeroLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChZeroLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.24.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Zero voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChOneHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25 | ||||||||||||
| SaprisaXETxADCChOneHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch One voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChOneHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch One voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChOneHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch One voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChOneHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch One voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChOneHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch One voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChOneHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.25.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch One voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChOneLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26 | ||||||||||||
| SaprisaXETxADCChOneLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch One voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChOneLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch One voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChOneLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch One voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChOneLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch One voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChOneLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch One voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChOneLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.26.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch One voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChTwoHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27 | ||||||||||||
| SaprisaXETxADCChTwoHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Two voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChTwoHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Two voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChTwoHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Two voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChTwoHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Two voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChTwoHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Two voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChTwoHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.27.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Two voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChTwoLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28 | ||||||||||||
| SaprisaXETxADCChTwoLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Two voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChTwoLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Two voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChTwoLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Two voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChTwoLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Two voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChTwoLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Two voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChTwoLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.28.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Two voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChThreeHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29 | ||||||||||||
| SaprisaXETxADCChThreeHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Three voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChThreeHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Three voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChThreeHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Three voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChThreeHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Three voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChThreeHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Three voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChThreeHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.29.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Three voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChThreeLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30 | ||||||||||||
| SaprisaXETxADCChThreeLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Three voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChThreeLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Three voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChThreeLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Three voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChThreeLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Three voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChThreeLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Three voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChThreeLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.30.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Three voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChFourHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31 | ||||||||||||
| SaprisaXETxADCChFourHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Four voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChFourHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Four voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChFourHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Four voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChFourHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Four voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChFourHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Four voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChFourHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.31.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Four voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChFourLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32 | ||||||||||||
| SaprisaXETxADCChFourLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Four voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChFourLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Four voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChFourLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Four voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChFourLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Four voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChFourLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Four voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChFourLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.32.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Four voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChFiveHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33 | ||||||||||||
| SaprisaXETxADCChFiveHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Five voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChFiveHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Five voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChFiveHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Five voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChFiveHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Five voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChFiveHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Five voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChFiveHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.33.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Five voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChFiveLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34 | ||||||||||||
| SaprisaXETxADCChFiveLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Five voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChFiveLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Five voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChFiveLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Five voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChFiveLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Five voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChFiveLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Five voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChFiveLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.34.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Five voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChSixHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35 | ||||||||||||
| SaprisaXETxADCChSixHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Six voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChSixHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Six voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChSixHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Six voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChSixHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Six voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChSixHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Six voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChSixHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.35.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Six voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChSixLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36 | ||||||||||||
| SaprisaXETxADCChSixLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Six voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChSixLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Six voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChSixLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Six voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChSixLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Six voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChSixLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Six voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChSixLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.36.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Six voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChSevenHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37 | ||||||||||||
| SaprisaXETxADCChSevenHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Seven voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChSevenHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Seven voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChSevenHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Seven voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChSevenHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Seven voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChSevenHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Seven voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChSevenHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.37.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Seven voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChSevenLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38 | ||||||||||||
| SaprisaXETxADCChSevenLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Seven voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChSevenLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Seven voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChSevenLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Seven voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChSevenLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Seven voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChSevenLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChSevenLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.38.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Seven voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChEightHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39 | ||||||||||||
| SaprisaXETxADCChEightHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Eight voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChEightHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Eight voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChEightHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Eight voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChEightHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Eight voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChEightHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Eight voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChEightHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.39.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Eight voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChEightLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40 | ||||||||||||
| SaprisaXETxADCChEightLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Eight voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChEightLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Eight voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChEightLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Eight voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChEightLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Eight voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChEightLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChEightLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.40.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Eight voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChNineHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41 | ||||||||||||
| SaprisaXETxADCChNineHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Nine voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChNineHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Nine voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChNineHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Nine voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChNineHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Nine voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChNineHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Nine voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChNineHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.41.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Nine voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChNineLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42 | ||||||||||||
| SaprisaXETxADCChNineLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Nine voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChNineLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Nine voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChNineLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Nine voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChNineLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Nine voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChNineLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChNineLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.42.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Nine voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChTenHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43 | ||||||||||||
| SaprisaXETxADCChTenHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Ten voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChTenHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Ten voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChTenHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Ten voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChTenHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Ten voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChTenHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Ten voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChTenHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.43.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Ten voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChTenLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44 | ||||||||||||
| SaprisaXETxADCChTenLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Ten voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChTenLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Ten voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChTenLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Ten voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChTenLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Ten voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChTenLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChTenLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.44.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Ten voltage too low will be cleared. | |||||||||||||
| NaprisaXETxADCChElevenHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45 | ||||||||||||
| SaprisaXETxADCChElevenHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Eleven voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChElevenHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Eleven voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChElevenHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Eleven voltage too high alarm. | |||||||||||||
| SaprisaXETxADCChElevenHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Eleven voltage too high alarm is enabled. | |||||||||||||
| SaprisaXETxADCChElevenHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Eleven voltage too high alarm will be set. | |||||||||||||
| SaprisaXETxADCChElevenHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.45.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the transmitter ADC Ch Eleven voltage too high will be cleared. | |||||||||||||
| NaprisaXETxADCChElevenLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46 | ||||||||||||
| SaprisaXETxADCChElevenLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the transmitter ADC Ch Eleven voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChElevenLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the transmitter ADC Ch Eleven voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChElevenLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the transmitter ADC Ch Eleven voltage too low alarm. | |||||||||||||
| SaprisaXETxADCChElevenLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the transmitter ADC Ch Eleven voltage too low alarm is enabled. | |||||||||||||
| SaprisaXETxADCChElevenLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low alarm will be set. | |||||||||||||
| SaprisaXETxADCChElevenLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.1.46.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the transmitter ADC Ch Eleven voltage too low will be cleared. | |||||||||||||
| NaprisaXEReceiverAlarms | 1.3.6.1.4.1.14817.7.3.1.2.86.6 | ||||||||||||
| NaprisaXERxSynthOutOfLockAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.1 | ||||||||||||
| SaprisaXERxSynthOutOfLockAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.1.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the Synth out of lock alarm. | |||||||||||||
| SaprisaXERxSynthOutOfLockAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.1.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the Synth out of lock alarm. | |||||||||||||
| SaprisaXERxSynthOutOfLockAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.1.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the Synth out of lock alarm is enabled. | |||||||||||||
| NaprisaXERx12VAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.3 | ||||||||||||
| SaprisaXERx12VAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.3.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the 12V supply alarm. | |||||||||||||
| SaprisaXERx12VAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.3.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the 12V supply aprisaXERxVtuneLoAlarmalarm. | |||||||||||||
| SaprisaXERx12VAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.3.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the 12V supply alarm is enabled. | |||||||||||||
| NaprisaXERx3V3HiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.4 | ||||||||||||
| SaprisaXERx3V3HiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.4.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the 3.3V supply high alarm. | |||||||||||||
| SaprisaXERx3V3HiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.4.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the 3.3V supply high alarm. | |||||||||||||
| SaprisaXERx3V3HiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.4.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the 3.3V supply high alarm is enabled. | |||||||||||||
| SaprisaXERx3V3HiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.4.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 3.3V supply high alarm will be set. | |||||||||||||
| SaprisaXERx3V3HiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.4.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 3.3V supply high will be cleared. | |||||||||||||
| NaprisaXERx3V3LoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.5 | ||||||||||||
| SaprisaXERx3V3LoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.5.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the 3.3V supply low alarm. | |||||||||||||
| SaprisaXERx3V3LoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.5.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the 3.3V supply low alarm. | |||||||||||||
| SaprisaXERx3V3LoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.5.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the 3.3V supply low alarm is enabled. | |||||||||||||
| SaprisaXERx3V3LoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.5.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 3.3V supply low alarm will be set. | |||||||||||||
| SaprisaXERx3V3LoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.5.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 3.3V supply low will be cleared. | |||||||||||||
| NaprisaXERx5VHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.6 | ||||||||||||
| SaprisaXERx5VHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.6.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the 5V supply High alarm. | |||||||||||||
