A3COM0352-STACK-CONFIG
3Comsnmptranslate -m A3COM0352-STACK-CONFIG -Tpsnmpwalk -v2c -c <community> -m A3COM0352-STACK-CONFIG <host> 1.3.6.1.4.1.43.0.89Imports
| A3COM0004-GENERIC | superStackIIconfig |
|---|---|
| A3Com-products-MIB | a3Com |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| !unitDeparture | 1.3.6.1.4.1.43.0.89 | ||||||||||||
notification This trap is raised by the lowest numbered unit in a stack when a communications loss is detected to another unit. The raising of this trap is optional.
| |||||||||||||
| NstackConfiguration | 1.3.6.1.4.1.43.10.27.1 | ||||||||||||
| TstackConfigTable | 1.3.6.1.4.1.43.10.27.1.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory The main table of configuration data. | |||||||||||||
| RstackConfigEntry | 1.3.6.1.4.1.43.10.27.1.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory The configuration entry for a unit in the stack.
| |||||||||||||
| CstackUnitLocation | 1.3.6.1.4.1.43.10.27.1.1.1.1 | INTEGER | NA | mandatory | |||||||||
column · INTEGER · not-accessible · mandatory Used to identify individual units in the stack. Note that this value will usually be contiguous, but that gaps may be present due, for example, to unpowered units. | |||||||||||||
| CstackUnitAddress | 1.3.6.1.4.1.43.10.27.1.1.1.2 | PhysAddress | RO | mandatory | |||||||||
column · PhysAddress · read-only · mandatory Every conformant unit in the SuperStack II system will have a unique physical (MAC) address by which it can be recognised. Note that the location index on this table can change if a unit is inserted into the stack and so the location can not be used to uniquely identify a location. Instead an application should refer to units by their physical address - see stackUnitAddress below. | |||||||||||||
| CstackUnitLastReset | 1.3.6.1.4.1.43.10.27.1.1.1.3 | TimeTicks | RO | mandatory | |||||||||
column · TimeTicks · read-only · mandatory This is the time in hundredths of a second, since this unit last reset (ie the unit's concept of sysUpTime). Note that if a unit is not operational then this object will report zero (0). | |||||||||||||
| CstackUnitType | 1.3.6.1.4.1.43.10.27.1.1.1.4 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This is an integer type identifier for this unit. The values of this integer are administered by allocating a MIB object identifier for each type of unit from a common branch. The value of this object is then the last level in that identifier. The values are defined in 3Com RFC 0025. Note that the values are unlikely to be contiguous. Note that if a type value is not available for this unit then this object will return zero. There are several reasons why this value may not be available through this view of the MIB. One reason may be that the device is not currently active (dead) or that the information is only available through the units own agent (see stackUnitManagementType). | |||||||||||||
| CstackUnitDesc | 1.3.6.1.4.1.43.10.27.1.1.1.5 | DisplayString | RO | mandatory | Switch 4200 | ||||||||
column · DisplayString · read-only · mandatory This is a text string which describes this unit. If a unit cannot provide a name then the value of this object will be an empty string. Example values from LibreNMS test devices
| |||||||||||||
| CstackUnitName | 1.3.6.1.4.1.43.10.27.1.1.1.6 | DisplayString (SIZE (0..30)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..30)) · read-write · mandatory This is a simple text string which can be used by an application to assign a text name to a unit. By default this string is empty. If a management application writes a text string to this object the device will store the string in non-volatile storage. | |||||||||||||
| CstackUnitState | 1.3.6.1.4.1.43.10.27.1.1.1.7 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This object represents the best known state of a unit in the stack. The unknown state is not expected to be used, but may exist because of loosely integrated components in the stack. Management applications MUST EXPECT to see the 'unknown' value. The other states are as follows: unitInactive: The device appears to be in the stack but does not appear to be in an operational state. unitOperational: The unit is sending out periodic identification messages and indicates that it is operational, running its complete image. unitLoading: The unit is running in a special operational mode which means that it is unmanaged while it loads a new operational code image. unitAwaitReset: The unit has accomplished a successful software upgrade and is waiting for the remaining units in the stack to successfully complete their upgrades and enter this state before resetting the system. If any unit transitions from unitLoading to any other state than unitAwaitReset, then the units in the unitAwaitReset state will not reset and will transition to unitOperational. Implementations of this object that do not synchronize stack-wide resets after software upgrades will reset immediately after the unitLoading state is completed and never transition to unitAwaitReset.