| SaprisaXERx5VHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.6.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the 5V supply High alarm. | |||||||||||||
| SaprisaXERx5VHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.6.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the 5V supply High alarm is enabled. | |||||||||||||
| SaprisaXERx5VHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.6.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 5V supply High alarm will be set. | |||||||||||||
| SaprisaXERx5VHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.6.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 5V supply High will be cleared. | |||||||||||||
| NaprisaXERx5VLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.7 | ||||||||||||
| SaprisaXERx5VLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.7.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the 5V supply low alarm. | |||||||||||||
| SaprisaXERx5VLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.7.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the 5V supply low alarm. | |||||||||||||
| SaprisaXERx5VLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.7.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the 5V supply low alarm is enabled. | |||||||||||||
| SaprisaXERx5VLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.7.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 5V supply low alarm will be set. | |||||||||||||
| SaprisaXERx5VLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.7.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 5V supply low will be cleared. | |||||||||||||
| NaprisaXERx9VHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.8 | ||||||||||||
| SaprisaXERx9VHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.8.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the 9V supply High alarm. | |||||||||||||
| SaprisaXERx9VHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.8.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the 9V supply High alarm. | |||||||||||||
| SaprisaXERx9VHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.8.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the 9V supply High alarm is enabled. | |||||||||||||
| SaprisaXERx9VHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.8.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 9V supply High alarm will be set. | |||||||||||||
| SaprisaXERx9VHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.8.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 9V supply High will be cleared. | |||||||||||||
| NaprisaXERx9VLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.9 | ||||||||||||
| SaprisaXERx9VLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.9.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the 9V supply low alarm. | |||||||||||||
| SaprisaXERx9VLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.9.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the 9V supply low alarm. | |||||||||||||
| SaprisaXERx9VLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.9.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the 9V supply low alarm is enabled. | |||||||||||||
| SaprisaXERx9VLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.9.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 9V supply low alarm will be set. | |||||||||||||
| SaprisaXERx9VLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.9.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the 9V supply low will be cleared. | |||||||||||||
| NaprisaXERxNeg1V5HiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.10 | ||||||||||||
| SaprisaXERxNeg1V5HiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.10.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the Neg 1.5V supply High alarm. | |||||||||||||
| SaprisaXERxNeg1V5HiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.10.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the Neg 1.5V supply High alarm. | |||||||||||||
| SaprisaXERxNeg1V5HiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.10.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the Neg 1.5V supply High alarm is enabled. | |||||||||||||
| SaprisaXERxNeg1V5HiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.10.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Neg 1.5V supply High alarm will be set. | |||||||||||||
| SaprisaXERxNeg1V5HiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.10.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Neg 1.5V supply High will be cleared. | |||||||||||||
| NaprisaXERxNeg1V5LoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.11 | ||||||||||||
| SaprisaXERxNeg1V5LoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.11.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the Neg 1.5V supply low alarm. | |||||||||||||
| SaprisaXERxNeg1V5LoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.11.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the Neg 1.5V supply low alarm. | |||||||||||||
| SaprisaXERxNeg1V5LoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.11.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the Neg 1.5V supply low alarm is enabled. | |||||||||||||
| SaprisaXERxNeg1V5LoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.11.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Neg 1.5V supply low alarm will be set. | |||||||||||||
| SaprisaXERxNeg1V5LoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.11.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Neg 1.5V supply low will be cleared. | |||||||||||||
| NaprisaXERxAgcHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.12 | ||||||||||||
| SaprisaXERxAgcHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.12.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the AGC high alarm. | |||||||||||||
| SaprisaXERxAgcHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.12.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the AGC high alarm. | |||||||||||||
| SaprisaXERxAgcHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.12.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the AGC high alarm is enabled. | |||||||||||||
| SaprisaXERxAgcHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.12.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the AGC high alarm will be set. | |||||||||||||
| SaprisaXERxAgcHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.12.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the AGC high will be cleared. | |||||||||||||
| NaprisaXERxAgcLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.13 | ||||||||||||
| SaprisaXERxAgcLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.13.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the AGC low alarm. | |||||||||||||
| SaprisaXERxAgcLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.13.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the AGC low alarm. | |||||||||||||
| SaprisaXERxAgcLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.13.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the AGC low alarm is enabled. | |||||||||||||
| SaprisaXERxAgcLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.13.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the AGC low alarm will be set. | |||||||||||||
| SaprisaXERxAgcLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.13.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the AGC low will be cleared. | |||||||||||||
| NaprisaXERxRssiHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.14 | ||||||||||||
| SaprisaXERxRssiHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.14.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the RSSI High alarm. | |||||||||||||
| SaprisaXERxRssiHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.14.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the RSSI High alarm. | |||||||||||||
| SaprisaXERxRssiHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.14.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the RSSI High alarm is enabled. | |||||||||||||
| SaprisaXERxRssiHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.14.4 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the RSSI High alarm will be set. | |||||||||||||
| SaprisaXERxRssiHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.14.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the RSSI High will be cleared. | |||||||||||||
| NaprisaXERxRssiLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.15 | ||||||||||||
| SaprisaXERxRssiLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.15.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the RSSI low alarm. | |||||||||||||
| SaprisaXERxRssiLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.15.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the RSSI low alarm. | |||||||||||||
| SaprisaXERxRssiLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.15.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the RSSI low alarm is enabled. | |||||||||||||
| SaprisaXERxRssiLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.15.4 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the RSSI low alarm will be set. | |||||||||||||
| SaprisaXERxRssiLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.15.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the RSSI low will be cleared. | |||||||||||||
| NaprisaXERxVtuneHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.16 | ||||||||||||
| SaprisaXERxVtuneHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.16.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the Vtune High alarm. | |||||||||||||
| SaprisaXERxVtuneHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.16.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the Vtune High alarm. | |||||||||||||
| SaprisaXERxVtuneHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.16.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the Vtune High alarm is enabled. | |||||||||||||
| SaprisaXERxVtuneHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.16.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Vtune High alarm will be set. | |||||||||||||
| SaprisaXERxVtuneHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.16.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Vtune High will be cleared. | |||||||||||||
| NaprisaXERxVtuneLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.17 | ||||||||||||
| SaprisaXERxVtuneLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.17.1 | FourRFAlarmStatus | RO | obsolete | |||||||||
scalar · FourRFAlarmStatus · read-only · obsolete The status of the Vtune low alarm. | |||||||||||||
| SaprisaXERxVtuneLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.17.2 | FourRFAlarmSeverity | RO | obsolete | |||||||||
scalar · FourRFAlarmSeverity · read-only · obsolete The severity of the Vtune low alarm. | |||||||||||||
| SaprisaXERxVtuneLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.17.3 | FourRFAlarmEnabled | RO | obsolete | |||||||||
scalar · FourRFAlarmEnabled · read-only · obsolete Indicates whether the Vtune low alarm is enabled. | |||||||||||||
| SaprisaXERxVtuneLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.17.4 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Vtune low alarm will be set. | |||||||||||||
| SaprisaXERxVtuneLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.17.5 | Integer32 | RO | obsolete | |||||||||
scalar · Integer32 · read-only · obsolete Indicates the level at which the Vtune low will be cleared. | |||||||||||||
| NaprisaXERxEEAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.18 | ||||||||||||
| SaprisaXERxEEAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.18.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the EEPROM alarm. | |||||||||||||
| SaprisaXERxEEAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.18.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the EEPROM alarm. | |||||||||||||
| SaprisaXERxEEAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.18.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the EEPROM alarm is enabled. | |||||||||||||
| NaprisaXERxADCChZeroHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19 | ||||||||||||
| SaprisaXERxADCChZeroHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Zero voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChZeroHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Zero voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChZeroHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Zero voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChZeroHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Zero voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChZeroHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Zero voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChZeroHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.19.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Zero voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChZeroLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20 | ||||||||||||
| SaprisaXERxADCChZeroLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Zero voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChZeroLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Zero voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChZeroLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Zero voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChZeroLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Zero voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChZeroLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Zero voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChZeroLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.20.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Zero voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChOneHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21 | ||||||||||||
| SaprisaXERxADCChOneHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch One voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChOneHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch One voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChOneHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch One voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChOneHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch One voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChOneHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch One voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChOneHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.21.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch One voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChOneLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22 | ||||||||||||
| SaprisaXERxADCChOneLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch One voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChOneLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch One voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChOneLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch One voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChOneLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch One voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChOneLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch One voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChOneLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.22.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch One voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChTwoHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23 | ||||||||||||
| SaprisaXERxADCChTwoHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Two voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChTwoHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Two voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChTwoHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Two voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChTwoHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Two voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChTwoHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Two voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChTwoHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.23.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Two voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChTwoLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24 | ||||||||||||
| SaprisaXERxADCChTwoLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Two voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChTwoLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Two voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChTwoLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Two voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChTwoLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Two voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChTwoLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Two voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChTwoLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.24.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Two voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChThreeHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25 | ||||||||||||
| SaprisaXERxADCChThreeHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Three voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChThreeHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Three voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChThreeHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Three voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChThreeHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Three voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChThreeHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Three voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChThreeHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.25.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Three voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChThreeLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26 | ||||||||||||
| SaprisaXERxADCChThreeLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Three voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChThreeLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Three voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChThreeLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Three voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChThreeLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Three voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChThreeLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Three voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChThreeLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.26.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Three voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChFourHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27 | ||||||||||||
| SaprisaXERxADCChFourHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Four voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChFourHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Four voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChFourHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Four voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChFourHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Four voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChFourHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Four voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChFourHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.27.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Four voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChFourLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28 | ||||||||||||
| SaprisaXERxADCChFourLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Four voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChFourLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Four voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChFourLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Four voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChFourLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Four voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChFourLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Four voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChFourLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.28.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Four voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChFiveHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29 | ||||||||||||
| SaprisaXERxADCChFiveHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Five voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChFiveHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Five voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChFiveHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Five voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChFiveHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Five voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChFiveHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Five voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChFiveHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.29.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Five voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChFiveLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30 | ||||||||||||
| SaprisaXERxADCChFiveLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Five voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChFiveLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Five voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChFiveLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Five voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChFiveLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Five voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChFiveLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Five voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChFiveLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.30.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Five voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChSixHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31 | ||||||||||||
| SaprisaXERxADCChSixHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Six voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChSixHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Six voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChSixHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Six voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChSixHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Six voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChSixHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Six voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChSixHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.31.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Six voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChSixLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32 | ||||||||||||
| SaprisaXERxADCChSixLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Six voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChSixLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Six voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChSixLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Six voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChSixLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Six voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChSixLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Six voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChSixLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.32.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Six voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChSevenHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33 | ||||||||||||
| SaprisaXERxADCChSevenHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Seven voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChSevenHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Seven voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChSevenHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Seven voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChSevenHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Seven voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChSevenHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Seven voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChSevenHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.33.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Seven voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChSevenLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34 | ||||||||||||
| SaprisaXERxADCChSevenLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Seven voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChSevenLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Seven voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChSevenLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Seven voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChSevenLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Seven voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChSevenLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Seven voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChSevenLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.34.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Seven voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChEightHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35 | ||||||||||||
| SaprisaXERxADCChEightHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Eight voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChEightHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Eight voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChEightHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Eight voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChEightHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Eight voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChEightHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Eight voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChEightHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.35.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Eight voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChEightLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36 | ||||||||||||
| SaprisaXERxADCChEightLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Eight voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChEightLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Eight voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChEightLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Eight voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChEightLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Eight voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChEightLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Eight voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChEightLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.36.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Eight voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChNineHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37 | ||||||||||||
| SaprisaXERxADCChNineHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Nine voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChNineHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Nine voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChNineHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Nine voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChNineHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Nine voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChNineHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Nine voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChNineHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.37.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Nine voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChNineLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38 | ||||||||||||
| SaprisaXERxADCChNineLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Nine voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChNineLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Nine voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChNineLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Nine voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChNineLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Nine voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChNineLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Nine voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChNineLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.38.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Nine voltage too low will be cleared. | |||||||||||||
| NaprisaXERxADCChTenHiAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39 | ||||||||||||
| SaprisaXERxADCChTenHiAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Ten voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChTenHiAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Ten voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChTenHiAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Ten voltage too high alarm. | |||||||||||||
| SaprisaXERxADCChTenHiAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Ten voltage too high alarm is enabled. | |||||||||||||
| SaprisaXERxADCChTenHiAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Ten voltage too high alarm will be set. | |||||||||||||
| SaprisaXERxADCChTenHiAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.39.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at which the receiver ADC Ch Ten voltage too high will be cleared. | |||||||||||||
| NaprisaXERxADCChTenLoAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40 | ||||||||||||
| SaprisaXERxADCChTenLoAlarmName | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The name of the receiver ADC Ch Ten voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChTenLoAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40.2 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the receiver ADC Ch Ten voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChTenLoAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40.3 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the receiver ADC Ch Ten voltage too low alarm. | |||||||||||||
| SaprisaXERxADCChTenLoAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40.4 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the receiver ADC Ch Ten voltage too low alarm is enabled. | |||||||||||||
| SaprisaXERxADCChTenLoAlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Ten voltage too low alarm will be set. | |||||||||||||
| SaprisaXERxADCChTenLoAlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.86.6.40.6 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Indicates the level at wLoch the receiver ADC Ch Ten voltage too low will be cleared. | |||||||||||||
| NaprisaXEModemAlarms | 1.3.6.1.4.1.14817.7.3.1.2.86.10 | ||||||||||||
| NaprisaXEModemSyncAlarm | 1.3.6.1.4.1.14817.7.3.1.2.86.10.1 | ||||||||||||
| SaprisaXEModemSyncAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.86.10.1.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current The status of the loss of modem sync alarm. | |||||||||||||
| SaprisaXEModemSyncAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.86.10.1.2 | FourRFAlarmSeverity | RO | ||||||||||
scalar · FourRFAlarmSeverity · read-only · current The severity of the loss of modem sync alarm. | |||||||||||||
| SaprisaXEModemSyncAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.86.10.1.3 | FourRFAlarmEnabled | RO | ||||||||||
scalar · FourRFAlarmEnabled · read-only · current Indicates whether the loss of modem sync alarm is enabled. | |||||||||||||
| TaprisaXEQuadJetBoardTable | 1.3.6.1.4.1.14817.7.3.1.2.87 | NA | |||||||||||
table · not-accessible · current Table of Quad E1 card specific configuration details. | |||||||||||||
| RaprisaXEQuadJetBoardEntry | 1.3.6.1.4.1.14817.7.3.1.2.87.1 | NA | |||||||||||
| CaprisaXEQuadJetBoardTableIndex | 1.3.6.1.4.1.14817.7.3.1.2.87.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Quad E1 board indexed by slot. | |||||||||||||
| TaprisaXEQuadJetPortTable | 1.3.6.1.4.1.14817.7.3.1.2.88 | NA | |||||||||||
table · not-accessible · current Table based on slot and port of QuadJet cards alarms. | |||||||||||||
| RaprisaXEQuadJetPortEntry | 1.3.6.1.4.1.14817.7.3.1.2.88.1 | NA | |||||||||||
row · not-accessible · current Quad E1 port alarms. | |||||||||||||
| CaprisaXEQuadJetPortTableSlot | 1.3.6.1.4.1.14817.7.3.1.2.88.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Port table index based on slot number. | |||||||||||||
| CaprisaXEQuadJetPortTablePort | 1.3.6.1.4.1.14817.7.3.1.2.88.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port table index based on port number. | |||||||||||||
| CaprisaXEQuadJetLOFAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.3 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current Red alarm status. | |||||||||||||
| CaprisaXEQuadJetLOFAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.4 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current Red alarm severity. | |||||||||||||
| CaprisaXEQuadJetLOFAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.5 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current Red alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetAISAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.6 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current AIS alarm status. | |||||||||||||
| CaprisaXEQuadJetAISAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.7 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current AIS alarm severity. | |||||||||||||
| CaprisaXEQuadJetAISAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.8 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current AIS alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetRAIAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.9 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current RAI alarm status. | |||||||||||||
| CaprisaXEQuadJetRAIAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.10 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current RAI alarm severity. | |||||||||||||
| CaprisaXEQuadJetRAIAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.11 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current RAI alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetRMAIAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.12 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current RMAI alarm status. | |||||||||||||
| CaprisaXEQuadJetRMAIAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.13 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current RMAI alarm severity. | |||||||||||||
| CaprisaXEQuadJetRMAIAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.14 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current RMAI alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetTS16AISAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.15 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current TS16 AIS alarm status. | |||||||||||||
| CaprisaXEQuadJetTS16AISAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.16 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current TS16 AIS alarm severity. | |||||||||||||
| CaprisaXEQuadJetTS16AISAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.17 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current TS16 AIS alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetTS16LOSAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.18 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current TS16 LOS alarm status. | |||||||||||||
| CaprisaXEQuadJetTS16LOSAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.19 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current TS16 LOS alarm severity. | |||||||||||||
| CaprisaXEQuadJetTS16LOSAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.20 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current TS16 LOS alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetLOSAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.21 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current LOS alarm status. | |||||||||||||
| CaprisaXEQuadJetLOSAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.22 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current LOS alarm severity. | |||||||||||||
| CaprisaXEQuadJetLOSAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.23 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current LOS alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetCRC4AlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.88.1.24 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current CRC4 alarm status. | |||||||||||||
| CaprisaXEQuadJetCRC4AlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.88.1.25 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current CRC4 alarm severity. | |||||||||||||
| CaprisaXEQuadJetCRC4AlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.88.1.26 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current CRC4 alarm enabled or disabled. | |||||||||||||
| CaprisaXEQuadJetCRC4AlarmThreshold | 1.3.6.1.4.1.14817.7.3.1.2.88.1.27 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current CRC4 Threshold value for counter to alarm at. | |||||||||||||
| CaprisaXEQuadJetCRC4AlarmClearThreshold | 1.3.6.1.4.1.14817.7.3.1.2.88.1.28 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current CRC4 Threshold at which alarm clears. | |||||||||||||
| TaprisaXEQuadJetIFConfigTable | 1.3.6.1.4.1.14817.7.3.1.2.90 | NA | |||||||||||
table · not-accessible · current Switch data table which describes the allocation of user data on to the TDM busses. | |||||||||||||
| RaprisaXEQuadJetIFConfigEntry | 1.3.6.1.4.1.14817.7.3.1.2.90.1 | NA | |||||||||||
row · not-accessible · current Quad JET config data. | |||||||||||||
| CaprisaXEQuadJetIFConfigSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.90.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Index to the port table based on port number. | |||||||||||||
| CaprisaXEQuadJetIFConfigPortIndex | 1.3.6.1.4.1.14817.7.3.1.2.90.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Index to the port table based on port number. | |||||||||||||
| CaprisaXEQuadJetTrafficType | 1.3.6.1.4.1.14817.7.3.1.2.90.1.3 | AprisaXEQuadJetTrafficType | RW | ||||||||||
column · AprisaXEQuadJetTrafficType · read-write · current Controls the traffic type on a Quad JET port. | |||||||||||||
| CaprisaXEQuadJetLoopback | 1.3.6.1.4.1.14817.7.3.1.2.90.1.4 | FourRFLoopback | RW | obsolete | |||||||||
column · FourRFLoopback · read-write · obsolete Controls the traffic loopback on a Quad JET port. | |||||||||||||
| CaprisaXEQuadJetLineEncoding | 1.3.6.1.4.1.14817.7.3.1.2.90.1.5 | AprisaXEQuadJetLineEncoding | RW | ||||||||||
column · AprisaXEQuadJetLineEncoding · read-write · current Controls the line encoding, the default is HDB3 for E1, B8ZS for T1. | |||||||||||||
| CaprisaXEQuadJetPcmMode | 1.3.6.1.4.1.14817.7.3.1.2.90.1.6 | AprisaXEPcmMode | RW | ||||||||||
column · AprisaXEPcmMode · read-write · current Controls the PCM mode, PCM31 or PCM30C. | |||||||||||||
| CaprisaXEQuadJetClockSource | 1.3.6.1.4.1.14817.7.3.1.2.90.1.7 | FourRFNetworkClockSelect | RW | ||||||||||
column · FourRFNetworkClockSelect · read-write · current Controls whether the port drives the clock soure or not. | |||||||||||||
| CaprisaXEQuadJetLineRadioLoopback | 1.3.6.1.4.1.14817.7.3.1.2.90.1.8 | AprisaXEQuadJetLoopbacks | RW | ||||||||||
column · AprisaXEQuadJetLoopbacks · read-write · current This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing. | |||||||||||||
| CaprisaXEQuadJetTxWaveFormShaper | 1.3.6.1.4.1.14817.7.3.1.2.90.1.9 | AprisaXEQuadJetWaveFormShapers | RW | ||||||||||
column · AprisaXEQuadJetWaveFormShapers · read-write · current This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft. | |||||||||||||
| CaprisaXEQuadJetMultiframeEnable | 1.3.6.1.4.1.14817.7.3.1.2.90.1.10 | AprisaXEQuadJetMultiframeEnable | RW | ||||||||||
column · AprisaXEQuadJetMultiframeEnable · read-write · current Indicates whether support is enabled for transport of T1 SF and ESF multiframe sync for a port. | |||||||||||||
| TaprisaXEQuadJetIFConnectionTable | 1.3.6.1.4.1.14817.7.3.1.2.91 | NA | |||||||||||
table · not-accessible · current Interface connection table which holds all the cross connect information for the E1 card. | |||||||||||||
| RaprisaXEQuadJetIFConnectionTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.91.1 | NA | |||||||||||
row · not-accessible · current Quad JET cross connection data. | |||||||||||||
| CaprisaXEQuadJetIFConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.91.1.1 | AprisaXEConnectionID | RO | ||||||||||
column · AprisaXEConnectionID · read-only · current Backplane Connection ID. | |||||||||||||
| CaprisaXEQuadJetIFConnectionAggregateID | 1.3.6.1.4.1.14817.7.3.1.2.91.1.2 | AprisaXEConnectionID | RO | ||||||||||
column · AprisaXEConnectionID · read-only · current Aggregate ID, 0 if an unframed connection. | |||||||||||||
| CaprisaXEQuadJetIFConnectionSlot | 1.3.6.1.4.1.14817.7.3.1.2.91.1.3 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot number that this card is in. | |||||||||||||
| CaprisaXEQuadJetIFConnectionE1Port | 1.3.6.1.4.1.14817.7.3.1.2.91.1.4 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port number associated with this connection. | |||||||||||||
| CaprisaXEQuadJetIFConnectionType | 1.3.6.1.4.1.14817.7.3.1.2.91.1.5 | AprisaXEQuadJetConnectionType | RO | ||||||||||
column · AprisaXEQuadJetConnectionType · read-only · current Indicates whether the connection is for data or CAS signalling. | |||||||||||||
| NaprisaXEQuadJetIFConnectionControl | 1.3.6.1.4.1.14817.7.3.1.2.93 | ||||||||||||
| SaprisaXEQuadJetIFControlConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.93.1 | AprisaXEConnectionID | RW | ||||||||||
scalar · AprisaXEConnectionID · read-write · current Backplane Connection ID. | |||||||||||||
| SaprisaXEQuadJetIFControlAggregateID | 1.3.6.1.4.1.14817.7.3.1.2.93.2 | AprisaXEConnectionID | RW | ||||||||||
scalar · AprisaXEConnectionID · read-write · current Aggregate Connection ID. | |||||||||||||
| SaprisaXEQuadJetIFConnectionControlSlot | 1.3.6.1.4.1.14817.7.3.1.2.93.3 | AprisaXESlotNumber | RW | ||||||||||
scalar · AprisaXESlotNumber · read-write · current Slot number that this card is in. | |||||||||||||
| SaprisaXEQuadJetIFConnectionControlE1Port | 1.3.6.1.4.1.14817.7.3.1.2.93.4 | AprisaXEPortNumber | RW | ||||||||||
scalar · AprisaXEPortNumber · read-write · current Port number associated with this connection. | |||||||||||||
| SaprisaXEQuadJetIFConnectionControlType | 1.3.6.1.4.1.14817.7.3.1.2.93.5 | AprisaXEQuadJetConnectionType | RW | ||||||||||
scalar · AprisaXEQuadJetConnectionType · read-write · current Indicates whether the connection is for data or CAS signalling. | |||||||||||||
| SaprisaXEQuadJetIFConnectionControlCommand | 1.3.6.1.4.1.14817.7.3.1.2.93.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to send to act upon the rows in the QuedJet Interface Connection table.
| |||||||||||||
| NaprisaXEEthernetConfiguration | 1.3.6.1.4.1.14817.7.3.1.2.95 | ||||||||||||
| SaprisaXEEthernetBandwidth | 1.3.6.1.4.1.14817.7.3.1.2.95.1 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current This controls the bandwidth allocated to ethernet in kbps, the minimum block is 8kbps, values will be rounded up to the nearest 8kbps. | |||||||||||||
| SaprisaXEEthernetManagementBandwidth | 1.3.6.1.4.1.14817.7.3.1.2.95.2 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current This controls the bandwidth available to management traffic, a minimum of 8kbps is required. Values will be rounded up to the nearest 8kbps. | |||||||||||||
| SaprisaXEEthernetCustomerConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.95.3 | AprisaXEConnectionID | RW | ||||||||||
scalar · AprisaXEConnectionID · read-write · current Backplane connection ID for Customer bandwidth. | |||||||||||||
| SaprisaXEEthernetPBCConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.95.4 | AprisaXEConnectionID | RW | ||||||||||
scalar · AprisaXEConnectionID · read-write · current Backplane connection ID for Private Back Channel management bandwidth. | |||||||||||||
| TaprisaXEEthernetPortTable | 1.3.6.1.4.1.14817.7.3.1.2.96 | NA | |||||||||||
table · not-accessible · current Table used to control and monitor basic ethernet features on the 4-port hub. | |||||||||||||
| RaprisaXEEthernetPortEntry | 1.3.6.1.4.1.14817.7.3.1.2.96.1 | NA | |||||||||||
| CaprisaXEEthernetPortIndex | 1.3.6.1.4.1.14817.7.3.1.2.96.1.1 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current The port index, there are four ports on the hub. | |||||||||||||
| CaprisaXEEthernetAutonegotiationStatus | 1.3.6.1.4.1.14817.7.3.1.2.96.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the port auto-negotiation.
| |||||||||||||
| CaprisaXEEthernetRemoteFaultStatus | 1.3.6.1.4.1.14817.7.3.1.2.96.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the port remote fault detection.
| |||||||||||||
| CaprisaXEEthernetLinkStatus | 1.3.6.1.4.1.14817.7.3.1.2.96.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of the port link.
| |||||||||||||
| CaprisaXEEthernetJabberStatus | 1.3.6.1.4.1.14817.7.3.1.2.96.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Has jabber been detected on the port?.
| |||||||||||||
| CaprisaXEEthernetSpeed | 1.3.6.1.4.1.14817.7.3.1.2.96.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current port speed, 10 or 100 Mbps.
| |||||||||||||
| CaprisaXEEthernetDuplexMode | 1.3.6.1.4.1.14817.7.3.1.2.96.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current port duplex mode.
| |||||||||||||
| TaprisaXEEthernetTable | 1.3.6.1.4.1.14817.7.3.1.2.97 | NA | |||||||||||
table · not-accessible · current Table used to display and configure Ethernet settings. | |||||||||||||
| RaprisaXEEthernetTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.97.1 | NA | |||||||||||
| CaprisaXEEthernetPortNum | 1.3.6.1.4.1.14817.7.3.1.2.97.1.1 | AprisaXEEthernetPortNumber | RO | ||||||||||
column · AprisaXEEthernetPortNumber · read-only · current The port number, there are four ports on the hub. | |||||||||||||
| CaprisaXEEthernetGroup | 1.3.6.1.4.1.14817.7.3.1.2.97.1.2 | AprisaXEEthernetGroup | RW | ||||||||||
column · AprisaXEEthernetGroup · read-write · current The Ethernet Group of which this port is a member. | |||||||||||||
| CaprisaXEEthernetIngressRate | 1.3.6.1.4.1.14817.7.3.1.2.97.1.3 | AprisaXEEthernetFrameRate | RW | ||||||||||
column · AprisaXEEthernetFrameRate · read-write · current The ingress frame rate limit for this port. | |||||||||||||
| CaprisaXEEthernetPortPriority | 1.3.6.1.4.1.14817.7.3.1.2.97.1.4 | AprisaXEEthernetPortPriority | RW | ||||||||||
column · AprisaXEEthernetPortPriority · read-write · current Indicates the bandwidth allocated to this port. | |||||||||||||
| NaprisaXEEthernetVlanQosSettings | 1.3.6.1.4.1.14817.7.3.1.2.98 | ||||||||||||
| SaprisaXEEthernetGrouping | 1.3.6.1.4.1.14817.7.3.1.2.98.1 | AprisaXEEthernetGrouping | RW | ||||||||||
scalar · AprisaXEEthernetGrouping · read-write · current Indicates whether Ethernet grouping (VLANs) is enabled or disabled. | |||||||||||||
| SaprisaXEEthernetManagementGroup | 1.3.6.1.4.1.14817.7.3.1.2.98.2 | AprisaXEEthernetGroup | RO | ||||||||||
scalar · AprisaXEEthernetGroup · read-only · current The Ethernet Group for management. | |||||||||||||
| SaprisaXEEthernetPrioQueueScheduling | 1.3.6.1.4.1.14817.7.3.1.2.98.3 | AprisaXEEthernetPrioQueueScheduling | RW | ||||||||||
scalar · AprisaXEEthernetPrioQueueScheduling · read-write · current Indicates Ethernet priority queue scheduling scheme (either strict or weighted). | |||||||||||||
| SaprisaXEEthernetPrioQueueMapping | 1.3.6.1.4.1.14817.7.3.1.2.98.4 | AprisaXEEthernetPrioQueueMapping | RW | ||||||||||
scalar · AprisaXEEthernetPrioQueueMapping · read-write · current Indicates the IEEE 802.1 Ethernet priority queue mapping scheme (either standard or cisco). | |||||||||||||
| SaprisaXEDefaultEthernetGrouping | 1.3.6.1.4.1.14817.7.3.1.2.98.5 | AprisaXEDefaultAction | RW | ||||||||||
scalar · AprisaXEDefaultAction · read-write · current Indicates when Ethernet Grouping settings must be reset to default values. | |||||||||||||
| SaprisaXEDefaultEthernetQos | 1.3.6.1.4.1.14817.7.3.1.2.98.6 | AprisaXEDefaultAction | RW | ||||||||||
scalar · AprisaXEDefaultAction · read-write · current Indicates when Ethernet Grouping settings must be reset to default values. | |||||||||||||
| TaprisaXEInterfaceTable | 1.3.6.1.4.1.14817.7.3.1.2.100 | NA | |||||||||||
table · not-accessible · current Table used to monitor the current interface status. | |||||||||||||
| RaprisaXEInterfaceTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.100.1 | NA | |||||||||||
| CaprisaXEInterfaceIndex | 1.3.6.1.4.1.14817.7.3.1.2.100.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current The slot containing the interface card, slots 0 to 8 (AUX or A-H) inclusive may contain interface cards. | |||||||||||||
| CaprisaXEInterfaceType | 1.3.6.1.4.1.14817.7.3.1.2.100.1.2 | AprisaXECardType | RO | ||||||||||
column · AprisaXECardType · read-only · current Indicates the type of interface card. | |||||||||||||
| CaprisaXEInterfaceAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.100.1.3 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current Indicates the current alarm status for the interface. | |||||||||||||
| CaprisaXEInterfacePort1Bandwidth | 1.3.6.1.4.1.14817.7.3.1.2.100.1.4 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the bandwidth allocated to port 1. | |||||||||||||
| CaprisaXEInterfacePort2Bandwidth | 1.3.6.1.4.1.14817.7.3.1.2.100.1.5 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the bandwidth allocated to port 2. | |||||||||||||
| CaprisaXEInterfacePort3Bandwidth | 1.3.6.1.4.1.14817.7.3.1.2.100.1.6 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the bandwidth allocated to port 3. | |||||||||||||
| CaprisaXEInterfacePort4Bandwidth | 1.3.6.1.4.1.14817.7.3.1.2.100.1.7 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Indicates the bandwidth allocated to port 4. | |||||||||||||
| TaprisaXE4WirePortControlTable | 1.3.6.1.4.1.14817.7.3.1.2.110 | NA | |||||||||||
table · not-accessible · current Status and Control table for 4Wire. | |||||||||||||
| RaprisaXE4WirePortControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.110.1 | NA | |||||||||||
row · not-accessible · current Entries for 4wire table. | |||||||||||||
| CaprisaXE4WireConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.110.1.1 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated cross-connect Backplane Connection ID. | |||||||||||||
| CaprisaXE4WireSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.110.1.2 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for 4wire Status Control table. | |||||||||||||
| CaprisaXE4WirePortIndex | 1.3.6.1.4.1.14817.7.3.1.2.110.1.3 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Channel index for 4 Wire Control Status table. | |||||||||||||
| CaprisaXE4WireLoopback | 1.3.6.1.4.1.14817.7.3.1.2.110.1.4 | FourRFLoopback | RW | ||||||||||
column · FourRFLoopback · read-write · current Loopback control on or off for channels. | |||||||||||||
| CaprisaXE4WireAdpcmCompression | 1.3.6.1.4.1.14817.7.3.1.2.110.1.5 | AprisaXEAdpcmCompression | RW | ||||||||||
column · AprisaXEAdpcmCompression · read-write · current ADPCM compression 16, 24, 32, 64 kbps or none. | |||||||||||||
| CaprisaXE4WireRxGain | 1.3.6.1.4.1.14817.7.3.1.2.110.1.6 | AprisaXE4WRxGain | RW | obsolete | |||||||||
column · AprisaXE4WRxGain · read-write · obsolete Rx gain +4 dB to -14 dB in 0.5 dB steps. | |||||||||||||
| CaprisaXE4WireTxGain | 1.3.6.1.4.1.14817.7.3.1.2.110.1.7 | AprisaXE4WTxGain | RW | obsolete | |||||||||
column · AprisaXE4WTxGain · read-write · obsolete Tx gain +14 dB to -4 dB in half dB steps. | |||||||||||||
| CaprisaXE4WireEInvert | 1.3.6.1.4.1.14817.7.3.1.2.110.1.8 | AprisaXESignalState | RW | ||||||||||
column · AprisaXESignalState · read-write · current Controls E on each channel for NORMAL or INVERT polarity. | |||||||||||||
| CaprisaXE4WireMInvert | 1.3.6.1.4.1.14817.7.3.1.2.110.1.9 | AprisaXESignalState | RW | ||||||||||
column · AprisaXESignalState · read-write · current Controls M on each channel for NORMAL or INVERT polarity. | |||||||||||||
| CaprisaXE4WireSignalling | 1.3.6.1.4.1.14817.7.3.1.2.110.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enables or disables E&M signalling for the port.
| |||||||||||||
| CaprisaXE4WireSignallingConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.110.1.11 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated signalling cross-connect Backplane Connection ID. | |||||||||||||
| CaprisaXE4WireInputLevel | 1.3.6.1.4.1.14817.7.3.1.2.110.1.12 | AprisaXE4WInputLevel | RW | ||||||||||
column · AprisaXE4WInputLevel · read-write · current Input Level -14.0 dBr to +4.0 dBr in half dB steps. | |||||||||||||
| CaprisaXE4WireOutputLevel | 1.3.6.1.4.1.14817.7.3.1.2.110.1.13 | AprisaXE4WOutputLevel | RW | ||||||||||
column · AprisaXE4WOutputLevel · read-write · current Output Level -14.0 dBr to +4.0 dBr in 0.5 dB steps. | |||||||||||||
| TaprisaXE4WireStatusControlTable | 1.3.6.1.4.1.14817.7.3.1.2.121 | NA | |||||||||||
table · not-accessible · current Overall card control and status. | |||||||||||||
| RaprisaXE4WireStatusControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.121.1 | NA | |||||||||||
| CaprisaXE4WireStatusControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.121.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Index for table. | |||||||||||||
| CaprisaXE4WirePcmLaw | 1.3.6.1.4.1.14817.7.3.1.2.121.1.2 | AprisaXEPcmLaw | RW | ||||||||||
column · AprisaXEPcmLaw · read-write · current Sets A-law or u-law. | |||||||||||||
| TaprisaXEFXOPortControlTable | 1.3.6.1.4.1.14817.7.3.1.2.130 | NA | |||||||||||
table · not-accessible · current Port Control table for FXO. | |||||||||||||
| RaprisaXEFXOPortControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.130.1 | NA | |||||||||||
row · not-accessible · current Entries for FXO table. | |||||||||||||
| CaprisaXEFXOPortControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.130.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for FXO Control table. | |||||||||||||
| CaprisaXEFXOPortIndex | 1.3.6.1.4.1.14817.7.3.1.2.130.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port index for FXO Control table. | |||||||||||||
| CaprisaXEFXOLoopback | 1.3.6.1.4.1.14817.7.3.1.2.130.1.3 | FourRFLoopback | RW | ||||||||||
column · FourRFLoopback · read-write · current Loopback control on or off for ports. | |||||||||||||
| CaprisaXEFXOAdpcmCompression | 1.3.6.1.4.1.14817.7.3.1.2.130.1.4 | AprisaXEAdpcmCompression | RW | ||||||||||
column · AprisaXEAdpcmCompression · read-write · current ADPCM compression 16, 24, 32, 64 kbps or none. | |||||||||||||
| CaprisaXEFXORxGain | 1.3.6.1.4.1.14817.7.3.1.2.130.1.5 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Rx gain -10 dB to 10 dB in 0.5 dB steps.