| |||||||||||||
| CstackUnitManagementType | 1.3.6.1.4.1.43.10.27.1.1.1.8 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This object can be used to determine the management
method used to access the agent in this unit. The options are:
unknown: The unit has not reported any management
capability. It is either faulty or a
non-conformant device.
distributed: This unit can be managed using the SuperStackII
distributed management architecture and so is
managed through this agent. The unit may or may
not have an active comms stack. If it has then
the addresses for that agent can be determined
from the address table.
intelligent: The unit has its own SNMP agent which is accessed
seperately. The agent is not part of the SSII
distributed management architecture.
| |||||||||||||
| CstackUnitCapabilities | 1.3.6.1.4.1.43.10.27.1.1.1.9 | OCTET STRING | RO | mandatory | 07:09:14:15:17:1a:1b:1c:1e:20:21:22:23:25:26:28… | ||||||||
column · OCTET STRING · read-only · mandatory This object describes the capabilities of this particular unit. This is used in conjunction with the upgrade level of the stack to enable a management application to correctly enable and disable the various features of the application depending on the capabilities of the unit. The object is an octet string, where each octet represents a capability of the unit. Different capabilities will be added to the list as required. The current list of values is: 0x01 Full RMON 0x02 3Com Proprietary Resilience MIB 0x03 3Com Repeater Security MIB 0x04 PSHub Port Switching 0x05 PSHub Capability Upgrade Facility 0x06 Dual Speed Hub Capability Upgrade Facility 0x07 TelNet 0x08 Web 0x14 SMA Resource Allocator 0x15 SMA Distributed SNMP 0x16 SMA Global Variables 0x17 SMA Licence Server 0x18 PSHub Cascade Switch 0x19 PSH Load Balancing 0x1a RPC 0x1b Internal SNMP 0x1c Mapper 0x1d Distributed RMON 0x1e Lazy ACK 0x1f Resilience switchback 0x20 Security II 0x21 RMON Email 0x22 Rapid Spanning Tree (RSTP) 0x23 Link Aggregation Control Protocol (LACP) 0x24 L4 Redirection (WEB cache) 0x25 Device IP Configuration (DHCP) 0x26 Revised Global Port Numbering 0x27 Local Trunk Forwarding 0x28 Improved TFTP Upgrade 0x29 802.1x Network Login 0x2a RADIUS Client 0x2b Layer 3 Stacking 0x2c SW Variant 0x2d Jag3 Mode 0x2e Jag6 Mode 0x2f QoS Support of RSTP Applications 0x30 Multiple Agent Images 0x31 Power over Ethernet 0x32 OSPF 0x33 Trusted IP 0x34 Secure Shell (SSH) 0x35 Configurable management VLAN 0x36 Manual L4 cache configuration 0x37 STP Ignore Mode 0x38 MAC-address Based Network Access 0x39 Simple Network Time Protocol Client 0x3a System Logger 0x3b IGMP V3 So, for example, if a unit has a value of '02 03' for this object then it supports repeater resilience and security, but no other features such as RMON. Example values from LibreNMS test devices
| |||||||||||||
| CstackUnitPromVersion | 1.3.6.1.4.1.43.10.27.1.1.1.10 | DisplayString | RO | mandatory | 2.03 | ||||||||
column · DisplayString · read-only · mandatory This is the version number of the PROM on the unit. If the unit has no PROM, does not correctly report the PROM version or is currently non-operational then this object will return an empty string. Example values from LibreNMS test devices
| |||||||||||||
| CstackUnitHWVersion | 1.3.6.1.4.1.43.10.27.1.1.1.11 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory This is the hardware version of this unit, expressed as a string. Note that if the hardware version is not available for this particular unit then the version string will be empty. | |||||||||||||
| CstackUnitSWVersion | 1.3.6.1.4.1.43.10.27.1.1.1.12 | DisplayString | RO | mandatory | 3.00 | ||||||||
column · DisplayString · read-only · mandatory This is the software version number of this unit. The software version number is a string. Note that if a unit does not make its version number information available, or the unit has no software, then this object will report an empty string. Example values from LibreNMS test devices
| |||||||||||||
| CstackUnitSerialNumber | 1.3.6.1.4.1.43.10.27.1.1.1.13 | DisplayString | RO | mandatory | L3ZV7LJ6449A0 | ||||||||
column · DisplayString · read-only · mandatory This is the serial number for this unit. The number is globally unique and expressed as a textual string. Example values from LibreNMS test devices
| |||||||||||||
| CstackUnitAttention | 1.3.6.1.4.1.43.10.27.1.1.1.14 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Some of the units in the stack will contain a mechanism for drawing attention to that unit. This is useful for directing maintainance personnel. The method often employed is for a special LED, or by placing some other LED into a flashing state. This object gives access to the attention mechanism for a unit. Note that if a unit does not support this mechanism then reading the value of this object will return 'no-such-name' error.