| |||||||||||||
| CaprisaXEFXOTxGain | 1.3.6.1.4.1.14817.7.3.1.2.130.1.6 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Tx gain -10 dB to 10 dB in half dB steps.
| |||||||||||||
| CaprisaXEFXOConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.130.1.7 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated cross-connect Backplane Connection ID. | |||||||||||||
| CaprisaXEFXOSignallingConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.130.1.8 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated signalling cross-connect Backplane Connection ID. | |||||||||||||
| CaprisaXEFXOInputLevel | 1.3.6.1.4.1.14817.7.3.1.2.130.1.9 | AprisaXEFXOInputLevel | RW | ||||||||||
column · AprisaXEFXOInputLevel · read-write · current Input Level -10.0 dBr to +1.0 dBr in half dB steps. | |||||||||||||
| CaprisaXEFXOOutputLevel | 1.3.6.1.4.1.14817.7.3.1.2.130.1.10 | AprisaXEFXOOutputLevel | RW | ||||||||||
column · AprisaXEFXOOutputLevel · read-write · current Output Level -10.0 dBr to +1.0 dBr in 0.5 dB steps. | |||||||||||||
| TaprisaXEFXOControlTable | 1.3.6.1.4.1.14817.7.3.1.2.140 | NA | |||||||||||
table · not-accessible · current Control table for FXO. | |||||||||||||
| RaprisaXEFXOControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.140.1 | NA | |||||||||||
| CaprisaXEFXOControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.140.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for FXO Control table. | |||||||||||||
| CaprisaXEFXOSPMBandwidth | 1.3.6.1.4.1.14817.7.3.1.2.140.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the spm detector bandwidth to 1.5%, 3.5%, 5.5% or 7.5%.
| |||||||||||||
| CaprisaXEFXOSPMFrequency | 1.3.6.1.4.1.14817.7.3.1.2.140.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the spm detector frequency to 12kHz or 16kHz.
| |||||||||||||
| CaprisaXEFXOSPMLevel | 1.3.6.1.4.1.14817.7.3.1.2.140.1.4 | AprisaXEFXSPMLevel | RW | ||||||||||
column · AprisaXEFXSPMLevel · read-write · current Set the spm detector level 0 to 27 dB. | |||||||||||||
| CaprisaXEFXOCasMode | 1.3.6.1.4.1.14817.7.3.1.2.140.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the CAS mode to XE,SE or 4Wire compatible.
| |||||||||||||
| CaprisaXEFXOCasSignal | 1.3.6.1.4.1.14817.7.3.1.2.140.1.6 | AprisaXESignalState | RW | obsolete | |||||||||
column · AprisaXESignalState · read-write · obsolete Set the CAS signal to normal or invert. | |||||||||||||
| CaprisaXEFXOPCMLaw | 1.3.6.1.4.1.14817.7.3.1.2.140.1.7 | AprisaXEPcmLaw | RW | ||||||||||
column · AprisaXEPcmLaw · read-write · current Set the PCM law to A-law or u-law. | |||||||||||||
| CaprisaXEFXOOnHookSpeed | 1.3.6.1.4.1.14817.7.3.1.2.140.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the on hook speed to fast, medium or slow.
| |||||||||||||
| CaprisaXEFXORingerImpedance | 1.3.6.1.4.1.14817.7.3.1.2.140.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the ringer impedance to high or synthesized.
| |||||||||||||
| CaprisaXEFXORingerThreshold | 1.3.6.1.4.1.14817.7.3.1.2.140.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the ringer threshold to low, medium or high.
| |||||||||||||
| CaprisaXEFXOLoopCurrentLimit | 1.3.6.1.4.1.14817.7.3.1.2.140.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the loop current limiter to off or on.
| |||||||||||||
| CaprisaXEFXOMinLoopCurrent | 1.3.6.1.4.1.14817.7.3.1.2.140.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the min loop current to low, medium or high.
| |||||||||||||
| CaprisaXEFXOTipRingVoltage | 1.3.6.1.4.1.14817.7.3.1.2.140.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the tip ring voltage to low, medium or high.
| |||||||||||||
| CaprisaXEFXOLineImpedance | 1.3.6.1.4.1.14817.7.3.1.2.140.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms || 120 nF), TBR21 - 270 Ohms + (750 Ohms || 150 nF), BT3 - 370 Ohms + (620 Ohms || 310 nF), BT Network - 320 Ohms + (1050 Ohms || 210 nF), China - 200 Ohms + (680 Ohms || 100 nF)
| |||||||||||||
| CaprisaXEFXOLineReversal | 1.3.6.1.4.1.14817.7.3.1.2.140.1.15 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Set the line reversal on/off.
| |||||||||||||
| CaprisaXEFXOABitFault | 1.3.6.1.4.1.14817.7.3.1.2.140.1.16 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXOBBitRing | 1.3.6.1.4.1.14817.7.3.1.2.140.1.17 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXOCBitBilling | 1.3.6.1.4.1.14817.7.3.1.2.140.1.18 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXODBitReversals | 1.3.6.1.4.1.14817.7.3.1.2.140.1.19 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXOEchoCanceller | 1.3.6.1.4.1.14817.7.3.1.2.140.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the echo canceller to off, on or auto. The reserved values are for internal use only and cannot be set via SNMP.
| |||||||||||||
| CaprisaXEFXOABitOffHook | 1.3.6.1.4.1.14817.7.3.1.2.140.1.21 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| TaprisaXEBackplaneConnectionTable | 1.3.6.1.4.1.14817.7.3.1.2.150 | NA | |||||||||||
table · not-accessible · current Table of AprisaXE Cross connections. | |||||||||||||
| RaprisaXEBackplaneConnectionTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.150.1 | NA | |||||||||||
row · not-accessible · current Table entries define a circuit carried ove a TDM bus. | |||||||||||||
| CaprisaXEBackplaneConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.150.1.1 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Handle to associate circuits with backplane connections. | |||||||||||||
| CaprisaXEBackplaneTdmBus | 1.3.6.1.4.1.14817.7.3.1.2.150.1.2 | AprisaXETdmBus | RW | ||||||||||
column · AprisaXETdmBus · read-write · current TDM Bus to switch: busA - busD. | |||||||||||||
| CaprisaXEBackplaneStartBitPos | 1.3.6.1.4.1.14817.7.3.1.2.150.1.3 | INTEGER (0..2047) | RW | ||||||||||
column · INTEGER (0..2047) · read-write · current Start bit position on the associated TDM bus (0 - 2047). | |||||||||||||
| CaprisaXEBackplaneLength | 1.3.6.1.4.1.14817.7.3.1.2.150.1.4 | INTEGER (0..2047) | RW | ||||||||||
column · INTEGER (0..2047) · read-write · current Number of bits to place on the backplane TDM bus (0 - 2047). | |||||||||||||
| CaprisaXEBackplaneInterface | 1.3.6.1.4.1.14817.7.3.1.2.150.1.5 | AprisaXEInterfaceCnxnType | RW | ||||||||||
column · AprisaXEInterfaceCnxnType · read-write · current The type of circuit this backplane connection is carrying. | |||||||||||||
| TaprisaXEAggregateConnectionTable | 1.3.6.1.4.1.14817.7.3.1.2.160 | NA | |||||||||||
table · not-accessible · current Table of Aggregated backplane connections used for interfaces with further cross-connection capability. | |||||||||||||
| RaprisaXEAggregateConnectionTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.160.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CaprisaXEAggregateBackplaneID | 1.3.6.1.4.1.14817.7.3.1.2.160.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Backplane Connection identifier. | |||||||||||||
| CaprisaXEAggregateInterfaceID | 1.3.6.1.4.1.14817.7.3.1.2.160.1.2 | Integer32 | RO | ||||||||||
| CaprisaXEAggregateStartBitPos | 1.3.6.1.4.1.14817.7.3.1.2.160.1.3 | INTEGER (0..2047) | RO | ||||||||||
column · INTEGER (0..2047) · read-only · current Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection. | |||||||||||||
| CaprisaXEAggregateLength | 1.3.6.1.4.1.14817.7.3.1.2.160.1.4 | INTEGER (0..2047) | RO | ||||||||||
column · INTEGER (0..2047) · read-only · current Number of bits required for this interface connection. | |||||||||||||
| CaprisaXEAggregateOffset | 1.3.6.1.4.1.14817.7.3.1.2.160.1.5 | INTEGER (0..2047) | RO | ||||||||||
column · INTEGER (0..2047) · read-only · current Offset into the aggregate connection where this interface connection is placed. | |||||||||||||
| CaprisaXEAggregateE1Port | 1.3.6.1.4.1.14817.7.3.1.2.160.1.6 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port number associated with this connection. | |||||||||||||
| NaprisaXEAggregateControl | 1.3.6.1.4.1.14817.7.3.1.2.170 | ||||||||||||
| SaprisaXEAggregateControlBackplaneID | 1.3.6.1.4.1.14817.7.3.1.2.170.1 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current The backplane ID to add or delete. | |||||||||||||
| SaprisaXEAggregateControlInterfaceID | 1.3.6.1.4.1.14817.7.3.1.2.170.2 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current Aggregate connection identifier. | |||||||||||||
| SaprisaXEAggregateControlStartBitPos | 1.3.6.1.4.1.14817.7.3.1.2.170.3 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current Start bit position of the data coming into the cross-connection device (SWITI) for this interface connection. | |||||||||||||
| SaprisaXEAggregateControlLength | 1.3.6.1.4.1.14817.7.3.1.2.170.4 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current Number of bits required for this interface connection. | |||||||||||||
| SaprisaXEAggregateControlOffset | 1.3.6.1.4.1.14817.7.3.1.2.170.5 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current Offset into the aggregate connection where this interface connection is placed. | |||||||||||||
| SaprisaXEAggregateControlCommand | 1.3.6.1.4.1.14817.7.3.1.2.170.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to send to act upon the rows in the Aggregate Connection table.
| |||||||||||||
| NaprisaXEBackplaneControl | 1.3.6.1.4.1.14817.7.3.1.2.180 | ||||||||||||
| SaprisaXEBackplaneControlConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.180.1 | AprisaXEConnectionID | RW | ||||||||||
scalar · AprisaXEConnectionID · read-write · current The Backplane Connection ID to add or delete. | |||||||||||||
| SaprisaXEBackplaneControlTdmBus | 1.3.6.1.4.1.14817.7.3.1.2.180.2 | AprisaXETdmBus | RW | ||||||||||
scalar · AprisaXETdmBus · read-write · current TDM Bus to switch: busA - busD. | |||||||||||||
| SaprisaXEBackplaneControlStartBitPos | 1.3.6.1.4.1.14817.7.3.1.2.180.3 | INTEGER (0..2047) | RW | ||||||||||
scalar · INTEGER (0..2047) · read-write · current Start bit position on the associated TDM bus (0 - 2047). | |||||||||||||
| SaprisaXEBackplaneControlLength | 1.3.6.1.4.1.14817.7.3.1.2.180.4 | INTEGER (0..2048) | RW | ||||||||||
scalar · INTEGER (0..2048) · read-write · current Number of bits to place on the backplane TDM bus (0 - 2048). | |||||||||||||
| SaprisaXEBackplaneControlInterface | 1.3.6.1.4.1.14817.7.3.1.2.180.5 | AprisaXEInterfaceCnxnType | RW | ||||||||||
scalar · AprisaXEInterfaceCnxnType · read-write · current The type of circuit this backplane connection is carrying. | |||||||||||||
| SaprisaXEBackplaneControlCommand | 1.3.6.1.4.1.14817.7.3.1.2.180.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to send to act upon rows in the Backplane Connection table.
| |||||||||||||
| TaprisaXEFXSPortControlTable | 1.3.6.1.4.1.14817.7.3.1.2.190 | NA | |||||||||||
table · not-accessible · current Port Control table for FXS. | |||||||||||||
| RaprisaXEFXSPortControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.190.1 | NA | |||||||||||
row · not-accessible · current Entries for FXS table. | |||||||||||||
| CaprisaXEFXSPortControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.190.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for FXS Control table. | |||||||||||||
| CaprisaXEFXSPortIndex | 1.3.6.1.4.1.14817.7.3.1.2.190.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port index for FXS Control table. | |||||||||||||
| CaprisaXEFXSLoopback | 1.3.6.1.4.1.14817.7.3.1.2.190.1.3 | FourRFLoopback | RW | ||||||||||
column · FourRFLoopback · read-write · current Loopback control on or off for ports. | |||||||||||||
| CaprisaXEFXSAdpcmCompression | 1.3.6.1.4.1.14817.7.3.1.2.190.1.4 | AprisaXEAdpcmCompression | RW | ||||||||||
column · AprisaXEAdpcmCompression · read-write · current ADPCM compression 16, 24, 32, 64 kbps or none. | |||||||||||||
| CaprisaXEFXSRxGain | 1.3.6.1.4.1.14817.7.3.1.2.190.1.5 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Rx gain -9.5 dB to +3 dB in 0.5 dB steps.
| |||||||||||||
| CaprisaXEFXSTxGain | 1.3.6.1.4.1.14817.7.3.1.2.190.1.6 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Tx gain -3 dB to 9.5 dB in 0.5 dB steps.
| |||||||||||||
| CaprisaXEFXSConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.190.1.7 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated cross-connect Backplane Connection ID. | |||||||||||||
| CaprisaXEFXSSignallingConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.190.1.8 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated signalling cross-connect Backplane Connection ID. | |||||||||||||
| CaprisaXEFXSInputLevel | 1.3.6.1.4.1.14817.7.3.1.2.190.1.9 | AprisaXEFXSInputLevel | RW | ||||||||||
column · AprisaXEFXSInputLevel · read-write · current Input Level -9.0 dBr to +3.0 dBr in half dB steps. | |||||||||||||
| CaprisaXEFXSOutputLevel | 1.3.6.1.4.1.14817.7.3.1.2.190.1.10 | AprisaXEFXSOutputLevel | RW | ||||||||||
column · AprisaXEFXSOutputLevel · read-write · current Output Level -9.5 dBr to +2.5 dBr in 0.5 dB steps. | |||||||||||||
| CaprisaXEFXSPathMute | 1.3.6.1.4.1.14817.7.3.1.2.190.1.11 | AprisaXEFXSPathMute | RW | ||||||||||
column · AprisaXEFXSPathMute · read-write · current Applies DFXS Mute Function - No Mute, Mute Rx or Mute Tx. | |||||||||||||
| TaprisaXEFXSControlTable | 1.3.6.1.4.1.14817.7.3.1.2.195 | NA | |||||||||||
table · not-accessible · current Control table for FXS. | |||||||||||||
| RaprisaXEFXSControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.195.1 | NA | |||||||||||
| CaprisaXEFXSControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.195.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for FXS Control table. | |||||||||||||
| CaprisaXEFXSPCMLaw | 1.3.6.1.4.1.14817.7.3.1.2.195.1.2 | AprisaXEPcmLaw | RW | ||||||||||
column · AprisaXEPcmLaw · read-write · current Set the PCM law to A-law or u-law. | |||||||||||||
| CaprisaXEFXSEchoCanceller | 1.3.6.1.4.1.14817.7.3.1.2.195.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the echo canceller to on or off.
| |||||||||||||
| CaprisaXEFXSBillingToneFrequency | 1.3.6.1.4.1.14817.7.3.1.2.195.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the billing tone generator frequency to 12kHz or 16kHz.
| |||||||||||||
| CaprisaXEFXSBillingToneAmplitude | 1.3.6.1.4.1.14817.7.3.1.2.195.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the billing tone generator amplitude to 400mV, 300mV, 250mV, 200mV, 150mV, 100mV or 50mV. Note, that software release 7.3.x only supports 400mV, 300mV, 200mV and 100mV.
| |||||||||||||
| CaprisaXEFXSBillingToneDecay | 1.3.6.1.4.1.14817.7.3.1.2.195.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the billing tone generator attack decay ramp to 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms or 20ms.
| |||||||||||||
| CaprisaXEFXSRingerFrequency | 1.3.6.1.4.1.14817.7.3.1.2.195.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the ringer frequency to 17Hz, 25Hz or 50Hz.
| |||||||||||||
| CaprisaXEFXSRingerAmplitude | 1.3.6.1.4.1.14817.7.3.1.2.195.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the ringer amplitude to 40 V RMS, 45 V RMS, 50 V RMS, 55 V RMS or 60 V RMS.
| |||||||||||||
| CaprisaXEFXSLineImpedance | 1.3.6.1.4.1.14817.7.3.1.2.195.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the subscriber line impedance to 600 Ohms, 900 Ohms, 600 Ohms + 2.16 uF, 900 Ohms + 2.16 uF, TN12 - 220 Ohms + (820 Ohms || 120 nF), TBR21 - 270 Ohms + (750 Ohms || 150 nF), BT3 - 370 Ohms + (620 Ohms || 310 nF)
| |||||||||||||
| CaprisaXEFXSCasMode | 1.3.6.1.4.1.14817.7.3.1.2.195.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the CAS mode to XE,SE or 4Wire compatible.
| |||||||||||||
| CaprisaXEFXSCasSignal | 1.3.6.1.4.1.14817.7.3.1.2.195.1.11 | AprisaXESignalState | RW | obsolete | |||||||||
column · AprisaXESignalState · read-write · obsolete Set the CAS signal to normal or invert. | |||||||||||||
| CaprisaXEFXSTransHybridBalance | 1.3.6.1.4.1.14817.7.3.1.2.195.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the trans hybrid balance to 4.08dB, 2.5dB, 1.16dB, 0dB, -1.02dB, -1.94dB, -2.77dB, Off
| |||||||||||||
| CaprisaXEFXSLineReversal | 1.3.6.1.4.1.14817.7.3.1.2.195.1.13 | INTEGER | RW | obsolete | |||||||||
column · INTEGER · read-write · obsolete Set the line reversal on/off.
| |||||||||||||
| CaprisaXEFXSCalibrate | 1.3.6.1.4.1.14817.7.3.1.2.195.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Recalibrate the card yes/no.
| |||||||||||||
| CaprisaXEFXSABitFault | 1.3.6.1.4.1.14817.7.3.1.2.195.1.15 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS A fault bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXSBBitRing | 1.3.6.1.4.1.14817.7.3.1.2.195.1.16 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS B ring bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXSCBitBilling | 1.3.6.1.4.1.14817.7.3.1.2.195.1.17 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS C billing bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXSDBitReversals | 1.3.6.1.4.1.14817.7.3.1.2.195.1.18 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS D reversals bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| CaprisaXEFXSLoopParameters | 1.3.6.1.4.1.14817.7.3.1.2.195.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set the loop parameters to 'default' or 'Telkom SA Limited'.
| |||||||||||||
| CaprisaXEFXSABitOffHook | 1.3.6.1.4.1.14817.7.3.1.2.195.1.20 | AprisaXE2WireSignalState | RW | ||||||||||
column · AprisaXE2WireSignalState · read-write · current Set the CAS A off hook bit to Transparent Normal, Transparent Inverted, Forced Normal or Forced Inverted. | |||||||||||||
| NaprisaXECrossConnectControl | 1.3.6.1.4.1.14817.7.3.1.2.200 | ||||||||||||
| SaprisaXECrossConnectControlCommand | 1.3.6.1.4.1.14817.7.3.1.2.200.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command to send to delete all current cross-connections or to activate a new set of cross-connections.
| |||||||||||||
| SaprisaXEMotherboardExtendedModeCapable | 1.3.6.1.4.1.14817.7.3.1.2.200.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Allows the cross connect application to determine whether to stripe cross connections or not.
| |||||||||||||
| SaprisaXEEthernetActivationStatus | 1.3.6.1.4.1.14817.7.3.1.2.200.3 | AprisaXECCActivationStatus | RO | ||||||||||
scalar · AprisaXECCActivationStatus · read-only · current Ethernet activation status i.e activated, failed or currently busy activating. | |||||||||||||
| TaprisaXECCActivationStatusTable | 1.3.6.1.4.1.14817.7.3.1.2.202 | NA | |||||||||||
table · not-accessible · current CC Activation status table. | |||||||||||||
| RaprisaXECCActivationStatusTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.202.1 | NA | |||||||||||
row · not-accessible · current Entries for CC Activation status table. | |||||||||||||
| CaprisaXECCActivationStatusSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.202.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for CC Activation Status table. | |||||||||||||
| CaprisaXECCActivationStatus | 1.3.6.1.4.1.14817.7.3.1.2.202.1.2 | AprisaXECCActivationStatus | RO | ||||||||||
column · AprisaXECCActivationStatus · read-only · current Cross-connect activation status i.e activated, failed or currently busy activating. | |||||||||||||
| TaprisaXEHSSControlTable | 1.3.6.1.4.1.14817.7.3.1.2.207 | NA | |||||||||||
table · not-accessible · current Control table for HSS. | |||||||||||||
| RaprisaXEHSSControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.207.1 | NA | |||||||||||
| CaprisaXEHSSControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.207.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for HSS Control Table. | |||||||||||||
| CaprisaXEHSSConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.207.1.2 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Backplane Connection ID for data connection. | |||||||||||||
| CaprisaXEHSSSignallingID | 1.3.6.1.4.1.14817.7.3.1.2.207.1.3 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Backplane connection ID for signalling/control connection. | |||||||||||||
| CaprisaXEHSSEquipmentMode | 1.3.6.1.4.1.14817.7.3.1.2.207.1.4 | AprisaXESerialEquipmentMode | RO | ||||||||||
column · AprisaXESerialEquipmentMode · read-only · current Terminal Equipment mode, DCE or DTE, this is a direct reflection of the equipment mode based on the type of cable currently connected. The value is not defined if no cable is attached. | |||||||||||||
| CaprisaXEHSSLoopback | 1.3.6.1.4.1.14817.7.3.1.2.207.1.5 | FourRFLoopback | RW | ||||||||||
column · FourRFLoopback · read-write · current Interface loopback control. | |||||||||||||
| CaprisaXEHSSNetworkClockSource | 1.3.6.1.4.1.14817.7.3.1.2.207.1.6 | FourRFNetworkClockSelect | RW | ||||||||||
column · FourRFNetworkClockSelect · read-write · current Controls whether the port drive the clock source or not. | |||||||||||||
| CaprisaXEHSSSerialBaudRate | 1.3.6.1.4.1.14817.7.3.1.2.207.1.7 | INTEGER (1..256) | RW | ||||||||||
column · INTEGER (1..256) · read-write · current Serial Baud rate where 1 = 8kbps and 256 = 2Mbps. | |||||||||||||
| CaprisaXEHSSV110BaudRate | 1.3.6.1.4.1.14817.7.3.1.2.207.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current V110 baud rate.