| |||||||||||||
| CstackUnitMgmtInterface | 1.3.6.1.4.1.43.10.27.1.1.1.15 | INTEGER (0..65535) | RO | mandatory | |||||||||
column · INTEGER (0..65535) · read-only · mandatory If a unit in the stack participates in the distributed SNMP stack (stackUnitManagementType = 'distributed') then it will have an instance of this object. The object points to the entry in the interface table which represents the potential management interface for this unit. That is the index to use in the ifTable for this device. Note that if the value of this object is zero, or the result of reading this object is NO-SUCH-NAME then there is no management interface available on that unit. | |||||||||||||
| CstackUnitSummary | 1.3.6.1.4.1.43.10.27.1.1.1.16 | OCTET STRING | RO | mandatory | |||||||||
column · OCTET STRING · read-only · mandatory This object provides a summary of this units configuration in order to improve the performance of the management applications. The information in this object is represented as a list of items, each item is a type-length-value triplet which will have a basic encoding. The information encoded in this string will be determined by the requirements of the management applications. The contents of this object is separately defined for each device. Note: This object has been replaced by 3Com RFCs 0341, 0342 and 0343 for some devices. | |||||||||||||
| CstackUnitSlipMgmtInterface | 1.3.6.1.4.1.43.10.27.1.1.1.17 | INTEGER (0..65535) | RO | mandatory | |||||||||
column · INTEGER (0..65535) · read-only · mandatory If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object(stackUnitManagementType = 'distributed'). The object points to the entry in the interface table which represents the potential SLIP (serial port) management interface for this unit. That is the index to use in the ifTable for this device. Note that if the value of this object is zero, or the result of reading this object is NO-SUCH-NAME then there is no SLIP access port available on that unit. | |||||||||||||
| CstackUnitNotepad | 1.3.6.1.4.1.43.10.27.1.1.1.18 | OCTET STRING (SIZE (0..512)) | RW | mandatory | |||||||||
column · OCTET STRING (SIZE (0..512)) · read-write · mandatory This object is used to store user-specified data regarding this unit. The user may store any relevant data about the unit. This may include its floor location, history or other details. The unit stores the data in non-volatile storage so that the data is not lost over a normal reset. The data will be cleared if the unit is returned to factory defaults. A maximum of 512 characters of data may be stored in this object. This object can be treated as a displayString. In the MIB it is defined as an OCTET STRING since displayStrings are not allowed to be more than 255 characters in length. | |||||||||||||
| CstackUnitProductNumber | 1.3.6.1.4.1.43.10.27.1.1.1.19 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory This is a textual representation of the unit's product number. Note that if a unit does not make its product number information available then this object will report an empty string. | |||||||||||||
| TstackBankSwapTable | 1.3.6.1.4.1.43.10.27.1.2 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A table of the agent software versions and status for all agents stored in flash | |||||||||||||
| RstackBankSwapEntry | 1.3.6.1.4.1.43.10.27.1.2.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory A table entry showing the bank identifier, software version and status for each agent. | |||||||||||||
| CstackBankSwapId | 1.3.6.1.4.1.43.10.27.1.2.1.1 | INTEGER | NA | mandatory | |||||||||
column · INTEGER · not-accessible · mandatory Identifier for an agent location in the system. | |||||||||||||
| CstackBankSwapSWVersion | 1.3.6.1.4.1.43.10.27.1.2.1.2 | DisplayString | RO | mandatory | |||||||||
column · DisplayString · read-only · mandatory Software version for the software in this bank. If a valid agent is not present in the bank, then an empty string is returned. | |||||||||||||
| CstackBankSwapStatus | 1.3.6.1.4.1.43.10.27.1.2.1.3 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Status of a bank location. This object should be set
prior to loading new software to indicate when that
new software will become active. This object can only
be written for banks not in the active(1) state as
the software download process will always load into a
bank not in the active(1) state.
active(1) read-only - the agent is currently running.
New software will not be loaded into a bank
in this state. An error will be returned if
an attempt is made to set this value.
activeOnLoad(2) read-write - the agent is currently
inactive. If new software is successfully
loaded into a bank in this state, then the
stackBankSwapNextActive object is
automatically set to nextActive(1) for this
bank and an immediate reboot occurs, thereby
making stackBankSwapStatus active(1) and
stackBankNextActive nextActive(1) after the
reboot. This is the default state for a
bank when it is not active(1).
inactiveOnLoad(3) read-write - the agent is currently
inactive. If an attempt is made to load new
software into this bank, then after the
attempt, the box is not rebooted and the
stackBankNextActive object is left
unaffected.
| |||||||||||||
| CstackBankSwapNextActive | 1.3.6.1.4.1.43.10.27.1.2.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory This object indicates which bank contains the
software that will be running after the next reboot.
The supported values include:
nextActive(1) read-write - If set, then the software
contained in this bank will be running after
the next reboot. Only one bank may have
nextActive(1) set. When using this state,
it is assumed that the software in this bank
may become active at any time since a reboot
may occur unexpectedly for many reasons.
nextActivePostLoad(2) read-write - If set, then the
software in this bank will be marked as
active after the next reboot after the
next successful software upgrade to this
bank. If the upgrade is successful, this
object will be automatically set to
nextActive(1) for this bank. If the upgrade
is unsuccessful, it will be automatically
set to notNextActive(3).
notNextActive(3) read-only - This bank does not
contain the software that will be active
after the next reboot. An error will be
returned if this value is written. When
nextActive(1) is written to a bank, the
other banks are automatically set to
notNextActive(3).
| |||||||||||||
| NstackAddressInformation | 1.3.6.1.4.1.43.10.27.2 | ||||||||||||
| TstackAddressTable | 1.3.6.1.4.1.43.10.27.2.1 | NA | mandatory | ||||||||||
table · not-accessible · mandatory This table contains entries for units in the stack which have active inband communications stacks. The table comprises of a set of entries for each unit, each entry representing a single address. Note that the address information in this table cannot be changed! This table is required specifically for those units which execute their own SNMP agents without taking part in the Arnie co-operative agent. I.e., the only devices for which there will be an entry in this table are those for which the stackUnitManagementType is 'Intelligent'. | |||||||||||||
| RstackAddressEntry | 1.3.6.1.4.1.43.10.27.2.1.1 | NA | mandatory | ||||||||||
row · not-accessible · mandatory | |||||||||||||
| CstackAddressNumber | 1.3.6.1.4.1.43.10.27.2.1.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This identifies one of a number of different addresses for this unit. This is a second index column for this table, the first being the unit number shared with the stackConfigTable (stackUnitLocation). | |||||||||||||
| CstackAddressType | 1.3.6.1.4.1.43.10.27.2.1.1.2 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory This identifies the type of address.
| |||||||||||||
| CstackAddress | 1.3.6.1.4.1.43.10.27.2.1.1.3 | OCTET STRING | RO | mandatory | |||||||||
column · OCTET STRING · read-only · mandatory The address. | |||||||||||||
| NstackSysObjIdentities | 1.3.6.1.4.1.43.10.27.4 | ||||||||||||
| NstackUnitTypes | 1.3.6.1.4.1.43.10.27.5 | ||||||||||||
Traps / Notifications
- unitDeparture
1.3.6.1.4.1.43.0.89