| |||||||||||||
| CaprisaXEHSSSendHandshakingMode | 1.3.6.1.4.1.14817.7.3.1.2.207.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Select 1 of 8 RTS/CTS modes of operation.
| |||||||||||||
| CaprisaXEHSSDataReadyMode | 1.3.6.1.4.1.14817.7.3.1.2.207.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Select 1 of 8 DSR/DTR modes.
| |||||||||||||
| CaprisaXEHSSCarrierDetectMode | 1.3.6.1.4.1.14817.7.3.1.2.207.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Select 1 of 4 DCD modes.
| |||||||||||||
| CaprisaXEHSSClockSelection | 1.3.6.1.4.1.14817.7.3.1.2.207.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Select the clock mode internal to the HSS traffic path.
| |||||||||||||
| CaprisaXEHSSXTxCEnabled | 1.3.6.1.4.1.14817.7.3.1.2.207.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Select whether XTxC generation is enabled or disabled for the port. The default is enabled.
| |||||||||||||
| CaprisaXEHSSSerialMode | 1.3.6.1.4.1.14817.7.3.1.2.207.1.14 | AprisaXEHssSerialMode | RO | ||||||||||
column · AprisaXEHssSerialMode · read-only · current Indicates the type of serial interface cable is connected to the HSS port. | |||||||||||||
| TaprisaXEV24PortControlTable | 1.3.6.1.4.1.14817.7.3.1.2.210 | NA | |||||||||||
table · not-accessible · current Port Control table for V24. | |||||||||||||
| RaprisaXEV24PortControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.210.1 | NA | |||||||||||
row · not-accessible · current Entries for V24 table. | |||||||||||||
| CaprisaXEV24PortControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.210.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for V24 Control table. | |||||||||||||
| CaprisaXEV24PortIndex | 1.3.6.1.4.1.14817.7.3.1.2.210.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port index for V24 Control table. | |||||||||||||
| CaprisaXEV24BaudRate | 1.3.6.1.4.1.14817.7.3.1.2.210.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Baud Rate from 300 baud to 115200 baud.
| |||||||||||||
| CaprisaXEV24Loopback | 1.3.6.1.4.1.14817.7.3.1.2.210.1.4 | FourRFLoopback | RW | ||||||||||
column · FourRFLoopback · read-write · current Loopback control on or off for ports. | |||||||||||||
| CaprisaXEV24DataBits | 1.3.6.1.4.1.14817.7.3.1.2.210.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current No of data bits used, 7 or 8.
| |||||||||||||
| CaprisaXEV24StopBits | 1.3.6.1.4.1.14817.7.3.1.2.210.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current No of stop bits used, 1 or 2.
| |||||||||||||
| CaprisaXEV24ParityBits | 1.3.6.1.4.1.14817.7.3.1.2.210.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current No of parity bits used, 0 or 1.
| |||||||||||||
| CaprisaXEV24ConnectionID | 1.3.6.1.4.1.14817.7.3.1.2.210.1.8 | AprisaXEConnectionID | RW | ||||||||||
column · AprisaXEConnectionID · read-write · current Associated cross-connect Backplane Connection ID. | |||||||||||||
| TaprisaXEDualJetBoardTable | 1.3.6.1.4.1.14817.7.3.1.2.220 | NA | |||||||||||
table · not-accessible · current Table of Dual E1 card specific configuration details. | |||||||||||||
| RaprisaXEDualJetBoardEntry | 1.3.6.1.4.1.14817.7.3.1.2.220.1 | NA | |||||||||||
| CaprisaXEDualJetBoardTableIndex | 1.3.6.1.4.1.14817.7.3.1.2.220.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Dual E1 board indexed by slot. | |||||||||||||
| TaprisaXEDualJetPortTable | 1.3.6.1.4.1.14817.7.3.1.2.221 | NA | |||||||||||
table · not-accessible · current Table based on slot and port of DualJet cards alarms. | |||||||||||||
| RaprisaXEDualJetPortEntry | 1.3.6.1.4.1.14817.7.3.1.2.221.1 | NA | |||||||||||
row · not-accessible · current Dual E1 port alarms. | |||||||||||||
| CaprisaXEDualJetPortTableSlot | 1.3.6.1.4.1.14817.7.3.1.2.221.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Port table index based on slot number. | |||||||||||||
| CaprisaXEDualJetPortTablePort | 1.3.6.1.4.1.14817.7.3.1.2.221.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port table index based on port number. | |||||||||||||
| CaprisaXEDualJetAISAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.221.1.3 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current AIS alarm status. | |||||||||||||
| CaprisaXEDualJetAISAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.221.1.4 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current AIS alarm severity. | |||||||||||||
| CaprisaXEDualJetAISAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.221.1.5 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current AIS alarm enabled or disabled. | |||||||||||||
| CaprisaXEDualJetLOSAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.221.1.6 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current LOS alarm status. | |||||||||||||
| CaprisaXEDualJetLOSAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.221.1.7 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current LOS alarm severity. | |||||||||||||
| CaprisaXEDualJetLOSAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.221.1.8 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current LOS alarm enabled or disabled. | |||||||||||||
| TaprisaXEDualJetIFConfigTable | 1.3.6.1.4.1.14817.7.3.1.2.222 | NA | |||||||||||
table · not-accessible · current Switch data table which describes the allocation of user data on to the TDM busses. | |||||||||||||
| RaprisaXEDualJetIFConfigEntry | 1.3.6.1.4.1.14817.7.3.1.2.222.1 | NA | |||||||||||
row · not-accessible · current Dual JET config data. | |||||||||||||
| CaprisaXEDualJetIFConfigSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.222.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Index to the port table based on port number. | |||||||||||||
| CaprisaXEDualJetIFConfigPortIndex | 1.3.6.1.4.1.14817.7.3.1.2.222.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Index to the port table based on port number. | |||||||||||||
| CaprisaXEDualJetTrafficType | 1.3.6.1.4.1.14817.7.3.1.2.222.1.3 | AprisaXEQuadJetTrafficType | RW | ||||||||||
column · AprisaXEQuadJetTrafficType · read-write · current Controls the traffic type on a Dual JET port. | |||||||||||||
| CaprisaXEDualJetLoopback | 1.3.6.1.4.1.14817.7.3.1.2.222.1.4 | FourRFLoopback | RW | obsolete | |||||||||
column · FourRFLoopback · read-write · obsolete Controls the traffic loopback on a Dual JET port. | |||||||||||||
| CaprisaXEDualJetLineEncoding | 1.3.6.1.4.1.14817.7.3.1.2.222.1.5 | AprisaXEQuadJetLineEncoding | RW | ||||||||||
column · AprisaXEQuadJetLineEncoding · read-write · current Controls the line encoding, the default is HDB3 for E1, B8ZS for T1. | |||||||||||||
| CaprisaXEDualJetPcmMode | 1.3.6.1.4.1.14817.7.3.1.2.222.1.6 | AprisaXEPcmMode | RW | ||||||||||
column · AprisaXEPcmMode · read-write · current Controls the PCM mode, PCM31 or PCM30C. | |||||||||||||
| CaprisaXEDualJetClockSource | 1.3.6.1.4.1.14817.7.3.1.2.222.1.7 | FourRFNetworkClockSelect | RW | ||||||||||
column · FourRFNetworkClockSelect · read-write · current Controls whether the port drives the clock soure or not. | |||||||||||||
| CaprisaXEDualJetLineRadioLoopback | 1.3.6.1.4.1.14817.7.3.1.2.222.1.8 | AprisaXEQuadJetLoopbacks | RW | ||||||||||
column · AprisaXEQuadJetLoopbacks · read-write · current This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing. | |||||||||||||
| CaprisaXEDualJetTxWaveFormShaper | 1.3.6.1.4.1.14817.7.3.1.2.222.1.9 | AprisaXEQuadJetWaveFormShapers | RW | ||||||||||
column · AprisaXEQuadJetWaveFormShapers · read-write · current This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft. | |||||||||||||
| TaprisaXESingleJetBoardTable | 1.3.6.1.4.1.14817.7.3.1.2.225 | NA | |||||||||||
table · not-accessible · current Table of Single E1 card specific configuration details. | |||||||||||||
| RaprisaXESingleJetBoardEntry | 1.3.6.1.4.1.14817.7.3.1.2.225.1 | NA | |||||||||||
| CaprisaXESingleJetBoardTableIndex | 1.3.6.1.4.1.14817.7.3.1.2.225.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Single E1 board indexed by slot. | |||||||||||||
| TaprisaXESingleJetPortTable | 1.3.6.1.4.1.14817.7.3.1.2.226 | NA | |||||||||||
table · not-accessible · current Table based on slot and port of SingleJet cards alarms. | |||||||||||||
| RaprisaXESingleJetPortEntry | 1.3.6.1.4.1.14817.7.3.1.2.226.1 | NA | |||||||||||
row · not-accessible · current Single E1 port alarms. | |||||||||||||
| CaprisaXESingleJetPortTableSlot | 1.3.6.1.4.1.14817.7.3.1.2.226.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Port table index based on slot number. | |||||||||||||
| CaprisaXESingleJetPortTablePort | 1.3.6.1.4.1.14817.7.3.1.2.226.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Port table index based on port number. | |||||||||||||
| CaprisaXESingleJetAISAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.226.1.3 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current AIS alarm status. | |||||||||||||
| CaprisaXESingleJetAISAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.226.1.4 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current AIS alarm severity. | |||||||||||||
| CaprisaXESingleJetAISAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.226.1.5 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current AIS alarm enabled or disabled. | |||||||||||||
| CaprisaXESingleJetLOSAlarmStatus | 1.3.6.1.4.1.14817.7.3.1.2.226.1.6 | FourRFAlarmStatus | RO | ||||||||||
column · FourRFAlarmStatus · read-only · current LOS alarm status. | |||||||||||||
| CaprisaXESingleJetLOSAlarmSeverity | 1.3.6.1.4.1.14817.7.3.1.2.226.1.7 | FourRFAlarmSeverity | RO | ||||||||||
column · FourRFAlarmSeverity · read-only · current LOS alarm severity. | |||||||||||||
| CaprisaXESingleJetLOSAlarmEnabled | 1.3.6.1.4.1.14817.7.3.1.2.226.1.8 | FourRFAlarmEnabled | RO | ||||||||||
column · FourRFAlarmEnabled · read-only · current LOS alarm enabled or disabled. | |||||||||||||
| TaprisaXESingleJetIFConfigTable | 1.3.6.1.4.1.14817.7.3.1.2.227 | NA | |||||||||||
table · not-accessible · current Switch data table which describes the allocation of user data on to the TDM busses. | |||||||||||||
| RaprisaXESingleJetIFConfigEntry | 1.3.6.1.4.1.14817.7.3.1.2.227.1 | NA | |||||||||||
row · not-accessible · current Single JET config data. | |||||||||||||
| CaprisaXESingleJetIFConfigSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.227.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Index to the port table based on port number. | |||||||||||||
| CaprisaXESingleJetIFConfigPortIndex | 1.3.6.1.4.1.14817.7.3.1.2.227.1.2 | AprisaXEPortNumber | RO | ||||||||||
column · AprisaXEPortNumber · read-only · current Index to the port table based on port number. | |||||||||||||
| CaprisaXESingleJetTrafficType | 1.3.6.1.4.1.14817.7.3.1.2.227.1.3 | AprisaXEQuadJetTrafficType | RW | ||||||||||
column · AprisaXEQuadJetTrafficType · read-write · current Controls the traffic type on a Single JET port. | |||||||||||||
| CaprisaXESingleJetLoopback | 1.3.6.1.4.1.14817.7.3.1.2.227.1.4 | FourRFLoopback | RW | obsolete | |||||||||
column · FourRFLoopback · read-write · obsolete Controls the traffic loopback on a Single JET port. | |||||||||||||
| CaprisaXESingleJetLineEncoding | 1.3.6.1.4.1.14817.7.3.1.2.227.1.5 | AprisaXEQuadJetLineEncoding | RW | ||||||||||
column · AprisaXEQuadJetLineEncoding · read-write · current Controls the line encoding, the default is HDB3 for E1, B8ZS for T1. | |||||||||||||
| CaprisaXESingleJetPcmMode | 1.3.6.1.4.1.14817.7.3.1.2.227.1.6 | AprisaXEPcmMode | RW | ||||||||||
column · AprisaXEPcmMode · read-write · current Controls the PCM mode, PCM31 or PCM30C. | |||||||||||||
| CaprisaXESingleJetClockSource | 1.3.6.1.4.1.14817.7.3.1.2.227.1.7 | FourRFNetworkClockSelect | RW | ||||||||||
column · FourRFNetworkClockSelect · read-write · current Controls whether the port drives the clock soure or not. | |||||||||||||
| CaprisaXESingleJetLineRadioLoopback | 1.3.6.1.4.1.14817.7.3.1.2.227.1.8 | AprisaXEQuadJetLoopbacks | RW | ||||||||||
column · AprisaXEQuadJetLoopbacks · read-write · current This indicates the E1 loopback setting on a port; OFF, Line or Radio Facing. | |||||||||||||
| CaprisaXESingleJetTxWaveFormShaper | 1.3.6.1.4.1.14817.7.3.1.2.227.1.9 | AprisaXEQuadJetWaveFormShapers | RW | ||||||||||
column · AprisaXEQuadJetWaveFormShapers · read-write · current This indicates the T1 Tx Waveform Shaper for a port; 0~133 ft, 133~266 ft, 266~399 ft, 399~533 ft, 533~655 ft. | |||||||||||||
| TaprisaXEPSCControlTable | 1.3.6.1.4.1.14817.7.3.1.2.230 | NA | |||||||||||
table · not-accessible · current Control table for PSC. | |||||||||||||
| RaprisaXEPSCControlTableEntry | 1.3.6.1.4.1.14817.7.3.1.2.230.1 | NA | |||||||||||
| CaprisaXEPSCControlSlotIndex | 1.3.6.1.4.1.14817.7.3.1.2.230.1.1 | AprisaXESlotNumber | RO | ||||||||||
column · AprisaXESlotNumber · read-only · current Slot index for PSC Control Table. | |||||||||||||
| CaprisaXEPSCActiveRadio | 1.3.6.1.4.1.14817.7.3.1.2.230.1.2 | AprisaXEPSCActiveRadio | RW | ||||||||||
column · AprisaXEPSCActiveRadio · read-write · current Indicates the reception mode of the PSC. | |||||||||||||
| CaprisaXEPSCActiveTx | 1.3.6.1.4.1.14817.7.3.1.2.230.1.3 | AprisaXEPSCActiveTx | RO | ||||||||||
column · AprisaXEPSCActiveTx · read-only · current Indicates the currently active transmitter. | |||||||||||||
| SaprisaXEPSCDemodAlignmentStatusPSC | 1.3.6.1.4.1.14817.7.3.1.2.230.1.4 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the demodulator alignment on the PSC. | |||||||||||||
| SaprisaXEPSCDemodAlignmentStatusPIC | 1.3.6.1.4.1.14817.7.3.1.2.230.1.5 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current Status of the demodulator alignment on the PIC. | |||||||||||||
| NaprisaXEHSDParameterCompare | 1.3.6.1.4.1.14817.7.3.1.2.235 | ||||||||||||
| SaprisaXEHSDParameterMismatch | 1.3.6.1.4.1.14817.7.3.1.2.235.1 | FourRFAlarmStatus | RO | ||||||||||
scalar · FourRFAlarmStatus · read-only · current If there is a parameter (OID) mismatch between Radio A and Radio B | |||||||||||||
| SaprisaXEHSDParameterCompareChecking | 1.3.6.1.4.1.14817.7.3.1.2.235.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables/disables HSD paramter compare checking between Radio A and Radio B
| |||||||||||||
| NaprisaXESoftwareUpgradeControl | 1.3.6.1.4.1.14817.7.3.1.2.300 | ||||||||||||
| SaprisaXESoftwareUpgradeVersion | 1.3.6.1.4.1.14817.7.3.1.2.300.1 | DisplayString (SIZE (0..16)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..16)) · read-write · current New software version details of the form x_y_z. | |||||||||||||
| SaprisaXESoftwareUpgradeCommand | 1.3.6.1.4.1.14817.7.3.1.2.300.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Command used to instigate a software upgrade.
| |||||||||||||
| SaprisaXESoftwareUpgradeResult | 1.3.6.1.4.1.14817.7.3.1.2.300.3 | FourRFProcessResultType | RO | ||||||||||
scalar · FourRFProcessResultType · read-only · current Status of a software upgrade, this will have to be polled to follow the upload progress. | |||||||||||||
| NaprisaXEEvents | 1.3.6.1.4.1.14817.7.3.1.3 | ||||||||||||
node · current The root of the OID sub-tree for the AprisaXE product events. | |||||||||||||
| NaprisaXEEventsV2 | 1.3.6.1.4.1.14817.7.3.1.3.0 | ||||||||||||
node · current The AprisaXE product events, ensures SNMPv1 compatibility. | |||||||||||||
| NaprisaXETestObjects | 1.3.6.1.4.1.14817.7.3.1.4 | ||||||||||||
node · current The root of the OID sub-tree for the AprisaXE test objects. | |||||||||||||
Groups and compliance
- aprisaXEAlarmControlGroup
- aprisaXEExternalAlarm1Group
- aprisaXEExternalAlarm2Group
- aprisaXEExternalAlarmOutputFourGroup
- aprisaXEExternalAlarmOutputOneGroup
- aprisaXEExternalAlarmOutputThreeGroup
- aprisaXEExternalAlarmOutputTwoGroup
- aprisaXEExternalAlarmsGroup
- aprisaXEFanGroup
- aprisaXEForwardPowerHiAlarmsGroup
- aprisaXEForwardPowerLoAlarmsGroup
- aprisaXEHSDParameterCompareGroup
- aprisaXEMHSBGroup
- aprisaXEModemGroup
- aprisaXEPerformanceGroup
- aprisaXERemoteAlarmGroup
- aprisaXEReturnLossHiAlarmsGroup
- aprisaXEReversePowerHiAlarmsGroup
- aprisaXEReversePowerLoAlarmsGroup
- aprisaXERx12VAlarmsGroup
- aprisaXERx3V3HiAlarmsGroup
- aprisaXERx3V3LoAlarmsGroup
- aprisaXERx5VHiAlarmsGroup
- aprisaXERx5VLoAlarmsGroup
- aprisaXERx9VHiAlarmsGroup
- aprisaXERx9VLoAlarmsGroup
- aprisaXERxADCChEightHiAlarmsGroup
- aprisaXERxADCChEightLoAlarmsGroup
- aprisaXERxADCChFiveHiAlarmsGroup
- aprisaXERxADCChFiveLoAlarmsGroup
- aprisaXERxADCChFourHiAlarmsGroup
- aprisaXERxADCChFourLoAlarmsGroup
- aprisaXERxADCChNineHiAlarmsGroup
- aprisaXERxADCChNineLoAlarmsGroup
- aprisaXERxADCChOneHiAlarmsGroup
- aprisaXERxADCChOneLoAlarmsGroup
- aprisaXERxADCChSevenHiAlarmsGroup
- aprisaXERxADCChSevenLoAlarmsGroup
- aprisaXERxADCChSixHiAlarmsGroup
- aprisaXERxADCChSixLoAlarmsGroup
- aprisaXERxADCChTenHiAlarmsGroup
- aprisaXERxADCChTenLoAlarmsGroup
- aprisaXERxADCChThreeHiAlarmsGroup
- aprisaXERxADCChThreeLoAlarmsGroup
- aprisaXERxADCChTwoHiAlarmsGroup
- aprisaXERxADCChTwoLoAlarmsGroup
- aprisaXERxADCChZeroHiAlarmsGroup
- aprisaXERxADCChZeroLoAlarmsGroup
- aprisaXERxAgcHiAlarmsGroup
- aprisaXERxAgcLoAlarmsGroup
- aprisaXERxEEAlarmsGroup
- aprisaXERxNeg1V5HiAlarmsGroup
- aprisaXERxNeg1V5LoAlarmsGroup
- aprisaXERxRssiHiAlarmsGroup
- aprisaXERxRssiLoAlarmsGroup
- aprisaXERxSynthOutOfLockAlarmsGroup
- aprisaXERxVtuneHiAlarmsGroup
- aprisaXERxVtuneLoAlarmsGroup
- aprisaXESoftwareUpgradeControlGroup
- aprisaXETReceiverGroup
- aprisaXETerminalGroup
- aprisaXETransmitterGroup
- aprisaXETx11VHiAlarmsGroup
- aprisaXETx11VLoAlarmsGroup
- aprisaXETx28VHiAlarmsGroup
- aprisaXETx28VLoAlarmsGroup
- aprisaXETx5VDigHiAlarmsGroup
- aprisaXETx5VDigLoAlarmsGroup
- aprisaXETx7VRfHiAlarmsGroup
- aprisaXETx7VRfLoAlarmsGroup
- aprisaXETx9VHiAlarmsGroup
- aprisaXETx9VLoAlarmsGroup
- aprisaXETxADCChEightHiAlarmsGroup
- aprisaXETxADCChEightLoAlarmsGroup
- aprisaXETxADCChElevenHiAlarmsGroup
- aprisaXETxADCChElevenLoAlarmsGroup
- aprisaXETxADCChFiveHiAlarmsGroup
- aprisaXETxADCChFiveLoAlarmsGroup
- aprisaXETxADCChFourHiAlarmsGroup
- aprisaXETxADCChFourLoAlarmsGroup
- aprisaXETxADCChNineHiAlarmsGroup
- aprisaXETxADCChNineLoAlarmsGroup
- aprisaXETxADCChOneHiAlarmsGroup
- aprisaXETxADCChOneLoAlarmsGroup
- aprisaXETxADCChSevenHiAlarmsGroup
- aprisaXETxADCChSevenLoAlarmsGroup
- aprisaXETxADCChSixHiAlarmsGroup
- aprisaXETxADCChSixLoAlarmsGroup
- aprisaXETxADCChTenHiAlarmsGroup
- aprisaXETxADCChTenLoAlarmsGroup
- aprisaXETxADCChThreeHiAlarmsGroup
- aprisaXETxADCChThreeLoAlarmsGroup
- aprisaXETxADCChTwoHiAlarmsGroup
- aprisaXETxADCChTwoLoAlarmsGroup
- aprisaXETxADCChZeroHiAlarmsGroup
- aprisaXETxADCChZeroLoAlarmsGroup
- aprisaXETxAgcHiAlarmsGroup
- aprisaXETxAgcLoAlarmsGroup
- aprisaXETxPaTempAlarmsGroup
- aprisaXETxPaTempWarnAlarmsGroup
- aprisaXETxSynthOutOfLockAlarmsGroup
- aprisaXETxVtuneHiAlarmsGroup
- aprisaXETxVtuneLoAlarmsGroup